Loading
Loading…
Loading…
Tender Value
₹3.4 Cr
EMD Value
₹6.8 L
Closing Date
27 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
FD II/LKO
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Similar nature for this work is "CTR/TRR/TFR/TTR including raising of track, screening, distressing of track, pre & post works for track maintenance machine like tamping machines/ ballast screening/regulating machines & TTR by T- 28". is for technical experience/competence of advertised work in terms of Pr. Chief Engineer Circular No. 610 (Revised-3). As per the HQ/NDLS letter No. 74- W/0/Pt.XXV/Similar Nature of Works/WA dated 22-01-2020 (S. No. 5(c)).
17 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/ We have visited the works site and I / We am / are aware of the site conditions.
Miscellaneous track maintenance work in the section of ADEN/AYC under the jurisdiction of Sr.DEN-V/LKO (Estt. No. 37-2026).
01-SrDEN-V-LKO-2026-27
01-SrDEN-V-LKO-2026-27
Open
Works - General
9 Months
Lucknow, Uttar Pradesh
₹0
₹6.8 L
27 Apr 2026
30 Mar 2026
13 Apr 2026
105 items across 10 schedules · ₹3,33,87,564.19 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | For Casual/Scattered Rail Renewal work | RM | 2500.00 | 40.73 | 1,01,825 |
| 2 | For Casual/Scattered Rail Renewal work | RM | 2500.00 | 43.13 | 1,07,825 |
| 3 | Fish plates of 6 bolts. | Joint | 400.00 | 299.22 | 1,19,688 |
| 4 | For 1.00m long fishplates | Joint | 1000.00 | 118.51 | 1,18,510 |
| 5 | Opening and refixing of Joggled fish plates provided to weld joints/rail of any rail section under traffic to enable examination of weld/rail by departmental official nominated by Engineer In charge and lubrication of fishplates by applying departmental Grease graphite grade 'O' (IS:408) to fishing planes and bolts by departmental black oil as per procedure laid down in latest version of IRPWM, including all tools required and as directed by Engineer- in-charge. Note: 1. Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for work shall be given by department and issued at concerned SSE/PW Stores. 2.Jammed fish bolts shall be cut using chisel and hammer and replaced with new bolt. | Set | 300.00 | 60.27 | 18,081 |
| 6 | Lubrication of Elastic Rail Clips on PSC sleepers with contractor's grease, conforming to Railway's specifications, labour etc. complete as per procedure prescribed in latest edition of IRPWM. | ERC | 10000.00 | 3.34 | 33,400 |
| 7 | Lubrication of Elastic Rail Clips on PSC sleepers as per procedure prescribed in latest edition of IRPWM with Railway's grease. | ERC | 80000.00 | 2.7 | 2,16,000 |
| 8 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC | 10000.00 | 57.7 | 5,77,000 |
| 9 | Lubrication of gauge face of rail on curves, cross overs, points & crossings, turn-in curves and at locations as required with contractor's grease graphite grade "O" IS 408 and as directed. | RM | 20000.00 | 3.77 | 75,400 |
| 10 | By using Railway's Grease graphite | Each | 50000.00 | 35.07 | 17,53,500 |
| 11 | GRSP | Each | 25000.00 | 23.91 | 5,97,750 |
| 12 | ERCs | Each | 25000.00 | 7.98 | 1,99,500 |
| 13 | Metal/GFN Liners | Each | 25000.00 | 5.32 | 1,33,000 |
| 14 | On Cess | Each | 20.00 | 244.74 | 4,894.8 |
| 15 | In-situ situation | Each | 20.00 | 361.49 | 7,229.8 |
| 16 | On Cess | Each | 300.00 | 318.16 | 95,448 |
| 17 | In-situ situation | Each | 300.00 | 495.79 | 1,48,737 |
| 18 | Hole of dia. 26.5mm and above | Each | 1000.00 | 259.11 | 2,59,110 |
| 19 | Hole of dia. below 26.5mm | Each | 500.00 | 167.64 | 83,820 |
| 20 | Rail section of 52Kg and above | Each | 200.00 | 110.37 | 22,074 |
| 21 | Renewal of existing SEJ along with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading all new materials to site, transportation of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 15.00 | 8,768.91 | 1,31,533.65 |
| 22 | Under Traffic Block Conditions | Set | 20.00 | 8,331.81 | 1,66,636.2 |
| Schedule total | ₹49,70,962.45 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
01-TenderDocument_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .