Providing Installing Testing Commissioning and Handing over of Central Medical Gases System in Mother and Child Care Centre at Block K, Sector - 32A, Chandigarh.

MEDICAL COMPRESSED AIR SYSTEM,

Supplying Installing Testing and Commissioning of Medical Air Compressor System, Multi drive control mode, Screw/ Scroll air compressor with foundation, Filteration system, receiver, Electrical panel, Electrical connection from pump to control panel and all as required as per specification. Entire system shall be installed as a package and compatible to fulfill the demand of system. Product should be as per specification. As per approved make attached. The Medical Air Compressor System should be supplied in Duplex System 1 set with 2 Nos. Compressors each of 125 CFM with 3538 Ltr Capacity alongwith minimum 20 KW Electric Motor with FAD (+/ - 5%) in each set. Make Compressor :- Garden Denver/ Hitachi/ Anest-Lwata / Atlas Copco/ Ingersol Rand/ Kirloskar/ Medepha Italy Make Air Drier:- Trident / Summits / Del Air/ Medepha Italy/ Reanimed (Turkey)/ Cms UK

Detail of 1 set components of system is as under:-

Air compressor with capacity 3538 Ltr. (22KW/ 125 Cfm) FAD (+/- 5%) with suitable motor as required. = (2 Nos.)

Air Receiver Tank 1500 Ltr. = (1 No.)

Air Filteration Set as per specification.= (1 No.)

Air Dryer of 150 cfm capacity= (1 No.)

Auto Drain Valve = (1 No.)

Part B

MEDICAL VACCUM CENTRAL SYSTEM

Supplying Installing Testing and Commissioning of Rotary Vane Vacuum Pump of 300 cfm capacity with foundation, Electrical Panel, Electrical connection from pump to control panel, Reciver tank , interconnecting copper pipe line from pump to reciver tank including cost of required size isolation valve , NRV etc. and all other material as required as per specification. Entire system shall be installed as a package and compatable to fulfill the demand of system. Product should be as per specification. As per approved make attached. a) M3/hr capacity - 500 m3/hr b) Nominal Air Flow - 300 cfm c) Pumping Speed - 290 cfm d) Oil- Synthetic Oil e) Oil Capacity - Minimum 10 Ltr. f) Noise Level- Less than 100 dB(A) g) Speed - 1000 RPM h) Motor Power - 10 KW or More i) Vacuum Receiver tank 2000 Ltr. J) Pressure Switch - 1 No. k) Vacuum Baterial Filter = 1 No. Make ANEST IWATA / Hitachi / Atlas Copco/ Busch/ Garden Denver/ Edward/ Medepha Italy/ Sigma

SITC Ward Vacuum Unit - Regulator capable of controlling vacuum between 0 to 760 mm Hg and Polycorbonate autoclayble, resuable type receiver jar of not less 600 ml. Vacuum regulator shall have a dial gauge, on/off switch, valve control knob and as per specifications and as required. with suitable attachement steel adopter/probe, connecting flexible pipes of Minimum 1 Mtr. Lenght or as per site requirement to Entire Satisfaction of EIC Product should be as per specification. Make : Aktiv/ NSP/ MDD/ MPS/ HMP/ Sigma

SITC Oxygen Flow Meter - Made from brass, chrome plated. It shall be back pressure comphesated type having housing of Polysulfane autoclayble resuable flow range 0-15 LPM. Fitted with matching adopter for oxygen outlet point and humidifier shall be compatible with flowmeter and reusable and as per specifications and as required.with suitable attachment steel adopter/prob. Product should be as per specification. Make: Aktiv/ Perfect/ HMP/ MDD/ MPS/ Sigma/ NSP/ MR/ MEC/ Reanimed (Turkey)

Copper Piping:- SITC of copper pipes for Medical Gases complete with elbows, flanges, specials, others fittings, and steel supports. The copper pipe should be of soild drawn seamless deoxidized, non-arsenical, tempered and of degreased material conforming to BS-EN 13348:2016/ASTM B819, of copper pipe. must be certified and inspected by third party inspection agency like Lloyd/ Kite/ SGS only. All copper pipes should be medical grade degreased & delivered capped at both ends. The Copper pipes should be accompanised with manufacturer test certificate for the physical properties and chemical composition. Make Maxflow/ Mandev/ Rajco tubes

12mm OD x 0.9 MM

15mm OD x 1.0 MM

22mm OD x 1.0 MM

28mm OD x 1.0 MM

42mm OD x 1.2 MM

54mm OD x 1.2 MM

Isolation valve - Providing and fixing of isolation vlaves and all valves are to be ball valves type and PTFE or Teflon seals. They shall be suitable for a working pressure of 10.2 Kg/cm² gauge. Valves shall be fitted into the pipeline by means of capillary hard soldered joints containing silver. it should be open/close with help of handel with rotation of 90 degree with brass fitting at both end for medical gas pipe line. Make: Legris /Matrix /Aduco /Cimberio (Cim)/ Medepha (Italy)

SITC of Modular Bed Head Panel with provision of gas outlet, eletrical, 1500 mm long (size as per site) made of high grade of aluminium. Fabricated by extrusion method and powder coated having provision of Gas Outlets (4-6 Nos.) and provided with electrical switches and sockets set minimum 12 Nos. of double arrangment of 5/15 Amp, socket & switches as per approved colors. as per specification and drawing, Make Aktiv, GM Medical, NSP, Competent Medical, MDD, MPS, Linde, Prime Technologies, Synergic, Sigma, MR, MEC

Supply, Installation Testing, Commissioning of gas lockable AVSU/CONTROL-CLOSING VALVE BOXES (INTEGRATED WITH AREA ALARM) with integrated alarm system as per specifications, and as required. Product should be as per specification. As per approved make attached. Make: Drager/Ohio/Medicop/Becon-Medas/Pneumatech (UK), Tritech Medical (USA), Allied Healthcare (USA), Delta P (Italy), Medepha Italy/ Reanimed (Turkey)/ Cms UK

Must have Gas Pressure alarm facility LED digital display, audio visual feature

must have data logging feature

Must have emergency feed facility in case of shutdown for intrepted supply

SS sheet construction, CE certified/UL Listed with relevant notified no. on it as required, entry/ exist of gases from upward direction

3 Services (Oxygen, MA-4, Vacuum)

4 Services (Oxygen, MA-4, Nitrous Oxide,Vacuum)

5 Services

Master Main Alarm including all Gases

Terminal Outlets:- SITC of Terminal Outlets gas specific for the services indicated (viz. O2, Air & Vacuum) and to accept only compatible quick connect Geometric Index type steel adapters as HTM/NFPA standard, CE Certified/UL Listed as per drawings and as required. product should be as per specification. Make: Medicop/ Amico/ Becon-Medas/ Drager/ Ohio/ Tritech Medical (USA), Allied Healthcare (USA), Delta P (Italy)/ AMICO/ Reanimed (Turkey)/ Cms UK

Oxygen Outlet

Vacuum Outlet

Air-4 Outlet

Air-7 Outlet

Nitrous Oxide Outlet