138WE/L-10/2025-26

Amount

Supply and fix for 200mm dia MS ERW pipe heavy grade 'C' Class complete heavy grade class, 'C' with welded ends laid in ducts over the angle iron supports/ fixed on the walls including fittings complete and taking down old rusted pipe any size all as specified and directed by Engr-in-Charge. (Note : The item rate is inclusive of cutting to any levels/ shapes like elbows, tees, bends etc, welding joints wherever necessary as per the site requirement)

All as per item No.1 above but of size 150mm

All as per item No.1 above but of size 100mm

All as per item No.1 above but of size 80mm

All as per item No.1 above but of size 50mm

All as per item No.1 above but of size 40mm

All as per item No.1 above but of size 32mm

All as per item No.1 above but of size 25mm

All as per item No.1 above but of size 20mm

M&L for Cast iron Butterfly valve of size 150 mm dia Class PN 1.6 with SG Iron Dice flanged ends (integrally cast) horizontal type, conforming to IS-14846 (ISI marked) with stainless steel spindle and iron wheel non rising type including jointing material complete such as rubber or fibre board insertion packing rings with requisite numbers of nuts, bolts & washers etc complete all as specified and directed. Make : Sant/ KIRLOSKAR/ TATA/ LEADER/ L&T or equivalent approved make as approved by GE.

All as Above item no 10 but 100mm dia

All as above item no 10 but 80mm dia

Supply and fix non return valve ISI marked flanged ends with by pass arrangements of size 100 mm dia bore complete all as specified and directed by Engr-in-Charge.

Supply and fix Y strainer ISI marked flanged ends with by pass arrangements of size 200 mm dia bore complete all as specified and directed by Engr-in-Charge.

S&F of cast iron sluice valve 200 mm dia with CI drilled flanged ends class PN 1.6 confirming with IS incl stainless steel spindle and iron wheel including jointing material complete such as rubber packing rings of adequate size and requisite number of nuts bolts and washer complete all as specified and directed by Engr-in-Charge.

S&F of cast iron sluice valve 100 mm dia with CI drilled flanged ends class PN 1.6 confirming with IS incl stainless steel spindle and iron wheel including jointing material complete such as rubber packing rings of adequate size and requisite number of nuts bolts and washer complete including item No 10 to 16 taking out existing unserviceable valve any size all as specified and directed by Engr-in-Charge.

Supply and fix PUF insulation for MS ERW pipe of size 200mm bore with PUF slab 40 mm thick and applying bituminuous compound and Aluminium cladding with 26 gauge GI sheet complete including complete earthwork for clearance around the pipe compete all as specifid and as directed.

All as per item No.17 above but of size 150mm

All as per item No.17 above but of size 100mm

All as per item No.17 above but of size 80mm

Supply and fix PUF insulation for MS ERW pipe of size 50mm bore with PUF slab 30 mm thick and applying bituminuous compound and Aluminium cladding with 26 gauge GI sheet complete including complete earthwork for clearance around the pipe compete all as specifid and as directed.

All as per item No.21 above but of size 40mm

All as per item No.21 above but of size 32mm

Supply and fix in of inlet forged brass ball valve 20 mm with Y Stainer for FCU, hot water for -25 to 90 degree temperature as per existing, including Supply and fix GI nipple of size 3/4 inch including welding work, cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve complete all as specified and directed

Supply and fix Forged steel globe valve, bolted bonnet outside screw & yoke type rising stem Size 20mm including welding work, cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve complete all as specified and directed.

All as per item No.25 above but of size 40 mm

All as per item No.25 above but of size 50 mm

Supply and fix Forged MS globe valve double side flanged End as per BS 10921-PN 16 Size 20mm including welding work, cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve complete all as specified and directed.

All as per item No 28 above but of size 25 mm

All as per item No.28 above but of size 32 mm

All as per item No.28 above but of size 40mm

All as per item No.28 above but of size 50 mm

Supply and fix Forged MS globe valve Y Stainer double side flanged End as per BS 10921-PN 16 Size 20mm including welding work, cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve complete all as specified and directed.

All as per item No.33 above but of size 25 mm

All as per item No.33 above but of size 32 mm

All as per item No.33 above but of size 40mm

All as per item No.33 above but of size 50 mm

Supply and fix in Brass nipple Threaded size 20 mm for Floor Mounting FCU to Flexible pipe laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

Supply and fix Brass Tee Threaded size for 20 mm for connecting double FCU in Flexible Pipe to Flexible pipe laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

Supply and fix Brass flare nuts of size 20 mm bore and fix the brass valves/ FCUs including taking out existing unserviceable valve including item No 24 to 40 taking out existing unserviceable valve,Nipple etc any size at any loc complete all as specified and directed.

Supply and fix in Multi layer composite Flexible Pipe of FCU connection size 20/16 mm as per existing, complete all as specified and directed. Make- Jindal/ Unipro Mecto or equivalent approved make as approved by GE.

M&L for cleaning of MS overhead storage tank of capacity 5000 Ltr including all type of T&P and chemical required for the same, including welding work to leakage surface including opening and refixing the existing insulating materials to the external surface of storage tank.

M&L for painting of boiler 10lakh kilo/ cal outer chamber with two coats of synthetic enamel paint of approved quality and shade over one coat of red oxide primer after preparing the surface outer complete all as specified and directed.

Disconnecting old existing unserviceable motor with pump and supply and fix Vertical Type Multi stage Motor with pump 3 phase 415 volts of capacity 7.5 HP (5.5 KW) discharge not less than 45M3/H and Head 30M with Mechanical seal complete fittings with accessories as per existing make and size suitable for existing pipeline, complete all as specified and directed. Make :Groundfos,IPC or equivalent approved make as approved by GE.

Dismantling of boiler capacity 10 lakh kilo/cal/hr disconnecting all electric/ fuel/ water connection of unsv glycol tubing to isolate combustion chamber of boiler and with help of tripod and chain pully without damaging internal chamber and Supply and fix of Boiler Coil for 10 lakh kilo/cal/Hr capacity Central Heating Plant as per existing shape size & dimension as per manufactures recommendation all as specified and directed by Engr-in-Charge. Make : Aquatherm,Themax or equivalent approved make as approved by GE.

Supply and fix for Pressure gauge 100mm dia, rating 0 to 80 Kg/Sqcm including taking out existing unserviceable gauge complete all as specified and directed. Make :AE/ IEBIG or equivalent approved make as approved by GE.

Supply and fix in High pressure fuel pipe 3 mtr as per existing, complete all as specified and directed.

Supply and fix in diesel filter as per existing (upto 5 ltrs) complete all as directed by Engr-in-Charge

Supply and fix in burner nozzle suitable for 10 Lakh K Cal/Hr complete all as directed by Engr-in-Charge

Supply and fix in sequence controller LOA 24 for burner rod assembly of 10 Lakh K Cal/Hour, complete all as specified and directed . Make- Siemens or equivalent approved make as approved by GE..

Supply and fix in Ignition Transformer electronic type suitable for 10 Lakh K Cal/hr burner rod assembly, complete all as specified and directed. Make- Denforce or equivalent approved make as approved by GE.

Supply and fix of Chilled/ Hot Water wall mounting indoor type Fan Coil Unit 600 /1.5TR (CFM/TR) Capacity incl 02 Nos of 20mm valve with stainer (inlet&outlet) incl heavy duty PVC pipe for connection complete all as specified and directed by Engr-In-Charge.

Supply and fix of Chilled/ Hot Water Fan coil Unit (FCU) vertical type Floor Mounting 600/1.5TR (CFM/TR) Capacity complete all as specified and directed by Engr-In-Charge. Make : ISI Marked.

Supply and fix of Chilled/Hot Water Fan coil Unit (FCU) vertical type Floor Mounting 600/2TR (CFM/TR) Capacity complete all as specified and directed by Engr-In-Charge. Make : ISI Marked equivalent approved make as approved by GE.

Supply only MCCB 4 pole with fixed thermal and fixed magnectic release, 400 Amps having rupturing capacity 35 KA all as specified and directed.

Supply only MCCB 3 pole with fixed thermal and fixed magnectic release, 63 to 100 Amps having rupturing capacity 16 KA all as specified and directed.

Supply only three pole power contactor, 415 Volts, ML-4, Conforms to IS/IEC 60947-4-1 & IEC 60947-4-1, Rating 70A for AC-3 & 100A for AC-1, l Robust and suitable for hostile applications for street light control including electric connection complete all as specified & directed including taking down old one.make Make L & T Cat No SS90910 or equivalent approved make as approved by GE.

Supply only Amp meter for complete in all respect all as specified and directed. Make:-L&T ,CG & alstom or equivalent approved make as approved by GE.

Supply only Volt meter for complete in all respect all as specified and directed. Make:-L&T ,CG & alstom or equivalent approved make as approved by GE.

Supply only phase failure relay/overload relay VSP D1 complete all as specified and directed by Engr-in-Charge. Make : Minilec equivalent approved make as approved by GE.

Supply only Indication lamp for three colour (R, Y, B) complete in all respect all as specified and directed. Make:-L&T ,CG ,Havells or equivalent approved make as approved by GE.

EESSI (BID ID -3401743)

national engineering (BID ID -3411269)

V S BUILDER (BID ID -3403507)