SPECIAL REPAIR TO SINGLE OFFICER ROOMS BLBG NO SP-2 AND CONVERSION OF LT OVER HEAD LINE TO LT UG CABLE AND ALLIED WORKS AT CERTAIN LOCATIN AT BENGDUBI MIL STN UNDER GE BENGDUBI

Amount

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc, disposing off the retrieved debris outsite the premises, complete all as specified and as directed.

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc, disposing off the debris outsite the premises, complete all as specified and as directed.

Taking down shutters any description area exc. 1.5 Sqm but n exc 2 Sqm each, , complete all as specified and as directed.

S&F factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after prepation of the surfaces, complete all as specified and as directed.

S&F factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after prepation of the surfaces, complete all as specified and as directed.

S&F Factory made 30mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

M&L for 2nd class hard wood (Hollock/Kalasiris/Brjsal/Gamari) (kiln seasoned and chemically pressure treated) 30 mm thick glazed and skeleton shutters, open rebated and prepared to rceieve glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a), complete all as specified and as directed.

M&L for preparing back surfaces of chowkats, of any description and girth, not otherwise described, and treated with tar or coal tar black paint, complete all as specified and directed .

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregates) as in hold-fast blocks, blocks for fixing lugs, filling of pressed steel chowkhat and the like including necessary form work, complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces etc, including raking out joints, hacking for key, scrubbing down with water etc, and also including removal of rubbish off the premises, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces brick work or concrete surfaces finsihed even and smooth (without using extra cement) mixed with water proofing compound in top layer of 5mm thick as per manufacturer instructions, complete all as specified and as directed. Note:- WPC shall be measured and paid seperately

Supply only liquid water proofing compound, complete all as specified and directed..

M&L for rendering 15 mm thick in cement mortar (1:6), on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces of ceiling/Chajja/Facia of chajja etc, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer, complete all as specified and directed.

M&L for preparing new plastered surfaces of walls, applying two coats of wall care Putty (minimum thickness of two layers shall be 1.5mm) and thereafter applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white washing, complete all as specified and directed .

M&L for complete removal of existing treatment from the internal surfaces of wall etc, thereafter prepartion the surfaces and applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and as directed.

M&L for washing, rubbing down and stopping of painted surfaces thereafter preparation of plaster or unplaster surfaces ceiling and applying one coat of white wash, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 20mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM 1:4, complete all as specified and and as directed.

M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 20mm thick screed bed in CM 1:6, complete all as specified and as directed.

Taking down 15mm bore steel tubing & connections, complete all as specified and as directed.

All as per item No 24 above but 20 mm bore

Supplying and laying of 20mm (Outer Diameter) of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings,on the walls & ceiling or laid in floors, complete all as specified and as directed.

Supplying and laying of 25mm (Outer Diameter) of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings,on the walls & ceiling or laid in floors, complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints laid in floors/ trenches etc, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends (any radius), complete all as specified and directed.

S&F in repairs bib tap, fancy type, long swan neck, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed.

S&F in repair angle stop cock, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and as directed.

S&F in repair vitreous china wash basin, 1st quality, white, flat back, approx size 510x410mm excluding taps but including 32 mm bore brass chromium plated waste fittings, 32mm bore PVC waste pipe, MS brackets, complete all as specified and as directed.

S&F in repairs Vitreous China Wash Down Water closet (Pedestal Pattern) 1st quality, , white (excluding flushing cistern & flush pipe) including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel CP or aluminised huiging device, making connections, complete all as specified and as directed.

S&F in repairs PVC valveless, double syphonic action type, flushing cistern, low level of 10 Litres capacity, white, with and including inlet, ball valve, float, 32mm dia flush pipe of polyethylane of low or high density or PVC, flushing bend & handles, also including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet & making connections, complete all as specified and as directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm, complete all as specified and directed.

S&F in repairs tubular towel rail, 20mm dia, D type, brass chrormium plated, 600mm long between flanges, complete all as specified and as directed.

S&F for powder coated standard aluminium section as in frame, shutters for doors, windows / ventilators, Fixed/ Openable / side hung/ sliding two or three track or in any pattern, partitions, kitchen cabinet/almirah etc, cut to size, jointed with cadmium plated steel screws, including Aluminium beading & rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete all as specified and directed. Notes:- (i) Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. (ii) The accessories (including Aluminium mongries etc) required to be provided for windows, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered for payment. (iii) Cost of all the items, accessories & Aluminium mongries required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes, wire cloth shall be measured and paid separately under respective items.

S&F anodised aluminium grill (anodised transparent or dyed to required shade ccording to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S&F in repair Door closer (Aluminmium dia cast body), hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg, complete all as specified and as directed.

S&F 5.5mm thick sheet glass of ordinary quality frosted one side and and glazing for Aluminium Joinery, in squares exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F 3mm thick sheet glass of ordinary quality and glazing for steel surrounds with & including oil putty, in squares n exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and shown on drawing for SI No. 08095 on Srl Page No. 180 of SSR (Part-II) and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,, complete all as specified and shown on drawing for SI No. 08080on Srl Page No. 176 of SSR (Part-II) and as directed.

S&F in repairs brass chromium plated shower roses, 125 mm size with or without swivel joints (including Shower Arms) to 15mm bore steel pipe or union, complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap 75mm (diameter of outlet), plain with grating including jointing with solvent cement, complete all as specified and as directed.

S & F in repair brass CP mixer for mixing hot & cold water, screwed down for 15mm bore iron pipe, complete all as specified and as directed

S & F soap dish CP, fixed to wall with and including plugs & chromium plated screws, complete all as specified and as directed.

S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.

S & F toilet paper holder with flat recessed type stainless steel, complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) as in benching, cover fillets, roof kerbs, kerbs PCC padding over roof and of any description & in any position not otherwise specifically provided-for, including taking down existing un-servicable waterproofing treatment from roof slab surfaces, roughening of old concrete surfaces by picking, cleaning the surfaces by wire brush and also including disposing off the retrieved debris outside the premises / site, complete all as specified and as directed by Engineer-in-Charge.

M&L for 40mm thick cement concrete type B1 (1:2:4) (Using 20 mm crushed stone aggregates) admixed with admixture Conplast WL Xtra (of Make FOSROC or equvilant brand of other manufracturer) at the rate of 125ml/ 50 kg Bag of Cement and Vergin ploypropylene Fibre (Recron) (of Make RELIANCE or equvilant brand of other manufracturer) at the rate of 125gm per 50 kg Bag of Cement, as in padding over roof etc, finsihed even and smooth without using extra cement, complete, all as specified and directed by Engineer-in-Charge under the guidence of authorised applicator of the manufracturer.

M&L for waterproofing coating with polyurethane based water proofing liquid membrane to be applied by brush with three coats miniumum dry film of total thickness 1mm thick and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterprrofing memebrane, complete all as specified and and as directed by Engineer-in-Charge. Note: Item No. 55 shall be excuted through authorised applicator of the manufacturer as approved by GE.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in cupboard shutters, shelves, partition, etc, including provision of 2nd Class Hardwood(Teak wood) lipping, 6 mm thick fixed with nails, complete all as specified and directed.

S&F 100mm size butt hinges, heavy weight, cold rolled, mild steel, complete all as specified and as directed

S&F Aluminium anodised barrel tower bolt, 150 mm long of extruded section, complete all as specified and as directed.

S&F 150 mm size aluminium handle, cast type, anodised, complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type double-layered) with closed top including, dismentaling unsv water tank outlet and washout holes, provision of GI fitting for fixing of the inlet, outlet, washout pipes, hoisted in position, complete all as specified and directed by Engineer-in-Charge

S&F gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 20 mm bore, complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe of 20mm bore (Minimum weight 455 grms), complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed .

M&L for Preparation of steel and iron surfaces of any description duly applied with shop coat of primer, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint, complete all as specified and as directed. Note : Cost of application of shop coat of primer not included in this item.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S&F mild steel rolled sections [Fe 410-W (Gde E-250) quality - B] as in roof trusses (framed), trussed, main and cross beams, hip and jack rafters, purlins, Gusset plate and base plates, where connected to common rafters and running rails, distance pieces, cleats, guides for sliding doors; fixed with angle cleats or other connecting plates, framing for cladding, staging for water tanks, nuts, bolts, washers etc,includng welding or riveting etc including dismantling of old ones, complete all as specified and as directed.

S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering/ cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), including dismantling of old ones, complete all as specified and directed.

M&L for making good with cement mortar 1:6, under cills or over arches, lintels and bressummers, including all pinning when necessary, complete all as specified and directed.

M&L for Brickwork with fly ash Bricks, old size of class designation 75 (i.e of average compressive strength 75 Kgf/Cm2) straight or curved on plan exc 6m mean radius, built in Cement morter 1:6 and including of demolition of old ones, complete all as specified and directed

M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of 3:1 and including demolition, complete all as specified and directed.

M&L for reinforced cement concrete (1:1/2:3) type A-1 (using 20 mm graded crushed stone aggrgates) as in chajjas and including demolition, complete all as specified and as directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similer items including edges for rough finished flat surface of concrete, complete all as specified and as directed.

M&L for TMT bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed.

S&F stainless steel decorative curtain rod of 25 mm bore with wood finishes, complete all as specified and as directed.

S&F brackets and fancy type funnel caps suitable for the curtain rod to be provided under item No 74 above, complete all as specified and as directed.

Mirror polishing on existing marble/ granite/Kota stone/ stone work where ever required to give high gloss finish, complete all as specified and directed.

Taking down carefully existing aluminium point wiring (light / fan / socket or power point) complete, with all fittings such as switch socket combination, switches, sockets, regulator, ceiling rose, utility light fittings and lamp holders etc and making good the disturbed surfaces of walls, roof and floor etc to match with the existing specification, complete all as specified and as directed.

Material and labour for point wiring for one light point/one fan point/ one exhaust fan point/ controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable 1100 Volts grade drawn in and including PVC casing-caping (minimum 25mm width) fixed on the surfaces of wall, ceiling etc with & including all accessories, fittings, PVC junction Boxes etc, also including 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, connected to earth dolly and to be terminated in and including making good the surfaces in CM 1:3 to match with the adjoining surfaces, complete all as specified and as directed.

All as per Item No 79 above but for one switch socket outlet, 5 Amp on same board all as specified and as directed.

All as per Item No 79 above but for one switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per item No 79 here-in-before but for one 5/15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, complete all as specified and as directed.

All as per item No 79 here-in-before but for one 15 Amp switch socket outlet, independent with 4.00 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 4.00 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, complete all as specified and as directed.

S&F Modular switch 1 way 6A, 1 module, complete all as specified and directed.

S&F switch 1 way 16A, 1 module, complete all as specified and directed.

S&F Modular socket 6A , 2/3 pin combined, 2 module, complete all as specified and directed.

S&F Modular socket 6A/16A , 2/3 pin combined, 2 module, complete all as specified and directed.

S&F Modular Fan step regulator, 120W, 2 module, complete all as specified and directed.

S&F ceiling rose, 3 terminal /PVC/Polycarbonate, isolated body, complete all as specified and as directed.

S&F Modular Bell push, 6A, 1 module, complete all as specified and directed.

S&F Bell, AC, 230volts, single pole, complete all as specified and as directed.

S&F Modular blank plate, 1 module, complete all as specified and directed.

S&F Modular type white cover plate with 2 module, complete all as specified and directed.

S&F Modular type white cover plate with 3 module, complete all as specified and directed.

S&F Modular type white cover plate with 6 module, complete all as specified and directed.

S&F Modular type white cover plate with 8 module, complete all as specified and directed.

S&F Modular metal flush box, 1/2 module, complete all as specified and directed.

S&F Modular metal flush box, 3 module, complete all as specified and directed.

S&F Modular metal flush box, 6module, complete all as specified and directed.

S&F Modular metal flush box, 8module, complete all as specified and directed.

S&F in repair sheet metal enclosure for MCBs DBs, TPN, 4 way, Double Door with magnetic locking system, Powder coated including necessary provision for inserting the DBs in wall by cutting the bricks/stone masonary etc and making good of disturbed surfaces to match with existing colour of wall, complete all as specified and as directed.

S&F in repair sheet metal enclosure for MCBs DBs, SPN, 12 way with 200Amps rated bus bar 240 volts, Double Door with magnetic locking system, Powder coated including necessary provision for inserting the DBs in wall by cutting the bricks/stone masonary etc and making good of disturbed surfaces to match with existing colour of wall, complete all as specified and as directed.

S & F MCB, 'C' curve, TPN, 240 volts breaking capacity 10KA, 40 to 100 Amps, breaking capacity 10KA, complete all as specified and directed.

S & F MCB, 'C' curve, SPN, 240 volts breaking capacity 10KA, 40Amps, complete all as specified and directed.

S & F MCB, 'C' curve, SP, 240 volts breaking capacity 10KA, 5 to 32Amps, complete all as specified and directed.

S & F Decorative wall lingh fixture, brushed nickel finish, suitable for 9 W LED lamp (B22) including 9/10 W LED Bulb etc, complete with all accessories internally pre-wired and including connecting up with twin core twisted fiexible copper conductor cable suitable size, complete all as specified and directed.

Supply and fixing LED tube lingh batten one type made of CRCA sheet with decaorative end caps suitable with ultra bright glass LED tube light 1 x 18/20 watt T8 type single side connection complete with both end bi pin holder and all accessories internally prewired and fixed to wall/celing incl fittings accessories and connecting up with twin core flexible copper conductor cabel suitabe size, complete all as specified and directed.

S & F in repair energy saving new generator enviromental friendly long life versatile presure die cast aluminium IP 66 for securty ligh fitting luninaire with high power LEDs as ligh source (100 Im/watt) with LDR sensor for automatic ON/OFF operation and electronic driver of capacity 25 watts with pre-wared and necessary mounting arrangements and provison of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade braket 1.5 mtr long bend to requred shape with clamps, nut botls including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer , complete all as directed by Engineer-in-charge.

S&F energy saving BLDC ceiling fan; 5 star rating, Type of motor - Brush Less DC Motor (BLDC) and Input Power - 32 to 35 Watts with full speed and reduced power consumption with reduced speed technology, Voltage- 90-300V AC, 50Hz, single phase, RPM - 340 to 375 rpm, Blades- Decorated, Sweep - 1200 mm, Air delivery - Not less than 210 CMM with service value 6.00 BEE and Colour - Glow white/ Toast Brown/ Gloss Black or others as approved by GE, complete all as specified and as directed. .

S &F for energy efficient exhaut fan of 250 mm sweep made of metal body Ventil Air-DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long,12mm dia embedded in the wall including provision of PVC fiexible copper cable of size 23/0.0076 two core from ceiling rose to exhaut fan for connection and maing suitable size of hole to existing brick wall for fan base complete all as specified and directed.

S &F for wall mounted LED tube light fitting 10 watts batten, anodized extruded aluminium housing, high transmisivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories interially pre-wired and necessay mounting arrangements, provision of new 3 core multistranded copper counductor of size 23/0.193 form ceiling rose to fiting complete all as specified as directed.

Supply and fix electric water heater storeage type steel body with stainless steel glass lined coated and heating elcment upto 2 KW capacity 25 Ltr BEE 5 Star rated complete with all accessories such as safety value, thermostate NRV, Connection piece etc.complete all as specified as directed.

S&F 2 module socket with shutter 25Amps, 240 volts including Modular Metal Flush box and cover plate, complete all as specified and directed.

S&F 2 module starter switch 25Amps, 240 volts including Modular Metal Flush box and cover plate, complete all as specified and directed.

Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLHS cable of size 6.0 sqmm and one single core PVC insulated (unsheathed) multi stranded copper conductor FRLHS cable of size 6.0sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25 mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces and including taking down old one, complete all as specified and as directed. Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as "1RM".

M&L for Earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, PCC (1:3:6) type C-1 with 50 mm thick Pre-cast RCC (1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 15 mm bore (light grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 m and necessary testing on completion, including dismantling old unsv ones complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation,laying of cable, pipe etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers not exc 25cm thick in layers, complete all as specified and directed.

Removal of surplus spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.

Dismantling of ACSR or AAC conductor , complete all as specifed and directed.

Dismantling of cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, complete all as specified and directed.

Dismantling of insulators of any grade, description and size from the poles etc, complete all as specified and directed.

Dismantling of GI earth wire or copper conductor, service feeder or distribution span, complete all as specified and directed.

Supplying, laying, jointing and testing XLPE insulated, screened, PVC bedded, galvanized steel strip, heavy duty, wire armoured electric LT power cable with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm x 2 core in trenches /along poles/on wall etc, complete all as specified and as directed Notes : - (i) Excavation and earth work, sand cushioning, protection covers shall be measured and paid for separately. (ii) Unless otherwise directed by the GE, the cable shall be procured by the contractor in single length (as manufactured) to meet the actual length of cable as required at site. However, for payment purpose, the length actually ordered & laid shall be measured and paid for.

All as per item No 124.00 here-in-before but LT Cable of size 10Sqmm x 4 Core.

All as per item No 124.00 here-in-before but LT Cable of size 16 Sqmm x4 Core.

All as per item No 124.00 here-in-before but LT Cable of size 35 Sqmm x 3.5 Core.

All as per item No 124.00 here-in-before but LT Cable of size 50 Sqmm x 3.5 Core.

All as per item No 124.00 here-in-before but LT Cable of size 70 Sqmm x 3.5 Core.

All as per item No 124.00 here-in-before but LT Cable of size 120 Sqmm x 3.5 Core.

All as per item No 124.00 here-in-before but LT Cable of size 150 Sqmm x 3.5 Core.

Material and labour for well burnt Sub-class 'B' old size bricks, best quality locally available laid flat, dry in trenches for cable protection, complete all as specified and as directed.

M& L for Sand cushioning in trenches for cushioning of underground cable including spreading, levelling, well ramming in layers , complete all as specified and directed. Note: Punned thickness 18cm shall be considered for payment as per para 19.75 of SSR Part-I)

Supply and fixing GI tubing, light grade, 50mm bore for protection of cable under road crossing, across drain, along electric pole or floor /wall etc, complete all as specified and directed. Note for Item No. 134 to 136: Excavation & Earthwork/Boring/ Drilling shall be measured & paid for separately. However the cost for provision of clamps made from mild steel flat of required size, bolts, nuts, washers etc (including painting of mild steel surfaces with 2 coats of aluminium paint over 1 coat of red oxide primer) for fixing of G.I. pipes with poles etc shall be deemed to be included in the quoted rate of above item.

All as per item No 134 above but 40 mm bore tubing.

All as per item No 134 above but 15 mm bore tubing.

M & L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of preparation of exposed surfaces, application of one coat of red oxide primer and thereafter 2 coats of alluminiuam paint, complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to GI strip 25mmx4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, PCC (1:3:6) type C-1 with 50 mm thick Pre-cast RCC (1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 40 mm bore (light grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 m and necessary testing on completion, complete all as specified and as directed.

Boring/Drilling (horizontally) using necessary machine and manually for passing 40mm to 80mm bore pipe for protection of the cable at 1 metre depth in soil below existing road, pavement, hard standing etc without damaging the existing surfaces, getting out & disposal of soil to a distance not exceeding 50 metre from the site of work, complete all as specified and directed. Note : Cost for provision of pipes & cable not included in the scope of above item.

S&F street light bracket made out of 40 mm bore GI medium grade pipe 1.2 M length bent to the shape and reduced to size at top upto 1.5m length as required for steet light fittings pronded with two pairs of MS Flat Iron 40mm x 6mm and clamps of required suitable length and shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete, complete all as specified and directed.

Supply, providing and testing PVC Insulated, weather proof, FRLSH, PVC sheathed cables with multistranded bright annealed copper conductor of size 1.5 Sqmm 3 core for connection of light fittings to Steel pole light junction box, cable laid through steel pole & including driling work for making hole wire entry in steel pole, complete all as specified and directed.

S&F in repair and testing of factory made thermoplastic weather proof, junction box of size 205(L) x 255 (B) x 112 (D) mm with IP-65 protection having 01 Number DIN Rail for mounting of MC, also provided with 01 Number MCB, SP, 6 Amps, 10 KA breaking capacity, "C" curve & two openings with & including cable glands for termination of cable & fixing with the provision of suitable sized MS clamps two sets with nuts bolts and washers to poles, complete all as specified and as directed

Supply, installation, testing and commissioning 3 phase and neutral, 415 volts outdoor type, double door, LT panel board size 1200 mm height X 1200 mm width X 500 mm depth (over all dimension) confirming to IS 8623, CPRI approved, factory fabricated & factory assembled , waterproof,dust and vermin proof cubical type with locking arrangement , LT Panel made out of suitable size angle iron, channel and fabricated from 3.00 mm thick CRCA sheet with anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), independently housing for each control switch gear and indicating lamps with & including busbars made of pure copper duly insulated with heat retardent fire proof (HRFR) heat shrinkable sleeves of relevant colours.Bus bar shell be properly supported/mounted on epoxy insulators.All live parts and joints shall be insulated with (HRFR) shrouds, conforming to IS, including provn for cable gland and lugs for incoming and out going cable and connecting suitable earth strips .Suitable openable doors shall be provided of all operational switchgear and MCCBs and detchable cover shall be provided on all other accessories. Grouting the panel board in ground with & including suitable size foundation & plinth of PCC 1:3:6 (type C-1 using 20 mm grade crushed stone aggregate) complete.Panel shall be manufactured suitable for housing and including the following duly control wiring with multistranded copper condutor FRLS with colour coding incl connection with copper lugs complete for 3 phase 50 Hz electric supply. Incoming:-(a) Copper strip busbar of current carrying capacity 300 Amps wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos. (b) MCCB 250 Amp, 4 Pole, 415 Volts, 36 KA rating with thermal magnetic trip unit, overload, short circuit fault protection 3 phase, Ics = 100% of Icu and shall have roto operative double break mechanism along total break time less than equal to 10 ms with Spreader terminal of both end side - 01 No. Make: Schneider Cat no - LV525343 / Legrand Cat No: 420249 / Siemens, Cat: 3VA1225-4GE42-0AA0/ ABB, Cat No: 1SDA068111R1.

Supply, fabrication, installation and testing of LT factory made (CPRI approved) water and vermin proof protection pedestal type feeder pillar box of minimum size 1200mm x 600mm x 500mm (overalls), outdoor type, double door made out of 3.15 mm thick CRCA sheet with frame and legs of mild steel angle iron of size 40 x 40 x 6 mm in all side with double door, front and back side openable and air ventilation arrangement including provision of cable looping box of size 600 x 450 x 400mm made out of 3 mm thick CRCA sheet with front side openable double door shutter hinged door with door bolt 300mm long locking arrangement at both side complete painted with Powder Coated paint of approved shade and suitable for 3 phase 4 wire system 500 voltage grade complete wiring and all incoming connections with copper strip busbar of required size to MCCB input, including PCC (1:3:6) (type C-1 using 20 mm grade crushed stone aggregate) complete as in foundation of size 0.80m x 0.60m x 0.90m depth (30 cm below ground level & 60 cm above ground level) including necessary excavation and earth work complete all as specified and as directed alongwith comprising of the following accessories. Incoming (a) Aluminium strip busbar of current carrying capacity 300 Amps wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos. (b) Copper strip busbar of current carrying capacity 200 Amps wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos. (c) MCCB 63 Amp, 4 Pole, 415 Volts, 25 KA rating with thermal magnetic trip unit, overload, short circuit fault protection 3 phase, Ics = 100% of Icu and shall have roto operative double break mechanism along total break time less than equal to 10 ms with Spreader terminal of both end side - 01 Nos. Make: Schneider Cat no - LV510315 / Legrand Cat No: 420053/ Siemens, Cat: 3VA1163-3GE42-0AA0/ ABB, Cat No: 1SDA067404R1.

S&F double wall corrugated (DWC) pipes of size 63 mm outer dia conforming to IS 16205 (Part-24) including all accessories( joints, Sockets, Elbows, bends and End caps etc), all complete as specified and as directed.

Supply ,fabrication, installation and testing of LT out door type factory made CPRI Approved , junction box of size 900mmX600mmX400mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 40X40X5mm vertical frame and legs with mild steel flat iron 25X5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of size 0.80m X 0.6m X 0.90m depth (0.30m below ground level and 0.60m above ground level ) and connections of all outgoing / incomming existing cable of any size drawing / digging out cable from loops in trenches inclusive of necessary excavation and earthwork as required and relaying the cables including the following fitment accessories all complete as specified and as directed. (a) Alluminium bus bar of size 50 mm X 6 mm X 400mm long wrapped with PVC sleeves with maintained the colour code and provision of making holes as required with nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos. (b) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.

NEO BUILDERS (BID ID -3119073)

M/S TARAN INFRACON (BID ID -3126011)

S K ENTERPRISE (BID ID -3118850)

M/S JANATA CONSTRUCTION (BID ID -3122624)

M/S R. K. INDUSTRIES (BID ID -3119817)

M/S G D CONSTRUCTION (BID ID -3127070)

M/S SEN CONSTRUCTION (BID ID -3120560)