8424 PROVN OF KOTA STONE FLOORING FOR INLIVING SAILORS ACCOMMODATION A84 85 AT INS ANGRE UNDER GE NW KUNJALI AND ADDITION ALTERATION TO MAIN GATE WITH COVERED ROOF SHEETS AT BASE VICTUALLING YARD COLABA MUMBAI

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M &L for machine cut kota stone slab flooring 18 to 20 mm thick as in floors,steps, landings etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl making 02 Nos grooves in steps over & incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed.

M&L Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed.

Excavation in post holes any type of soil (or similar holes) each n.exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and rimoving surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified and directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:3:6, type C2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as foundation , filling and mass concrete complete all as specified and directed.

M&L for RCC 1:1½:3, type A-1 ( using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete

M&L for RCC 1:1½:3, type A-1 ( using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts concrete complete all as specified and directed.

M&L for Form work rough finished to sides of concrete foundations, footings, bases of columns , raft and raft beams, sides and soffits ( if any) of foundation and plinth beams; and similar work; vertical or to batter concrete complete all as specified and directed.

M&L for Form work rough finished to sides of pillars, posts, columns concrete complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diaM&L for

All as per srl item No. 20 here in before but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Note:- Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified.

M&L hardcore of broken stones or boulders of gauge n.exc 63mm deposited,spread & levelled in layers 10cm thick, watered & rammed to a true surfaces complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 mix, type B-0, in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones, bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed,

M&L peparation of newly plastered surfaces of walls and applying two coats of weather proof acrylic based paint (100 % acrylic) over a coat of 1 to 2 mm thick wall care putty all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

M&L for rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates conforming to grade Fe 290 (Gde-E-165) incl one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws as specified.

S&F framed work as in doors or gates of angle or other section with gusset plates , rails , braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covjering running rails and duides) and hanging also fastening and fixing complete incl a shop coat of zinc chromate primer pjaint incl preparation of surfaces

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

RAJU ENTERPRISES

Laxmi Sales

Nilesh Construction

David Construction Co.

MADHU ENTERPRIZES

M/s Mohd Altaf Hanif Qureshi

sri construction

Vandan Enterprises

Anil Industrial Corporation