Special repair work at JNV Raygada (Odisha)

NAME OF WORK :- SPECIAL REPAIR & MAINTENANCE WORK AT JNV RAYAGADA,

SUMMARY OF COST

Sl. Description Scheduled Non Schedule

No. Amount Amount

(In Lacs.) (In Lacs.)

A BUILDING WORK

1 Repairment of School Buildings 3786520.29

2 Repairment of Kitchen & Dinning 1843911.90 93196.90

3 Repairment of Girls Dorm. (G+2) 3519778.03 133008.83

4 Repairment of Boys Dorm. 263494.00 28603.20

5 Repairment of Type IV Quarter 115233.10

6 Construcvtion of Surface Drain (450mm x 600mm 1529302.81

GRAND TOTAL: 11313049.05

GRAND TOTAL: 11313049.05

Digitally signed by JAYA

NAME OF WORK :- SPECIAL REPAIR & MAINTENANCE WORK AT JNV RAYAGADA, ODISHA.

BILL OF QUANTITY FOR SCHOOL BUILDING

Sl. DSR- Description Qty Unit Scheduled Rate Non-Scheduled Scheduled Non- Schedule

No. 2023 (In Rs.) Rate Amount Amount (In Rs.)

(I) STRUCTURE REPAIR & RETROFITTINGS

Expansion Joint Treatment

1 5.45 Providing and fixing of expansion joint system related with wall joint

(internal/ external) location as per drawings and direction of Engineer-In-

Charge. The joints shall be of extruded aluminum base members, self

aligning / centering arrangement and support plates as per ASTM B221- 02.

The material shall be such that it provides an Expansion Joints System

suitable for vertical wall to wall/ wall to corner application, both new and

existing construction in office Buildings & complexes with no slipping down

tendency amongst the components of the Joint System. The Joint System

shall utilize light weight aluminum profiles exhibiting minimal exposed

aluminum surfaces mechanically snap locking the multicellular to facilitate

movement. (Material shall confirm to ASTM 6063).

2 5.46 Providing and fixing of expansion joint system of approved make and

manufacture for various roof locations as per approved drawings and

direction of Engineer-In-Charge. The joints shall be of extruded aluminum

base members with, self aligning and self centering arragement support

plates as per ASTM B221-02. The system shall be such that it provides

water tight roof to roof /roof to corner joint cover expansion control system

that is capable of accommodating multidirectional seismic movement

without stress to its components. System shall consist of metal profile that

incorporates a universal aluminum base member designed to accommodate

various project conditions and roof treatments. The cover plate shall be

designed of width and thickness required to satisfy movement and loading

requirements and secured to base members by utilizing manufacturer’s pre-

engineered self-centering arrangement that freely rotates / moves in all

directions. The Self centering arrangement shall exhibit circular sphere ends

that lock and slide inside the corresponding aluminum extrusion cavity to

allow freedom of movement and flexure in all directions including vertical

displacement. The Joint System shall resists damage or deterioration from

the impact of falling ice, exposure to UV, airborne contaminants and

occasional foot traffic from maintenance personnel. Provision of Moisture

Barrier Membrane in the Joint System to have water tight joint is mandatory

requirement. (Material shall confirm to ASTM 6063.)

TOTAL AMOUNT (STRUCTURE REPAIR & RETROFITTINGS): 3,05,556.58 -

TOTAL AMOUNT (STRUCTURE REPAIR & RETROFITTINGS): 3,05,556.58 -

(II) REPAIRS TO ROOF

3 14.91.1 Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black finished

reinforced with non-woven polyester matt consisting of a coat of bitumen

primer for bitumen membrane @ 0.40 litre/sqm by the same membrane

manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps.

Over the primer coat the layer of membrane shall be laid using Butane

Torch and sealing all joints etc, and preparing the surface complete.

The vital physical and chemical parameters of the membrane shall be as

under : Joint strength in longitudinal and transverse direction at 23°C as

650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as

300/250N. Softening point of membrane not less than 150°C. Cold flexibility

shall be upto 2°C when tested in accordance with ASTM, D - 5147. The

laying of membrane shall be got done through the authorised applicator of

the manufacturer of membrane :

4 14.92 Extra for covering top of membrane with Geotextile, 120 gsm non woven,

100% polyester of thickness 1 to 1.25 mm bonded to the membrane with

intermittent touch by heating the membrane by Butane Torch as per

manufactures recommendation. 2996.79 Sqm 86.50 2,59,221.44

5 22.14.1 Grading roof for water proofing treatment with

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) 202.69 Cum 7825.16 15,86,081.25

TOTAL AMOUNT (REPAIRS TO ROOF): 34,80,963.71 -

TOTAL AMOUNT (REPAIRS TO ROOF): 34,80,963.71 -

Grand Total Amount 37,86,520.29

Grand Total Amount 37,86,520.29

Digitally signed by JAYA

NAME OF WORK :- SPECIAL REPAIR & MAINTENANCE WORK AT JNV RAYAGADA, ODISHA.

BILL OF QUANTITY FOR KITCHEN & DINING

Sl. DSR- Description Qty Unit Scheduled Rate Non-Scheduled Scheduled Non- Schedule

No. 2023 (In Rs.) Rate Amount Amount (In Rs.)

(i) Structural Repair & Retrofitting

1 26.28 Chipping of unsound/weak concrete material from slabs, beams,

columns etc. with manual Chisel and/ or by standard power driven

percussion type or of approved make including tapering of all edges,

making square shoulders of cavities including cleaning the exposed

concrete surface and reinforcement with wire brushes etc. and disposal

of debris for all lead and lifts all complete as per direction of Engineer-

A 26.28.2 50mm average thickness 9.00 Sqm 249.43 2,244.86

B 26.28.3 25 mm average thickness 4.50 Sqm 123.33 554.97

2 26.29 Cleaning of reinforcement from rust from the reinforcing bars to give it

a total rust free steel surface by using alkaline chemical rust remover of

approved make with paint brush and removing loose particles after 24

hours of its application with wire brush and thoroughly washing with

water and allowing it to dry, all complete as per direction of Engineer-In-

26.29.1 Bars upto 12 mm diameter 216.00 Mtr 8.03 1,733.89

3 26.37 Cleaning of exposed concrete surface of sticking material including

loose and foreign material by sand blasting with coarse sand followed

by and including cleaning with oil free air blast as per direction of

Engineer in charge. 46.89 Sqm 372.08 17,446.61

4 26.38 Shotcreting R.C.C. columns, beams and slabs etc. in layers with

approved design mix concrete having the specified minimum

characteristic compressive strength [with ordinary portland cement,

coarse sand and graded stone aggregate of 10 mm maximum size in

proportion as per design criteria] including the cost of centering and

shuttering at edges and corners etc. as directed by Engineerin- Charge

Note: Rates shall include the providing necessary ground wires etc.

The levelling gauges, if used, shall be paid for separately. Payment

under this item shall be made only after proper wet curing has been

done and surface has been satisfactorily evaluated by sounding/

tapping with a blunt metal instrument.

A 26.38.1 25mm thick in Grade M 25 with cement content not less than 330 kg

B 26.38.2 50mm thick in Grade M 25 with cement content not less than 330 kg

Expansion Joint Treatment

5 5.45 Providing and fixing of expansion joint system related with wall joint

(internal/ external) location as per drawings and direction of Engineer-In-

Charge. The joints shall be of extruded aluminum base members, self

aligning / centering arrangement and support plates as per ASTM B221-

02. The material shall be such that it provides an Expansion Joints

System suitable for vertical wall to wall/ wall to corner application, both

new and existing construction in office Buildings & complexes with no

slipping down tendency amongst the components of the Joint System.

The Joint System shall utilize light weight aluminum profiles exhibiting

minimal exposed aluminum surfaces mechanically snap locking the

multicellular to facilitate movement. (Material shall confirm to ASTM

6 5.46 Providing and fixing of expansion joint system of approved make and

manufacture for various roof locations as per approved drawings and

direction of Engineer-In-Charge. The joints shall be of extruded

aluminum base members with, self aligning and self centering

arragement support plates as per ASTM B221-02. The system shall be

such that it provides water tight roof to roof /roof to corner joint cover

expansion control system that is capable of accommodating

multidirectional seismic movement without stress to its components.

System shall consist of metal profile that incorporates a universal

aluminum base member designed to accommodate various project

conditions and roof treatments. The cover plate shall be designed of

width and thickness required to satisfy movement and loading

requirements and secured to base members by utilizing manufacturer’s

pre-engineered self-centering arrangement that freely rotates / moves

in all directions. The Self centering arrangement shall exhibit circular

sphere ends that lock and slide inside the corresponding aluminum

extrusion cavity to allow freedom of movement and flexure in all

directions including vertical displacement. The Joint System shall

resists damage or deterioration from the impact of falling ice, exposure

to UV, airborne contaminants and occasional foot traffic from

maintenance personnel. Provision of Moisture Barrier Membrane in the

Joint System to have water tight joint is mandatory requirement.

(Material shall confirm to ASTM 6063.)

SUB TOTAL 3,65,215.78 -

say in lacs 3.65 -

(ii) Repairs to Roof

Digitally signed by JAYA

Sl. DSR- Description Qty Unit Scheduled Rate Non-Scheduled Scheduled Non- Schedule

No. 2023 (In Rs.) Rate Amount Amount (In Rs.)

7 14.91.1 Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black

finished reinforced with non-woven polyester matt consisting of a coat

of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same

membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and

viscocity 70-160 cps. Over the primer coat the layer of membrane shall

be laid using Butane Torch and sealing all joints etc, and preparing the

surface complete.

The vital physical and chemical parameters of the membrane shall be

as under : Joint strength in longitudinal and transverse direction at

23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse

direction as 300/250N. Softening point of membrane not less than

150°C. Cold flexibility shall be upto 2°C when tested in accordance with

ASTM, D - 5147. The laying of membrane shall be got done through

the authorised applicator of the manufacturer of membrane :

8 14.92 Extra for covering top of membrane with Geotextile, 120 gsm non

woven, 100% polyester of thickness 1 to 1.25 mm bonded to the

membrane with intermittent touch by heating the membrane by Butane

Torch as per manufactures recommendation. 663.42 Sqm 86.50 57,385.63

9 22.14.1 Grading roof for water proofing treatment with

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) 49.72 Cum 7825.16 3,89,066.85

10 Analysis Repairs to plaster of thickness 12 mm to 20 mm in patches with epoxy

based dampgaurd (Dr. Fixit Make) , including cutting the area of

plaster in proper shape, raking out joints and preparing and plastering

the surface of the walls complete, including disposal of rubbish to the

dumping ground, all complete as per direction of Engineer-in-

Charge.With cement mortar 1:4 (1cement: 4 coarse sand)

SUB TOTAL 8,41,793.64 -

say in lacs 8.42 -

(iii) Repair to Toilets

11 15.2 Demolishing cement concrete manually/ by mechanical means

including disposal of material within 50 metres lead as per direction of

Engineer - in - charge.

A 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 0.38 Cum 2368.53 900.04

12 15.23 Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm 41.16 Sqm 71.42 2,939.57

13 Analysis Providing and fixing Ist quality Glazed vitrified tiles polished finish of

size 600 x 600 mm tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved

by Engineer-in-Charge, in skirting, risers of steps and dados, over 12

mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

14 11.41A.3.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to

be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved brand & manufacturer,

in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments

etc. The tiles must be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the

tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of

Tile 600 x 600 mm

1 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps

including stacking the material within 50 metres lead :

2 15.44 Dismantling G.I. pipes (external work) including excavation and refilling -

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore 39.00 Mtr 145.76 5,684.46

3 15.45 Dismantling C.I. pipes including excavation and refilling trenches after -

taking out the pipes, manually/ by mechanical means breaking lead

caulked joints, melting of lead and making into blocks including

stacking of pipes & lead at site within 50 metre lead as per direction of

Engineer-in-charge:

4 15.48 Taking out C.I. cover with frame from R.C.C. top slab of manholes of 1,357.14

various sizes including demolishing of R.C.C. work manually/ by

mechanical means and stacking of useful materials near the site and

disposal of unserviceable materials within 50 metres lead as per

direction of Engineer-in-charge. 2.00 Each 678.57

Digitally signed by JAYA

Sl. DSR- Description Qty Unit Scheduled Rate Non-Scheduled Scheduled Non- Schedule

No. 2023 (In Rs.) Rate Amount Amount (In Rs.)

5 15.51 Dismantling of road gully chamber of various sizes including C.I. grating 1,865.73

with frame including stacking of useful materials near the site and

disposal of unserviceable materials within 50 metres lead including

refilling the excavated gap. 2.00 Each 932.86

6 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled 391.44

materials i/c malba all complete as per directions of Engineer-in-

Charge. 3.00 Each 130.48

7 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) 327.07

including stacking of useful materials near the site and disposal of

unserviceable materials within 50 metres lead. 3.00 Each 109.02

8 15.53 Dismantling of C.I. sluice valve including stacking of useful materials -

within a lead of 50 metres

15.53.1 Up to 150 mm diameter 2.00 Each 310.87 621.75

9 19.24 Dismantling of manhole including R.C.C. top slab, C.I. cover with -

frame, including stacking of useful materials near the site and disposal

of unserviceable materials within 50 m lead as per direction of Engineer-

19.24.1 Rectangular manhole 90x80 cm and 45 cm deep 2.00 Each 2472.25 4,944.49

10 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water -

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

11 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ -

accessories for unplasticised Rigid PVC rain water pipes conforming to

IS : 13592 Type A, including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion.

12.42.1.2 a) Coupler -

12 13.96 Painting (one or more coats) on rain water, soil, waste and vent pipes -

and fittings with synthetic enamel paint of approved brand and

manufacture and required colour on old work :

13.96.1 75 mm diameter pipes 3.00 Mtr 27.44 82.32

13.96.2 100 mm diameter pipes 3.00 Mtr 35.27 105.81

13 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) -

with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device

(handle lever) conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors

wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with 19,754.04

integral type foot rests 3.00 Each 6584.68

14 17.7 Providing & fixing white vitreous china wash basin with C.I. brackets -

painted white, 15mm C.P. brass pillar taps, C.P. brass chain with

rubber plug, 32mm C.P. brass waste of standard pattern including

cutting & making good the walls wherever required.

17.7.4 a) Flat back wash Basin size 550x400 mm with single 15mm C.P. 3,656.92

brass pillar tap. 2.00 Each 1828.46

15 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per -

IS:13983 with C.I. brackets and stainless steel plug 40 mm, including

painting of fittings and brackets, cutting and making good the walls

wherever required :

17.10.2 Kitchen sink without drain board -

16 17.28 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin -

including PVC waste fittings complete.

17.28.2.1 a) 32mm dia (for wash basin) 2.00 Each 116.32 232.64

17.28.2.2 b) 40mm dia (for sink and urinal) 2.00 Each 116.32 232.64

17 MR Providing and fixing CP Brass soap dish 109 mm wide, 125 mm high

and 112 mm distance from wall of standard shape with bracket and all

fittings of the same material of approved quality and colour. 617.00

18 MR Providing & fixing C.P. Brass Waste Coupling for PVC waste Pipe.

Digitally signed by JAYA

Sl. DSR- Description Qty Unit Scheduled Rate Non-Scheduled Scheduled Non- Schedule

No. 2023 (In Rs.) Rate Amount Amount (In Rs.)

19 Providing, fixing, jointing and testing in position of ISI marked UV

stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS :

13592 suitable for rubber ring joints, including all neccessary specials

and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints /

bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/

ceiling/ floor level supported by clamp & hangers etc. in concealed /

inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all

kind of soils, suspended from floor under false ceiling or embedding the

pipes laid under floors / building in 75 mm. alround 1:2:4 cement

concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the

work, breaking and making good the walls and floors etc. after pipes

have been duly laid and tested. The rubber ring shall confirm to

IS:5382.The Pipes will be supported with threaded G I rods & U clamps

with nuts, washers etc on 50x50x5 mm slotted angle. The cost will

include all support arrangements. The work includes commissioning of

all pipes lines as per drawings and specifications and as directed by

engg-in-charge at site.

MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 10.00 Mtr 750.00 7,500.00

MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 5.00 Mtr 550.00 2,750.00

20 Providing & fixing UPVC Floor trap of self cleansing design with

stainless steel grating complete in all respects.

MR Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of

50/75 mm outlet 2.00 Each 673.00

MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser 4.00 Each 831.00 3,324.00

MR P-Trap type Floor Trap 110 x 75 mm 2.00 Each 565.00 1,130.00

21 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I.

grating over floor traps. 8.00 Each 597.00

22 MR Providing & fixing of SS Floor Cleanout, round or square with rubber

seal and flat round cover with screws and other required fitting 1,167.00

complete as required. 3.00 Each 389.00

23 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. 2.00 Each 51.81 103.62

24 17.35 Providing & fixing soil, waste and vent pipes. -

17.35.1.2 a) 100mm dia centrifugally cast iron S & S pipe. 3.00 Mtr 1148.87 3,446.61

17.35.2.2 b) 75mm dia centrifugally cast iron S & S pipe. 3.00 Mtr 1153.98 3,461.93

25 17.37 Providing & fixing M.S. holder bat clamps of approved design to sand -

cast iron/centrifugally cast (Spun) iron S & S pipe embeded in &

including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement

: 2 coarse : 4 graded stone aggregate 20mm nominal size). Including

cost of cutting holes & making good the walls etc.

26 17.38 Providing and fixing bend of required degree with access door, -

insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 1.00 Each 686.16 686.16

17.38.2.2 Sand cast iron S&S as per IS- 3989 1.00 Each 508.49 508.49

27 17.39 Providing and fixing plain cast iron S & S sanitary bend. -

17.39.1.1 Sand cast iron S&S as per IS - 1729 1.00 Each 457.75 457.75

17.39.2.2 Sand cast iron S&S as per IS - 3989 1.00 Each 379.96 379.96

28 17.43 Providing and fixing centrifugaly cast iron single equal plain junction of -

required degree.

29 17.56 Providing and fixing cast iron terminal guard. -

30 17.57 Providing & fixing cast iron coller. -

17.57.1.2 Sand cast iron S&S as per IS - 3989 1.00 Each 499.29 499.29

17.57.2.2 Sand cast iron S&S as per IS - 3989 1.00 Each 352.27 352.27

31 17.58 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) -

iron pipes & fitting of diameters.

32 17.60 Providing & fixing cast iron trap of self cleansing design with or without -

ventarm complete, including cost of cutting & making good the walls &

Digitally signed by JAYA

Sl. DSR- Description Qty Unit Scheduled Rate Non-Scheduled Scheduled Non- Schedule

No. 2023 (In Rs.) Rate Amount Amount (In Rs.)

33 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, -

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of Engineer in

18.8.1 15 mm nominal outer dia Pipes 55.00 Mtr 484.36 26,639.77

18.8.2 20 mm nominal outer dia Pipes 35.00 Mtr 523.08 18,307.97

18.8.3 25 mm nominal outer dia Pipes 25.00 Mtr 610.31 15,257.86

18.8.4 32 mm nominal outer dia Pipes 15.00 Mtr 719.34 10,790.08

34 18.16 Providing and fixing brass stop cock of approved quality. -

18.16.1 15 mm nominal bore 4.00 Each 343.71 1,374.85

35 18.17 Providing and fixing gun metal gate valve with wheel of approved -

18.17.1 a) 25mm dia nominal bore 4.00 Each 605.60 2,422.38

18.17.2 b) 32mm dia nominal bore 4.00 Each 670.98 2,683.92

36 18.18 Providing and fixing ball valve (brass) of approved quality complete. -

(High or low pressure with plastic floats).

18.18.3 a) 25mm. Nominal bore 4.00 Each 451.52 1,806.08

37 18.21 Providing and fixing 30 cm long unplasticised PVC connection pipe with -

18.21.1.1 a) 15mm nominal bore 2.00 Each 82.71 165.41

38 18.21 Providing and fixing 45 cm long unplasticised PVC connection pipe with -

18.21.2.1 a) 15mm nominal bore 2.00 Each 95.11 190.22

39 18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in -

cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with hinged cover fixed in

cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size), i/c necessary excavation,

foundation 3concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone

aggregate 40mm nominal size ) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per standard design :

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class 3,877.60

designation 7.5 2.00 Each 1938.80

40 18.33 Constructing masonry Chamber 60x60x75 cm inside, in brick work in -

cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.

surface box 100mm top diameter, 160 mm bottom diameter and 180

mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size

) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5

fine sand : 10 graded stone aggregate 40 mm nominal size) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm

thick, finished with a floating coat of neat cement complete as per

standard design :

18.33.1 With common burnt clay F.P.S.(non modular) bricks of 10,569.12

class designation 7.5 1.00 Each 10569.12

41 18.49 Providing & fixing CP brass bib cock of approved quality conforming to -

18.49.1 a) 15mm nominal bore 26.00 Each 493.12 12,821.03

42 18.51 Providing & fixing C.P. brass long body bib cock of approved quality -

conforming to IS standards and weighing not less than 690 gms.

18.51.1 a) 15mm nominal bore 6.00 Each 777.38 4,664.27

43 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser -

points of approved quality conforming to IS:8931

18.53.1 15mm nominal bore 5.00 Each 558.79 2,793.97

44 18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of 291.12

approved make and quality as per direction of Engineer-in-charge.

45 18.76 Cutting holes up to 30x30 cm in walls including making good the same: -

18.76.1 With common burnt clay F.P.S. (non modular) bricks 2.00 Each 405.55 811.09

46 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing 1,759.18

drain pipe etc. and repairing the hole after insertion of drain pipe etc.

with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), including finishing complete so as to

make it leak proof. 4.00 Each 439.80

47 18.78 Making chases up to 7.5x7.5 cm in walls including making good and 7,896.87

finishing with matching surface after housing G.I. pipe etc. 40.00 Mtr 197.42

48 19.26 Raising manhole cover and frame slab to required level including -

dismantling existing slab and making good the damage as required

(Raising depth of manhole to be paid separately) :

19.26.1 Rectangular manhole 90x80 cm with rectangular cover 5,109.22

600 x 450 mm of grade LD - 2.5 2.00 Each 2554.61

Digitally signed by JAYA

Sl. DSR- Description Qty Unit Scheduled Rate Non-Scheduled Scheduled Non- Schedule

No. 2023 (In Rs.) Rate Amount Amount (In Rs.)

49 14.75A Cleaning of terrace/loft water storage tank (inside surface area) upto 1,946.00

2000 litre capacity at all heights with coconut brushes, duster etc.,

removal of silt, rubbish from the tank and cleaning the tank with fresh

water disinfecting with bleaching powder @ 0.5gm per litre capacity of

tank including marking the date of cleaning on the side of tank body

with the help of stencil and paint and disposing of malba all complete

as per direction of Engineer-in-Charge. (The old date already written on

tank should be removed with paint remover or black paint and if date is

not written with the stencil or old date is not removed deduction will be

made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock

is damaged that is to be repaired by contractor at his own cost and

nothing extra will be paid on this account)

ELECTRICAL WORK OF KITCHEN & DINING

1 1.8 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FR PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, with piano type switch,

phenolic laminated sheet, suitable size M.S. box and earthing the point

with 1.5 sq.mm. FR PVC insulated copper conductor single core cable

etc as required.

2 1.9 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed medium class

PVC conduit, 2 way piano type switch, phenolic laminated sheet,

suitable size MS box and earthing the point with 1.5 sq.mm. FRLS

PVC insulated copper conductor single core cable etc. as required.

3 1.12 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC

conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor

single core cable for loop earthing as required. 10.00 Mtr 373.00 3,730.00

4 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FR PVC insulated copper conductor, single core cable in

surface/ recessed medium class PVC conduit as required

5 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FR PVC insulated copper conductor single core cable and

1.5 sq.mm. FR PVC insulated copper conductor single core cable as

earth wire in existing surface/ recessed steel conduit including

dismantling as required.

6 1.16 Rewiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable and 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable as earth wire in

existing surface/ recessed steel/PVC conduit including dismantling as

required. 8.00 Point 1,064.00 8,512.00

7 1.17 Supplying and drawing following sizes of FR PVC insulated copper

conductor, single core cable in the existing surface/ recessed steel/

PVC conduit as required.

8 1.21 Supplying and fixing of following sizes of medium class PVC conduit

along with accessories in surface/recess including cutting the wall and

making good the same in case of recessed conduit as required.

9 1.22 Supplying and fixing metal box of following sizes (nominal size) on

surface or in recess with suitable size of phenolic laminated sheet

cover in front including painting etc. as required.

10 1.25 Supplying and fixing stepped type electronic fan regulator on the

existing modular plate switch box including connections but excluding

modular plate etc. as required. 14.00 Each 402.00 5,628.00

11 1.29 Supplying and fixing metal box of 150mm X 75mm X 60mm deep

(nominal size) on surface or in recess with suitable size of phenolic

laminated sheet cover in front including providing and fixing 3 pin 5/6

amps socket outlet and 5/6 amps piano type switch, connection,

painting etc. as required. (For light plugs to be used in non residential

buildings). 8.00 Each 423.00 3,384.00

12 1.30 Supplying and fixing metal box of 180mm X 100mm X 60mm deep

(nominal size) on surface or in recess with suitable size of phenolic

laminated sheet cover in front including providing and fixing 6 pin 5/6 &

15/16 amps socket outlet and 15/16 amps piano type switch,

connection, painting etc. as required. 8.00 Each 558.00 4,464.00

13 1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction

box/ wooden block including connection etc as required. 6.00 Each 104.00 624.00

14 1.34 Supplying and fixing brass batten/ angle holder including connection

etc. as required. 10.00 Each 154.00 1,540.00

Digitally signed by JAYA

Sl. DSR- Description Qty Unit Scheduled Rate Non-Scheduled Scheduled Non- Schedule

No. 2023 (In Rs.) Rate Amount Amount (In Rs.)

15 2.3 Supplying and fixing following way, single pole and neutral, sheet steel,

MCB distribution board, 240 volts, on surface/ recess, complete with

tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

16 2.4 Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 volts, on surface/

recess, complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including earthing etc.

as required. (But without MCB/RCCB/Isolator)

17 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C"

curve, miniature circuit breaker suitable for inductive load of following

poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

2.10.2 Single pole and neutral 2.00 Each 643.00 1,286.00

18 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required. 4.00 Each 14.00 56.00

19 2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm,

made of mild steel, at least 2 mm thick, and vitreous enameled white

on both sides, and with inscription in single red colour on front side as

required. 1.00 Each 315.00 315.00

20 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting /

compact fluorescent fitting of all types, complete with all accessories

and tube/lamp etc. directly on ceiling/ wall, including connections with

1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable

and earthing etc. as required. 37.00 Each 259.00 9,583.00

21 1.50 Installation of exhaust fan in the existing opening, including making

good the damage, connection, testing, commissioning etc. as required.

22 NSDR Supply of 15W SURFACE MOUNTED ROUND LED with all

accessories as per standard item.. 4.00 Each 1,587.10 1,587.10 6,348.40

23 NSDR Supply of 20W SURFACE MOUNTED ROUND LED with all

accessories as per standard item..(Such as Panasonic ADL04R206 or

24 NSDR Supply of 15W WALL BRACKET LED BULB with all accessories as

per standard item..(Such as Panasonic PBUM01157 or Equivalent).

25 NSDR Supply of 20W SURFACE MOUNTED LED TUBE with all accessories

as per standard item..(Such as Panasonic PBTM01207 or Equivalent).

26 NSDR 30W LED recess mounted fixture MAKE-PHILIPS CAT NO. RC380B

LED30S-6500 L60W60 PSD OD S1 or equivalent. 6.00 Each 4,200.80 4,200.80 25,204.80

27 9.2.4 Brush Less Direct Current (BLDC) Fan without

Supply, Installation, Testing and Commissioning of Ceiling fan with

Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.

metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,

shackle kit, safety rope, copper winding, steel/Al body Power Factor

not less than 0.9, Service Value (CM/M/W) minimum as below, 350

RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion)

less than 10%, suitable for operation with regulator for speed control

and all remaining accessories including safety pin, nut bolts, washers,

temperature rise=75 0C (max.), insulation resistance more than 2

mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling

Fan compliant to IS 374:2019 fan i/c external connections with 1.5

sq.mm FRLS/HFFR, PVC insulated copper conductor single core

cable and earthing etc. as required.

1400mm, service value ≥ 6.0 CM/Min/Watt, air

delivery 245 CM/Min (Minimum)

28 NSDR Supply of AC 230/250 volts, 50 HZ exhaust fans including providing

nuts, bolts, mounting FRLSame and other accessories etc. complete

SAY IN LACS 2.61 0.64

Grand Total Amount 18,43,911.90 93,196.90

Grand Total Amount 18,43,911.90 93,196.90

Digitally signed by JAYA

NAME OF WORK :- SPECIAL REPAIR & MAINTENANCE WORK AT JNV RAYAGADA, ODISHA.

BILL OF QUANTITY FOR GIRLS DORMITORY (G+2) 1 BLOCK FOR 96 STUDENTS

Sl. DSR- Description Qty Unit Scheduled Rate Non- Scheduled Non-

No. 2023 (In Rs.) Scheduled Amount Schedule

Rate (In Rs.) Amount (In

(i) Structural Repair & Retrofitting

1 26.28 Chipping of unsound/weak concrete material from

slabs, beams, columns etc. with manual Chisel and/ or

by standard power driven percussion type or of

approved make including tapering of all edges, making

square shoulders of cavities including cleaning the

exposed concrete surface and reinforcement with wire

brushes etc. and disposal of debris for all lead and lifts

all complete as per direction of Engineer-In-Charge

A 26.28.2 50 mm average thickness 4.20 Sqm 249.43 1,047.60

B 26.28.3 25 mm average thickness 6.00 Sqm 123.33 739.97

2 26.29 Cleaning of reinforcement from rust from the

reinforcing bars to give it a total rust free steel surface

by using alkaline chemical rust remover of approved

make with paint brush and removing loose particles

after 24 hours of its application with wire brush and

thoroughly washing with water and allowing it to dry, all

complete as per direction of Engineer-In-Charge.

26.29.1 Bars upto 12 mm diameter 163.20 Mtr 8.03 1,310.05

3 26.37 Cleaning of exposed concrete surface of sticking

material including loose and foreign material by sand

blasting with coarse sand followed by and including

cleaning with oil free air blast as per direction of

Engineer in charge. 4.20 Sqm 372.08 1,562.72

4 26.38 Shotcreting R.C.C. columns, beams and slabs etc. in

layers with approved design mix concrete having the

specified minimum characteristic compressive strength

[with ordinary portland cement, coarse sand and

graded stone aggregate of 10 mm maximum size in

proportion as per design criteria] including the cost of

centering and shuttering at edges and corners etc. as

directed by Engineerin- Charge

Note: Rates shall include the providing necessary

ground wires etc. The levelling gauges, if used, shall

be paid for separately. Payment under this item shall

be made only after proper wet curing has been done

and surface has been satisfactorily evaluated by

sounding/ tapping with a blunt metal instrument.

A 26.38.1 25mm thick in Grade M 25 with cement content not

less than 330 kg per cum 6.00 Sqm 726.73 4,360.40

B 26.38.2 50mm thick in Grade M 25 with cement content not

less than 330 kg per cum 4.20 Sqm 1119.97 4,703.88

5 MR Re-Baring of MS bar 10 mm dia with Fisher Chemical

including drilling of hole, cleaning, and fixing of bar

complete as per direction of Engineer-in-Charge.

Expansion Joint Treatment

Digitally signed by JAYA

6 5.44 Providing and fixing of expansion joint system related

with floor location as per drawings and direction of

Engineer-In-Charge. The joints system will be of

extruded aluminum base members, self aligning / self

centering arrangement and support plates etc. as per

ASTM B221-02. The system shall be such that it

provides floor to floor /floor to wall expansion control

system for various vertical localtion in load application

areas that accommodates multi directional seismic

movement without stress to it's components. System

shall consist of metal profiles with a universal

aluminum base member designed to accommodate

various project conditions and finish floor treatments.

The cover plate shall be designed of width and

thickness required to satisfy projects movement and

loading requirements and secured to base members by

utilizing manufacturer’s pre-engineered self- centering

arrangement that freely rotates / moves in all

directions. The Self - centering arrangement shall

exhibit circular sphere ends that lock and slide inside

the corresponding aluminum extrusion cavity to allow

freedom of movement and flexure in all directions

including vertical displacement. Provision of Moisture

Barrier Membrane in the Joint System to have

watertight joint is mandatory requirement all as per the

manufactures design and as approved by Engineer -in-

Charge. (Material shall confirm to ASTM 6063).

7 5.45 Providing and fixing of expansion joint system related

with wall joint (internal/ external) location as per

drawings and direction of Engineer-In- Charge. The

joints shall be of extruded aluminum base members,

self aligning / centering arrangement and support

plates as per ASTM B221- 02. The material shall be

such that it provides an Expansion Joints System

suitable for vertical wall to wall/ wall to corner

application, both new and existing construction in office

Buildings & complexes with no slipping down tendency

amongst the components of the Joint System. The

Joint System shall utilize light weight aluminum profiles

exhibiting minimal exposed aluminum surfaces

mechanically snap locking the multicellular to facilitate

movement. (Material shall confirm to ASTM 6063).

8 5.46 Providing and fixing of expansion joint system of

approved make and manufacture for various roof

locations as per approved drawings and direction of

Engineer-In-Charge. The joints shall be of extruded

aluminum base members with, self aligning and self

centering arragement support plates as per ASTM

B221-02. The system shall be such that it provides

water tight roof to roof /roof to corner joint cover

expansion control system that is capable of

accommodating multidirectional seismic movement

without stress to its components. System shall consist

of metal profile that incorporates a universal aluminum

base member designed to accommodate various

project conditions and roof treatments. The cover plate

shall be designed of width and thickness required to

satisfy movement and loading requirements and

secured to base members by utilizing manufacturer’s

pre-engineered self-centering arrangement that freely

rotates / moves in all directions. The Self centering

arrangement shall exhibit circular sphere ends that lock

and slide inside the corresponding aluminum extrusion

cavity to allow freedom of movement and flexure in all

directions including vertical displacement. The Joint

System shall resists damage or deterioration from the

impact of falling ice, exposure to UV, airborne

contaminants and occasional foot traffic from

maintenance personnel. Provision of Moisture Barrier

Membrane in the Joint System to have water tight joint

is mandatory requirement. (Material shall confirm to

(FOR 1 BLOCK): 3.34 0.08

Digitally signed by JAYA

(ii) Repairs to Roof

9 14.91.1 Providing and laying APP (Atactic Polypropylene

Polymer) modified prefabricated five layer 3 mm thick

water proofing membrane, black finished reinforced

with non-woven polyester matt consisting of a coat of

bitumen primer for bitumen membrane @ 0.40

litre/sqm by the same membrane manufacture of

density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160

cps. Over the primer coat the layer of membrane shall

be laid using Butane Torch and sealing all joints etc,

and preparing the surface complete. The vital physical

and chemical parameters of the membrane shall be as

under : Joint strength in longitudinal and transverse

direction at 23°C as 650/ 450N/ 5cm. Tear strength in

longitudinal and transverse direction as 300/250N.

Softening point of membrane not less than 150°C. Cold

flexibility shall be upto -2°C when tested in accordance

with ASTM, D - 5147. The laying of membrane shall be

got done through the authorised applicator of the

manufacturer of membrane : 3 mm thick

10 14.92 Extra for covering top of membrane with Geotextile,

120 gsm non woven, 100% polyester of thickness 1 to

1.25 mm bonded to the membrane with intermittent

touch by heating the membrane by Butane Torch as

per manufactures recommendation.

11 22.14.1 Grading roof for water proofing treatment with

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20mm nominal size) 32.01 Cum 7825.16 2,50,483.30

SUB TOTAL 5,20,300.08 -

(FOR 1 BLOCK): 5.20 -

(iii) Repair to Toilets

1 15.23 Dismantling tile work in floors and roofs laid in cement

mortar including stacking material within 50 metres

15.23.1 For thickness of tiles 10 mm to 25 mm 479.02 Sqm 71.42 34,210.75

2 Analysis Providing and fixing Ist quality Glazed vitrified tiles

polished finish of size 600 x 600 mm tiles conforming

to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any

size as approved by Engineer-in-Charge, in skirting,

risers of steps and dados, over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment

of matching shade complete.

3 11.41A.3.1 Providing and laying Vitrified tiles in floor in different

sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming

to IS:15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with grey

cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc.

The tiles must be cut with the zero chipping diamond

cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness,

leveling system and rubber mallet for placing the tiles

gently and easily.Glazed Vitrified tiles Matt/Antiskid

finish of size of Tile 600 x 600 mm

Digitally signed by JAYA

4 22.5 Providing and laying water proofing treatment in

sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement

compound consisting of applying : a) First layer of

slurry of cement @ 0.488 kg/sqm mixed with water

proofing cement compound @ 0.253 kg/sqm. This

layer will be allowed to air cure for 4 hours. b) Second

layer of slurry of cement @ 0.242 kg/sqm mixed with

water proofing cement compound @ 0.126 kg/sqm.

This layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours. The rate

includes preparation of surface, treatment and sealing

of all joints, corners, junctions of pipes and masonry

with polymer mixed slurry. 116.72 SQM 600.39 70,077.48

5 MR Providing and filling of cinder in sunken portions. 16.03 CUM 2,374.40 38,061.63

6 15.56 Dismantling old plaster or skirting raking out joints and

cleaning the surface for plaster including disposal of

rubbish to the dumping ground within 50 metres lead.

7 13.5 15mm cement plaster on rough side of single or half

brick wall of mix

8 13.16 6mm cement plaster to ceiling of mix :

9 13.82 Wall painting with acrylic emulsion paint, having VOC

(Volatile Organic Compound) content less than 50

grams/ litre, of approved brand and manufacture,

including applying additional coats wherever required,

to achieve even shade and colour.

10 13.80 Providing and applying white cement based putty of

average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to

prepare the surface even and smooth complete. 165.34 Sqm 151.84 25,104.67

11 15.12 Dismantling doors, windows and clerestory windows

(steel or wood) shutter including chowkhats, architrave,

holdfasts etc. complete and stacking within 50 metres

15.12.1 Of area 3 sq. metres and below 8.00 Each 357.29 2,858.28

12 15.13 Taking out doors, windows and clerestory window

shutters (steel or wood) including stacking within 50

15.13.1 Of area 3 sq. metres and below 10.00 Each 139.63 1,396.26

13 14.5 Renewing glass panes, with putty and nails wherever

including racking out the old putty: -

14.5.1 Float glass panes of nominal thickness 4 mm

(weight not less than 10kg/sqm) 1.35 Sqm 1061.20 1,432.62

14 14.9 Renewal of old putty of glass panes (length) 18.00 Mtr 54.63 983.41

15 9.48.1 Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or round

bars etc. including priming coat with approved steel

primer all complete .Fixed to steel windows by welding

16 9.68 Providing and fixing oxidised M.S. casement stays

(straight peg type) with necessary screws etc. complete

9.68.1 300 mm weighing not less than 200gms. - Each 65.58 -

9.68.2 250 mm weighing not less than 150gms. 6.00 Each 59.40 356.41

17 9.70 Providing and fixing IS : 12817 marked stainless steel

butt hinges with stainless steel screws etc. complete :

18 9.165 Providing and fixing bright /matt finished Stainless

Steel handles of approved quality & make with

necessary screws etc all complete. (a) 125 mm.

Digitally signed by JAYA

19 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias

and similar locations of required size,approved shade,

colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated

with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding

and polishing to edges to give high gloss finish etc.

complete at all levels. Area of slab upto 0.50 sqm

20 9.122 Providing and fixing to existing door frames. -

9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.)

flush door shutter in different plain and wood finish

made with fire retardant grade unsaturated polyester

resin, moulded to 3 mm thick FRP laminate all around,

with suitable wooden blocks inside at required places

for fixing of fittings and polyurethane foam PUF)/

Polystyrene foam to be used as filler material

throughout the hollow panel, casted monolithically with

testing parameters of F.R.P. laminate conforming to

table - 3 of IS: 14856, complete as per direction of

Engineer-in-charge.

21 10.11 Providing and fixing factory made ISI marked steel

glazed doors, windows and ventilators, side /top /centre

hung, with beading and all members such as F7D,

F4B, K11 B and K12 B etc. complete of standard rolled

steel sections, joints mitred and flash butt welded and

sash bars tenoned steel sections, joints mitred and

flash butt welded and sash bars tenoned and riveted,

including providing and fixing of hinges, pivots,

including priming coat of approved steel primer, but

excluding the cost of other fittings, complete all as per

approved design, (sectional weight of only fittings,

complete all as per approved design, (sectional weight

of only steel members shall be measured for payment).

10.11.1 Fixing with 15x3 mm lugs 10 cm long embedded in

cement concrete block 15x10x10 cm of C.C. 1:3:6 (1

Cement : 3 coarse sand : 6 graded stone aggregate 20

mm nominal size 77.76 Kg 127.51 9,915.31

22 10.15 Providing and fixing M.S. Tubular frames for doors,

windows, ventilators and cupboard with rectangular/ L-

Type sections, made of 1.60 mm thick M.S. Sheet,

joints mitred, welded and grinded finish, with profiles of

required size, including fixing of necessary butt hinges

and screws and applying a priming coat of approved

10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in

cement concrete block 15x10x10 cm of C.C. 1:3:6 (1

Cement : 3 coarse sand : 6 graded stone aggregate 20

mm nominal size) 140.26 Kg 189.93 26,639.53

23 10.30 Providing & fixing glass panes with putty and glazing

clips in steel doors,windows, clerestory windows, all

10.30.1 4.0 mm thick glass panes 4.32 Sqm 1035.90 4,475.11

13.50 Applying priming coat :

24 13.50.3 With ready mixed red oxide zinc chromate primer of

approved brand and manufacture on steel galvanised

iron/ steel works 0.78 Sqm 65.58 51.15

25 13.61 Painting with synthetic enamel paint of approved brand

and manufacture of required colour to give an even

13.61.1 Two or more coats on new work 0.78 Sqm 151.69 118.32

1 15.42 Dismantling C.I. or asbestos rain water pipe with

fittings and clamps including stacking the material

within 50 metres lead :

2 15.44 Dismantling G.I. pipes (external work) including -

excavation and refilling trenches after taking out the

pipes, manually/ by mechanical means including

stacking of pipes within 50 metres lead as per direction

of Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore 55.00 Mtr 145.76 8,016.55

Digitally signed by JAYA

3 15.45 Dismantling C.I. pipes including excavation and refilling -

trenches after taking out the pipes, manually/ by

mechanical means breaking lead caulked joints,

melting of lead and making into blocks including

stacking of pipes & lead at site within 50 metre lead as

per direction of Engineer-in-charge:

4 15.48 Taking out C.I. cover with frame from R.C.C. top slab 2,714.28

of manholes of various sizes including demolishing of

R.C.C. work manually/ by mechanical means and

stacking of useful materials near the site and disposal

of unserviceable materials within 50 metres lead as per

direction of Engineer-in-charge.

5 15.51 Dismantling of road gully chamber of various sizes 3,731.46

including C.I. grating with frame including stacking of

useful materials near the site and disposal of

unserviceable materials within 50 metres lead including

refilling the excavated gap. 4.00 Each 932.86

6 14.82 Dismantling W.C. Pan of all sizes including disposal of 2,609.59

dismantled materials i/c malba all complete as per

directions of Engineer-in- Charge. 20.00 Each 130.48

7 15.53 Dismantling of C.I. sluice valve including stacking of -

useful materials within a lead of 50 metres

15.53.1 Up to 150 mm diameter 5.00 Each 310.87 1,554.37

8 19.24 Dismantling of manhole including R.C.C. top slab, C.I. -

cover with frame, including stacking of useful materials

near the site and disposal of unserviceable materials

within 50 m lead as per direction of Engineer- charge :

19.24.1 Rectangular manhole 90x80 cm and 45 cm deep 2.00 Each 2472.25 4,944.49

9 12.41 Providing and fixing on wall face unplasticised Rigid -

PVC rain water pipes conforming to IS : 13592 Type A,

including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion, (i) Single

socketed pipes.

10 12.42 Providing and fixing on wall face unplasticised - PVC -

moulded fittings/ accessories for unplasticised Rigid

PVC rain water pipes conforming to IS : 13592 Type A,

including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

12.42.1.2 a) Coupler -

11 13.96 Painting (one or more coats) on rain water, soil, waste -

and vent pipes and fittings with synthetic enamel paint

of approved brand and manufacture and required

colour on old work :

13.96.1 75 mm diameter pipes 15.00 Mtr 27.44 411.58

13.96.2 100 mm diameter pipes 15.00 Mtr 35.27 529.07

12 17.1 Providing and fixing water closet squatting pan (Indian -

type W.C. pan ) with 100 mm sand cast Iron P or S

trap, 10 litre low level white P.V.C. flushing cistern,

including flush pipe, with manually controlled device

(handle lever) conforming to IS : 7231, with all fittings

and fixtures complete, including cutting and making

good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 1,05,354.88

580x440 mm with integral type foot rests 16.00 Each 6584.68

13 17.2 Providing and fixing white vitreous china pedestal type -

water closet (European type W.C. pan) with seat and

lid, 10 litre low level white P.V.C. flushing cistern,

including flush pipe, with manually controlled device

(handle lever), conforming to IS : 7231, with all fittings

and fixtures complete, including cutting and making

good the walls and floors wherever required.

17.2.1 W.C. pan with ISI marked white solid plastic seat and 25,358.52

Digitally signed by JAYA

14 17.7 Providing & fixing white vitreous china wash basin with -

C.I. brackets painted white, 15mm C.P. brass pillar

taps, C.P. brass chain with rubber plug, 32mm C.P.

brass waste of standard pattern including cutting &

making good the walls wherever required.

17.7.4 a) Flat back wash Basin size 550x400 mm with single 3,656.92

15mm C.P. brass pillar tap. 2.00 Each 1828.46

15 17.23 Providing and fixing white vitreous china flat back or 12,835.43

wall corner type lipped front urinal basin of

430x260x350 mm or 340x410x265 mm sizes

respectively. 8.00 Each 1604.43

16 17.28 Providing and fixing flexible P.V.C. waste pipe for sink -

or wash basin including PVC waste fittings complete.

17.28.2.1 a) 32mm dia (for wash basin) 2.00 Each 116.32 232.64

17.28.2.2 b) 40mm dia (for sink and urinal) 8.00 Each 116.32 930.58

17 MR Providing & fixing C.P. Brass health faucet for ablution 7,324.00

with 1 meter long PVC tube, hand shower, couplings,

wall hook and other accessories. 4.00 Each 1831.00

18 MR Providing & fixing C.P. Brass Waste Coupling for PVC 20,760.00

waste Pipe. 12.00 Each 1730.00

19 Providing, fixing, jointing and testing in position of ISI -

marked UV stabilized UPVC pipes for soil, waste, and

vent, Type-B as per IS : 13592 suitable for rubber ring

joints, including all neccessary specials and fittings

(confirming to IS:14735) i.e. bends, tees, junctions

(with or without doors), reducers, WC connectors,

couplers, expansion joints / bellows, cowels, clamps,

rubber rings, clean outs etc. fixing at wall/ ceiling/ floor

level supported by clamp & hangers etc. in concealed /

inside duct / under floor & basement ceiling / external

work etc. including chase cutting as required,

excavation and back filling in all kind of soils,

suspended from floor under false ceiling or embedding

the pipes laid under floors / building in 75 mm. alround

1:2:4 cement concrete (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) including

cost of shuttering for proper completion of the work,

breaking and making good the walls and floors etc.

after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.The Pipes will be

supported with threaded G I rods & U clamps with nuts,

washers etc on 50x50x5 mm slotted angle. The cost

will include all support arrangements. The work

includes commissioning of all pipes lines as per

drawings and specifications and as directed by engg-in-

charge at site.

MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) 15.00 Mtr 750.00 11,250.00

MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) 20.00 Mtr 550.00 11,000.00

20 Providing & fixing UPVC Floor trap of self cleansing -

design with stainless steel grating complete in all

MR Multi Floor Trap (5" Ht) with height raiser and branch 1,346.00

saddle strip of 50/75 mm outlet 2.00 Each 673.00

MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with 831.00

height raiser 1.00 Each 831.00

MR P-Trap type Floor Trap 110 x 75 mm 2.00 Each 565.00 1,130.00

21 MR Extra for providing & fixing 125 mm dia C.P. grating in 2,985.00

place of C.I. grating over floor traps. 5.00 Each 597.00

22 MR Providing & fixing of SS Floor Cleanout, round or

square with rubber seal and flat round cover with

screws and other required fitting complete as required.

Providing and fixing 100 mm sand cast Iron grating for 207.25

gully trap. 51.81

24 17.35 Providing & fixing soil, waste and vent pipes. -

17.35.1.2 a) 100mm dia centrifugally cast iron S & S pipe. 5.00 Mtr 1148.87 5,744.35

17.35.2.2 b) 75mm dia centrifugally cast iron S & S pipe. 5.00 Mtr 1153.98 5,769.89

Digitally signed by JAYA

25 17.37 Providing & fixing M.S. holder bat clamps of approved -

design to sand cast iron/centrifugally cast (Spun) iron S

& S pipe embeded in & including cement concrete

blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse :

4 graded stone aggregate 20mm nominal size).

Including cost of cutting holes & making good the walls

26 17.38 Providing and fixing bend of required degree with -

access door, insertion rubber washer 3mm thick, bolts

and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 2.00 Each 686.16 1,372.32

17.38.2.2 Sand cast iron S&S as per IS- 3989 2.00 Each 508.49 1,016.98

27 17.39 Providing and fixing plain cast iron S & S sanitary -

17.39.1.1 Sand cast iron S&S as per IS - 1729 2.00 Each 457.75 915.50

17.39.2.2 Sand cast iron S&S as per IS - 3989 2.00 Each 379.96 759.91

28 17.43 Providing and fixing centrifugaly cast iron single equal -

plain junction of required degree.

29 17.56 Providing and fixing cast iron terminal guard. -

30 17.57 Providing & fixing cast iron coller. -

17.57.1.2 Sand cast iron S&S as per IS - 3989 2.00 Each 499.29 998.59

17.57.2.2 Sand cast iron S&S as per IS - 3989 2.00 Each 352.27 704.55

31 17.58 Providing lead caulked joints to sand cast -

iron/centrifugally cast (spun) iron pipes & fitting of

32 17.60 Providing & fixing cast iron trap of self cleansing design -

with or without ventarm complete, including cost of

cutting & making good the walls & floors.

33 17.75 Providing and fixing PTMT 15 mm Urinal spreader size 834.44

95x69x100 mm with 1/2" BSP thread and shapes,

weighing not less than 60 gms. 8.00 Each 104.31

34 17.76 Providing and fixing PTMT urinal cock of approved -

quality and colour.

17.76.1 15 mm nominal bore, 80 mm long, 42 mm high and 1,365.31

30mm wide with BSP female threads weighing not less

than 48 gms 8.00 Each 170.66

35 18.8 Providing and fixing Chlorinated Polyvinyl Chloride -

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00

m spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

18.8.1 15 mm nominal outer dia Pipes 55.00 Mtr 484.36 26,639.77

18.8.2 20 mm nominal outer dia Pipes 45.00 Mtr 523.08 23,538.82

18.8.3 25 mm nominal outer dia Pipes 35.00 Mtr 610.31 21,361.00

18.8.4 32 mm nominal outer dia Pipes 25.00 Mtr 719.34 17,983.47

36 18.16 Providing and fixing brass stop cock of approved -

37 18.17 Providing and fixing gun metal gate valve with wheel of -

approved quality.

18.17.1 a) 25mm dia nominal bore 4.00 Each 605.60 2,422.38

18.17.2 b) 32mm dia nominal bore 4.00 Each 670.98 2,683.92

Digitally signed by JAYA

38 18.18 Providing and fixing ball valve (brass) of approved -

quality complete. (High or low pressure with plastic

18.18.3 a) 25mm. Nominal bore 4.00 Each 451.52 1,806.08

39 18.21 Providing and fixing 30 cm long unplasticised PVC -

connection pipe with brass unions.

18.21.1.1 a) 15mm nominal bore 4.00 Each 82.71 330.82

40 18.21 Providing and fixing 45 cm long unplasticised PVC -

connection pipe with brass unions.

18.21.2.1 a) 15mm nominal bore 4.00 Each 95.11 380.44

41 18.48 Providing and placing on terrace (at all floor levels) 1,07,030.00

polyethylene water storage tank of approved brand and

manufacture with cover and suitable locking

arrangement and making necessary holes for inlet,

outlet and overflow pipes but without fittings and the

base support for tank. 10000.00 Ltr 10.70

42 18.49 Providing & fixing CP brass bib cock of approved -

quality conforming to IS 8931

18.49.1 a) 15mm nominal bore 20.00 Each 493.12 9,862.33

43 18.51 Providing & fixing C.P. brass long body bib cock of -

approved quality conforming to IS standards and

weighing not less than 690 gms.

18.51.1 a) 15mm nominal bore 1.00 Each 777.38 777.38

44 18.53 Providing and fixing C.P. brass angle valve for basin -

mixer and geyser points of approved quality conforming

18.53.1 15mm nominal bore 2.00 Each 558.79 1,117.59

45 18.53A Providing and fixing C.P. Brass extension nipple (size 145.56

15mmx50mm) of approved make and quality as per

direction of Engineer-in-charge. 2.00 Each 72.78

46 18.75 Providing and fixing PTMT extension nipple for water -

tank pipe, fittings of approved quality and colour.

18.75.3 25mm nominal bore, weighing not less than 62 gms 220.58

47 18.76 Cutting holes up to 30x30 cm in walls including making -

18.76.1 With common burnt clay F.P.S. (non modular) bricks 1,622.19

48 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs 1,759.18

for passing drain pipe etc. and repairing the hole after

insertion of drain pipe etc. with cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), including finishing complete so

as to make it leak proof.

49 18.78 Making chases up to 7.5x7.5 cm in walls including 4,935.54

making good and finishing with matching surface after

housing G.I. pipe etc. 25.00 Mtr 197.42

Say (In Lacs): 24.02 0.96

ELECTRICAL WORKS

1 1.8 Wiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FR PVC insulated copper

conductor single core cable in surface / recessed

medium class PVC conduit, with piano type switch,

phenolic laminated sheet, suitable size M.S. box and

earthing the point with 1.5 sq.mm. FR PVC insulated

copper conductor single core cable etc as required.

2 1.9 Wiring for twin control light point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, 2 way

piano type switch, phenolic laminated sheet, suitable

size MS box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core

cable etc. as required.

Digitally signed by JAYA

3 1.12 Wiring for light/ power plug with 2X4 sq. mm FR PVC

insulated copper conductor single core cable in

surface/ recessed medium class PVC conduit

alongwith 1 No 4 sq. mm FR PVC insulated copper

conductor single core cable for loop earthing as

4 1.14 Wiring for circuit/ submain wiring alongwith earth wire

with the following sizes of FR PVC insulated copper

conductor, single core cable in surface/ recessed

medium class PVC conduit as required

5 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FR PVC insulated copper

conductor single core cable and 1.5 sq.mm. FR PVC

insulated copper conductor single core cable as earth

wire in existing surface/ recessed steel conduit

including dismantling as required.

6 1.16 Rewiring for twin control light point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core

cable and 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable as earth wire in existing

surface/ recessed steel/PVC conduit including

dismantling as required. 4.00 Point 1,064.00 4,256.00

7 1.17 Supplying and drawing following sizes of FR PVC

insulated copper conductor, single core cable in the

existing surface/ recessed steel/ PVC conduit as

8 1.21 Supplying and fixing of following sizes of medium class

PVC conduit along with accessories in surface/recess

including cutting the wall and making good the same in

case of recessed conduit as required.

9 1.22 Supplying and fixing metal box of following sizes

(nominal size) on surface or in recess with suitable size

of phenolic laminated sheet cover in front including

painting etc. as required.

10 1.25 Supplying and fixing stepped type electronic fan

regulator on the existing modular plate switch box

including connections but excluding modular plate etc.

as required. 6.00 Each 402.00 2,412.00

11 1.29 Supplying and fixing metal box of 150mm X 75mm X

60mm deep (nominal size) on surface or in recess with

suitable size of phenolic laminated sheet cover in front

including providing and fixing 3 pin 5/6 amps socket

outlet and 5/6 amps piano type switch, connection,

painting etc. as required. (For light plugs to be used in

non residential buildings).

12 1.30 Supplying and fixing metal box of 180mm X 100mm X

60mm deep (nominal size) on surface or in recess with

suitable size of phenolic laminated sheet cover in front

including providing and fixing 6 pin 5/6 & 15/16 amps

socket outlet and 15/16 amps piano type switch,

connection, painting etc. as required.

13 1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the

existing junction box/ wooden block including

connection etc as required. 20.00 Each 104.00 2,080.00

14 1.34 Supplying and fixing brass batten/ angle holder

including connection etc. as required. 15.00 Each 154.00 2,310.00

15 1.38 Supplying and fixing call bell/ buzzer suitable for single

phase, 230 volts, complete as required. 2.00 Each 112.00 224.00

Digitally signed by JAYA

16 2.3 Supplying and fixing following way, single pole and

neutral, sheet steel, MCB distribution board, 240 volts,

on surface/ recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

17 2.4 Supplying and fixing following way, horizontal type

three pole and neutral, sheet steel, MCB distribution

board, 415 volts, on surface/ recess, complete with

tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including

earthing etc. as required. (But without

MCB/RCCB/Isolator)

18 2.10 Supplying and fixing 5 amps to 32 amps rating,

240/415 volts, "C" curve, miniature circuit breaker

suitable for inductive load of following poles in the

existing MCB DB complete with connections, testing

and commissioning etc. as required.

2.10.2 Single pole and neutral 6.00 Each 643.00 3,858.00

19 2.11 Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required. 10.00 Each 14.00 140.00

20 2.21 Providing and fixing M.V. danger notice plate of 200

mm X 150 mm, made of mild steel, at least 2 mm thick,

and vitreous enameled white on both sides, and with

inscription in single red colour on front side as required.

21 1.41 Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting of all

types, complete with all accessories and tube/lamp etc.

directly on ceiling/ wall, including connections with 1.5

sq. mm FRLS PVC insulated, copper conductor, single

core cable and earthing etc. as required.

22 NSDR Supply of 15W SURFACE MOUNTED ROUND LED

with all accessories as per standard item.. 5.00 Each 1,587.10 7,935.50

23 NSDR Supply of 20W SURFACE MOUNTED ROUND LED

with all accessories as per standard item..(Such as

Panasonic ADL04R206 or Equivalent).

24 NSDR Supply of 15W WALL BRACKET LED BULB with all

accessories as per standard item..(Such as Panasonic

PBUM01157 or Equivalent). 10.00 Each 446.04 4,460.40

25 NSDR Supply of 20W SURFACE MOUNTED LED TUBE with

all accessories as per standard item..(Such as

Panasonic PBTM01207 or Equivalent). 10.00 Each 1,058.46 10,584.60

26 9.2.3 Brush Less Direct Current (BLDC) Fan without

Supply, Installation, Testing and Commissioning of

ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. metal( Aluminium

alloy) blades, 30 cm long down rod, 2 nos. canopies,

shackle kit, safety rope, copper winding, steel/Al body

Power Factor not less than 0.9, Service Value

(CM/M/W) minimum as below, 350 RPM (tolerance as

per IS : 374-2019), THD (Total Harmonic Distortion)

less than 10%, suitable for operation with regulator for

speed control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise=75 0C

(max.), insulation resistance more than 2 mega ohm,

suitable for 230 V, 50 Hz, single phase AC supply,

Ceiling Fan compliant to IS 374:2019 fan i/c external

connections with 1.5 sq.mm FRLS/HFFR, PVC

insulated copper conductor single core cable

and earthing etc. as required.

(FOR 1 BLOCK): 2.63 0.29

Say (In Lacs): 35.20 1.33

Digitally signed by JAYA

NAME OF WORK :- SPECIAL REPAIR & MAINTENANCE WORK AT JNV RAYAGADA, ODISHA.

ELECTRICAL WORK OF BOYS DORMITORY

Sl. DSR- Description Qty Unit Scheduled Non- Scheduled Non-

No. 2025 Rate Scheduled Amount Schedule

(In Rs.) Rate (In Rs.) Amount (In

1 1.8 Wiring for light point/ fan point/ exhaust fan point/

call bell point with 1.5 sq.mm FR PVC insulated

copper conductor single core cable in surface /

recessed medium class PVC conduit, with piano

type switch, phenolic laminated sheet, suitable size

M.S. box and earthing the point with 1.5 sq.mm. FR

PVC insulated copper conductor single core cable

etc as required.

2 1.9 Wiring for twin control light point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC

conduit, 2 way piano type switch, phenolic

laminated sheet, suitable size MS box and earthing

the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc. as required.

3 1.12 Wiring for light/ power plug with 2X4 sq. mm FR

PVC insulated copper conductor single core cable

in surface/ recessed medium class PVC conduit

alongwith 1 No 4 sq. mm FR PVC insulated copper

conductor single core cable for loop earthing as

4 1.14 Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FR PVC insulated

copper conductor, single core cable in surface/

recessed medium class PVC conduit as required

5 1.15 Rewiring for light point/ fan point/ exhaust fan point/

call bell point with 1.5 sq.mm FR PVC insulated

copper conductor single core cable and 1.5 sq.mm.

FR PVC insulated copper conductor single core

cable as earth wire in existing surface/ recessed

steel conduit including dismantling as required.

6 1.16 Rewiring for twin control light point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core

cable and 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable as earth wire in existing

surface/ recessed steel/PVC conduit including

dismantling as required.

7 1.17 Supplying and drawing following sizes of FR PVC

insulated copper conductor, single core cable in the

existing surface/ recessed steel/ PVC conduit as

8 1.21 Supplying and fixing of following sizes of medium

class PVC conduit along with accessories in

surface/recess including cutting the wall and

making good the same in case of recessed conduit

9 1.22 Supplying and fixing metal box of following sizes

(nominal size) on surface or in recess with suitable

size of phenolic laminated sheet cover in front

including painting etc. as required.

Digitally signed by JAYA

Sl. DSR- Description Qty Unit Scheduled Non- Scheduled Non-

No. 2025 Rate Scheduled Amount Schedule

(In Rs.) Rate (In Rs.) Amount (In

10 1.25 Supplying and fixing stepped type electronic fan

regulator on the existing modular plate switch box

including connections but excluding modular plate

etc. as required. 6.00 Each 402.00 2,412.00

11 1.29 Supplying and fixing metal box of 150mm X 75mm

X 60mm deep (nominal size) on surface or in

recess with suitable size of phenolic laminated

sheet cover in front including providing and fixing 3

pin 5/6 amps socket outlet and 5/6 amps piano type

switch, connection, painting etc. as required. (For

light plugs to be used in non residential buildings).

12 1.30 Supplying and fixing metal box of 180mm X 100mm

X 60mm deep (nominal size) on surface or in

recess with suitable size of phenolic laminated

sheet cover in front including providing and fixing 6

pin 5/6 & 15/16 amps socket outlet and 15/16 amps

piano type switch, connection, painting etc. as

required. 5.00 Each 558.00 2,790.00

13 1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on

the existing junction box/ wooden block including

connection etc as required. 20.00 Each 104.00 2,080.00

14 1.34 Supplying and fixing brass batten/ angle holder

including connection etc. as required. 15.00 Each 154.00 2,310.00

15 1.38 Supplying and fixing call bell/ buzzer suitable for

single phase, 230 volts, complete as required. 2.00 Each 112.00 224.00

16 2.3 Supplying and fixing following way, single pole and

neutral, sheet steel, MCB distribution board, 240

volts, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

17 2.4 Supplying and fixing following way, horizontal type

three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess,

complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

18 2.10 Supplying and fixing 5 amps to 32 amps rating,

240/415 volts, "C" curve, miniature circuit breaker

suitable for inductive load of following poles in the

existing MCB DB complete with connections,

testing and commissioning etc. as required.

2.10.2 Single pole and neutral 6.00 Each 643.00 3,858.00

19 2.11 Supplying and fixing single pole blanking plate in

the existing MCB DB complete etc. as required. 10.00 Each 14.00 140.00

20 2.21 Providing and fixing M.V. danger notice plate of 200

mm X 150 mm, made of mild steel, at least 2 mm

thick, and vitreous enameled white on both sides,

and with inscription in single red colour on front side

as required. 1.00 Each 315.00 315.00

Digitally signed by JAYA

Sl. DSR- Description Qty Unit Scheduled Non- Scheduled Non-

No. 2025 Rate Scheduled Amount Schedule

(In Rs.) Rate (In Rs.) Amount (In

21 1.41 Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting of all

types, complete with all accessories and tube/lamp

etc. directly on ceiling/ wall, including connections

with 1.5 sq. mm FRLS PVC insulated, copper

conductor, single core cable and earthing etc. as

required. 30.00 Each 259.00 7,770.00

22 NSDR Supply of 15W SURFACE MOUNTED ROUND LED

with all accessories as per standard item.. 5.00 Each 1,587.10 7,935.50

23 NSDR Supply of 20W SURFACE MOUNTED ROUND LED

with all accessories as per standard item..(Such as

Panasonic ADL04R206 or Equivalent).

24 NSDR Supply of 15W WALL BRACKET LED BULB with all

accessories as per standard item..(Such as

Panasonic PBUM01157 or Equivalent). 10.00 Each 446.04 4,460.40

25 NSDR Supply of 20W SURFACE MOUNTED LED TUBE

with all accessories as per standard item..(Such as

Panasonic PBTM01207 or Equivalent).

26 9.2.3 Brush Less Direct Current (BLDC) Fan without

Supply, Installation, Testing and Commissioning of

ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. metal(

Aluminium alloy) blades, 30 cm long down rod, 2

nos. canopies, shackle kit, safety rope, copper

winding, steel/Al body Power Factor not less than

0.9, Service Value (CM/M/W) minimum as below,

350 RPM (tolerance as per IS : 374-2019), THD

(Total Harmonic Distortion) less than 10%, suitable

for operation with regulator for speed control and

all remaining accessories including safety pin, nut

bolts, washers, temperature rise=75 0C (max.),

insulation resistance more than 2 mega ohm,

suitable for 230 V, 50 Hz, single phase AC supply,

Ceiling Fan compliant to IS 374:2019 fan i/c

external connections with 1.5 sq.mm FRLS/HFFR,

PVC insulated copper conductor single core cable

and earthing etc. as required.

(FOR 1 BLOCK): 2.63 0.29

Digitally signed by JAYA

NAME OF WORK :- SPECIAL REPAIR & MAINTENANCE WORK AT JNV RAYAGADA, ODISHA.

BILL OF QUANTITY FOR TYPE - 4 STAFF QUARTER

Sl. DSR- Description Qty Unit Scheduled Non-Scheduled Scheduled Non- Schedule

No. 2023 Rate Rate Amount Amount (In Rs.)

(ii) Repairs to Roof

1 14.91.1 Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer 3 mm thick water

proofing membrane, black finished reinforced with non-

woven polyester matt consisting of a coat of bitumen

primer for bitumen membrane @ 0.40 litre/sqm by the

same membrane manufacture of density at 25°C, 0.87-

0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane

Torch and sealing all joints etc, and preparing the surface

The vital physical and chemical parameters of the

membrane shall be as under : Joint strength in longitudinal

and transverse direction at 23°C as 650/ 450N/ 5cm. Tear

strength in longitudinal and transverse direction as

300/250N. Softening point of membrane not less than

150°C. Cold flexibility shall be upto -2°C when tested in

accordance with ASTM, D - 5147. The laying of

membrane shall be got done through the authorised

applicator of the manufacturer of membrane :

2 14.92 Extra for covering top of membrane with Geotextile, 120

gsm non woven, 100% polyester of thickness 1 to 1.25

mm bonded to the membrane with intermittent touch by

heating the membrane by Butane Torch as per

manufactures recommendation. 94.50 Sqm 86.50 8,174.22

3 22.14.1 Grading roof for water proofing treatment with

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20mm nominal size) 7.09 Cum 7825.16 55,480.37

SUB TOTAL: 1,15,233.10 -

Say (In Lacs): 1.15 -

Digitally signed by JAYA

NAME OF WORK :- SPECIAL REPAIR & MAINTENANCE WORK AT JNV RAYAGADA, ODISHA.

BILL OF QUANTITY FOR 450 X 600 MM WIDE R.C.C. DRAINS

Sl. DSR- Description Qty Unit Scheduled Rate Non-Scheduled Rate Scheduled Amount Non- Schedule

No. 2023 (In Rs.) (In Rs.) (In Rs.) Amount (In Rs.)

1 Earth work in excavation by mechanical means

(Hydraulic excavator)/ manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well

as 10 sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift

upto 1.5 m, as directed by Engineer-incharge.

All kinds of soil

2 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

3 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived

from natural sources : 8 graded stone aggregate

40 mm nominal size derived from natural sources)

4 Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate

and fine aggregate derived from natural sources,

Portland Pozzolana / Ordinary Portland /Portland

Slag cement, admixtures in recommended

proportions as per IS: 9103 to accelerate / retard

setting of concrete, to improve durability and

workability without impairing strength; including

pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of

centering, shuttering, finishing and reinforcement

as per direction of the engineer-in-charge; for the

following grades of concrete Note: Extra cement

up to 10% of the minimum specified cement

content in design mix shall be payable separately.

In case the cement content in design mix is more

than 110% of the specified minimum cement

content, the contractor shall have discretion to

either re-design the mix or bear the cost of extra

cement. Concrete of M25 grade with minimum

content of 330 kg /cum

5 Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-

Centering and shuttering including strutting,

6 propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for

Walls (any thickness) including attached pilasters,

(ii) 5.9.2 butteresses, plinth and string courses etc. 144 Sqm 819.7525 118044.36

Say (In Lacs): 15.29 -

Digitally signed by JAYA