REPAIRS TO GALVALUME SHEET, CEILING, WALL PLASTERING AND TILING AT ZONE B AT ZAKHAMA MIL STN.

Amount

Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and as directed.

Material and labour for Timber framed and fixed clean sawn 2nd class hard-wood in scantling fixed complete all as specified and as directed.

Supply and fixing 4 mm thick,Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work complete all as specified and as directed.

Supply and fixing 4 mm thick,Plywood, grade BWR, type BB, fixed with nails to timber frame work on walls complete all as specified and as directed.

Supply and fixing 4mm thick, non asbestos fibre cement building board fixed to the Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified complete all as specified and as directed.

Dismantling timber scantling unframed works in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm, in any position complete all as specified and as directed.

Material and labour well seasoned 2nd class hard wood plain fillets, square, rectangular in section, clean sawn secured with nails or brads, sectional area exc. 13 but not exc. 25 Sqcm complete all as specified and as directed.

Material and labour well seasoned 2nd class hard wood bull nosed, splayed, chamfered or rounded on one edge or face in section, clean sawn secured with nails or brads, sectional area exc. 6 but not exc. 13 Sqcm complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and as directed.

Supply and fixing Galvanised, corrugated mild steel sheeting of 0.63mm thick with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.

Fixing only Galvanised, corrugated mild steel sheeting of 0.63mm thick with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. complete all as specified and as directed. Note: Serviceable Sheets obtained from dismantling of Sheets vide serial item No 11 shall be reused as fixing only.

Supply and fixing plain galvanised mild steel sheeting of 0.63mm thick in ridges, hips, valley gutters, drips and straight flashings with grade of zinc coating 275 complete all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed.

Supply & fixing in repairs PVC (SWR) valley gutter, in any length with rubber ring loints, fixed to walls of 150mm bore complete all as specified and directed.

Supply & fixing in repairs 150 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls complete all as specified and directed.

Supply and fixing 150 mm bore PVC (SWR) bends complete all as specified and directed.

Supply & fixing 150 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal, jointing with solvent cement complete all as specified and as directed.

Supply & fixing Stack clamps made out of 50 X 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia pipes complete all as specified and as directed.

Material and labour for two coats of Varnishing on new wooden surfaces or wooden based surfaces of any description over a coat of wood filler liquied transparent, over 10cm width or girth including preparation of the surfaces complete all as specified and as directed.

Material and labour for one coat of Varnishing on old wooden surfaces or wooden based surfaces of any description, over 10cm width or girth including necessary cleaning & preparation of the surfaces complete all as specified and as directed.

Material and labour for preparation of new zinc (or galvanised) surfaces to receive painting over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over a coat of mordant solution complete all as specified and directed.

Material and labour for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including raking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 10mm thick rendering in CM (1:6) on brick work or concrete surface as on wall finished the surface even and fair complete all as specified and directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of Cement Based paint over a coat of Alkali Resistant Primer complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over a coat of Primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).

Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18sqm as in skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match the shade of tiles over and including rendering of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).

Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.18 sqm but not exc 0.38sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).

Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.18 sqm but not exc 0.38sqm as in skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match the shade of tiles over and including rendering of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).

thepfuralie zutso (BID ID -3103475)

Shri Atoshe Tuccu (BID ID -3099838)