REPAIR AND MAINT AND CERTAIN MISC REPAIRS TO DRAINS, PATH, CULVERTS, BOUNDARY WALLS, FENCING, GATES GARBAGES PITS ETC AT ZONE E-1, E-2 AND G OF AGE BR-II UNDER GE (EAST) LUCKNOW

Amount

Taking down cement plaster on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc but lime plaster any description complete all as specified and directed

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed

M&L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.

M&L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius in half brick thick wall, old size brick built in cement mortar 1:4 complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on other than fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and directed

M&L for applying 3 coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer on new plastered surfaces of walls including preparation of surfaces all as specified and directed.

Dismantling floor, hearth wall tiling /stone slab/brick tiling /interlocking tiling etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and directed

S&F 60 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block any shape and size of M-35 grade of approved shade laid over 50mm thick sand cushion and filled with fine sand complete all as specified and directed.

M&L for heavy duty exterior tiles of size 300 x 300 x 10 mm laid over 15 mm thick screed bed in CM 1:6, jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile complete all as specified and directed.

M&L for 20 mm thick granite for (of any type) machine cut and polished in steps, jambs, pillar window cill, cooking plateform etc laid over 20 mm thick screed bed in CM 1:4 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for hard core broken bricks of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregates as in path finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.

Supply only glass dividing strips, 3mm thick and 38 mm wide complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in floor finish rough and even comoplete all as specified and directed.

Forming contraction (Dummy) joints 65mm deep x 10mm wide,filled with grade 'A' sealing compound complete all as specified and directed.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in foundations, footings, plinth beams; bases for columns, etc.complete all as specified and directed

M&L for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in column, pillars, piers, posts and struts etc complete all as specified and directed

M&L for formwork to sides of concrete in foundations, footings, bases of columns, sides and soffits (if any) plinth beams, and similar work complete all as specified and directed

M&L for formwork to sides of concrete of pillars, posts, struts, piers, columns etc complete all as specified and directed

M&L for TMT bars 10 mm dia and over for reinforcement steel cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 5 mm dia and over up to 10 mm dia reinforcement steel cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed

M&L for mild steel framed structural work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe-410-0 (Gde-E-250) complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed

M&L for cement concrete type C2 1:3:6 (40 mm graded stone aggregate) in surface channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in man hole/drain cover slabs and set in CM (1:4) complete all as specified and directed.

S&F 150 mm dia reinforced concrte pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for concrete bed to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2 complete all as specified and directed.

M&L for 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in gate, wall etc complete all as specified and directed.

Dismantling fencing post of any size and any description complete all as specified and directed

Dismantling of chain link fencing of any description complete all as specified and directed.

Excavation in post hole (or similar hole) each not exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundations filling and mass concrete filling, etc complete all as specified and directed.

S&F for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repair galvanised two strand steel barbed wire with 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts including, securing or tying at crossing with and provision of galvanised mild steel wire, staplesor steel pins, etc. complete all as specified and as directed .

Supply only chain link MS galvanized fencing of any size and any type as approved complete all as specified and directed

Fixing only chain link fencing including line wires, any mess, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires, complete all as specified and directed

M&L for PCC/RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces including preparation of surface complete all as specified and directed.

Dismantling of trellis work (Jafri)/RCC jali complete all as specified and directed

M&L for providing precast cement concrete type B-O using 12.5 mm graded stone aggregate louvres and jallies set in CM 1:4, 35mm thick (measured solid), including all moulding but excluding frame complete all as specifed and as directed.

QUALITY CONSTRUCTIONS CO

M/S Reliance Construction