Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹19 L
Closing Date
4 Sept 2023, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Visvesvaraya Technological University
Jayappa
Repair & Maintenance works for C1 & C2 category Residential Quarters at VTU, Jnana Sangama, Belagavi.
VTU/2023-24/OW/WORK_INDENT14
VTU/2023-24/OW/WORK_INDENT14
Open
Other Works
Two Tender Document System(Two Cover)
Visvesvaraya Technological University Belgaum
10 documents required · 10 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily completed in last five years at least one single similar Civil work of value not less than Rs. 95.03 Lakhs contract for Central/State Government /Quasi Government Department.
Executed the following minimum quantities of items of works in any one year as mentioned in the bid document.
Liquid assets and /or availability of credit facilities of no less than Rs. 57.02 Lakhs .
Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction/ Electrical/ Water supply/Sanitary works only) of Rs. 380.10 Lakhs.
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
₹5,000
₹19 L
18 Aug 2023
18 Aug 2023
5 Sept 2023
1 Sept 2023
1 Sept 2023
Repair & Maintenance works for C1 & C2 category Residential Quarters at VTU, Jnana Sangama, Belagavi.
C1 QTRS - 24 Nos (2 BHK) -Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and...
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces -Two coats with paint of approved quality to give...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90 ltr/10 m square over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufac...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade -Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickn...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Removing of existing dammaged laminate from the door shutter and fixing 1mm thick laminate for the existing flush door shutter with on neccessary adhesive the coost including labour transportation et...
Providing & fixing Factory made single extruded Wood Polymer Composite (WPC) solid door/window,clerestory windnws & frames /chowkhat of frame size 65 x 150mm
Providing & fixing Factory made 100% carpenter friendly ready to use Single Solid Plain Wood Polymer Composite (WPC) flush shutter of 30mm thickness which is anti termite and having high water absorpt...
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.
Providing and fixing High Quality Designer Heavy Unique Latest Stainless Steel Aldrop approved quality with necessary screws etc. complete
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5 mm (heavy type)
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
Flooring with 25mm thick polished shahabad slabs using cement mortar 1is to 6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed w...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1is to 6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slur...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1is to 4 (1 cement - 4 coarse sand...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1 is to 4 (1 cement 4 fine sand) to brick masonry including rounding off c...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS 15622, of approved make, in all colours, shades, ex...
Providing and fixing of 25 MM dia SS Curtain Rod with SS plated Brackets fixed with Curtain Holders and necessary Screws etc including , cost of materials, labour complete as per specifications and a...
Providing and Supplying and fixing sliding door shutter with aluminum channel section with sliding rails of size 2.1 m height using 19mm Plywood and finsihed with 1.00mm thick external and internal s...
Providing and fixing of Aluminum frame of 63.5mm x 38.1mm,2 mm Thick with Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm for the Ventilaters to prevent rats ...
Providing & fixing of louvered ventilator with exhaust fan made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elast...
Providing & fixing of 2 - track x 2 - panel sliding windows made out of multi chambered UPVC (Matching to RAL - 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic...
Repairs to existing aluminium partition,Windows including glass,board, lock, handle, beading,gasket, mesh etc cost of all material,labour, complete as per specifications.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as ...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25 m...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings completeFlexible pipe 40 mm dia
Providing and supplying testingWATERTEC PVC Plastic Pillar Tap, WhiteCommissioning of approved complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved Angle Cock complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved 40 MM SS Waste Coupling complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved PVC Ball Valve complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved 2 feet long water inlet pipe complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved 7.5CMS To 15.00 cms dia PVC NP Grating 100mm dia complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved Wall Mounted Modern Over Head Shower With Arm (L) material type ABS plus SS polished having dimension of 38.1L x 12.7W Cms complete as per spe...
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.
Providing and supplying testing Commissioning of approved jaguar Tap Spindle included components like Screw for Handle/Lever Fitting, Jaquar Type Tap Spindle complete as per specification and directi...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Thickness above 40 mm up to 75 mm
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1is to 3 fixed and finsihed in line as per direction of Engineer in charge. (The cos...
Supplying PVC ringtite pipes conforming to IS 4985 is to 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
C2 QTRS - 24 Nos (1 BHK) :Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and...
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces Two coats with paint of approved quality to give ...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m square over an under coat of primer applied @ 0.80 ltr/10 m square of approved brand and man...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded High Density Polyethlene Membrane (HDPE) of 1.2mm composite thickn...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Removing of existing dammaged laminate from the door shutter and fixing 1mm thick laminate for the existing flush door shutter with on neccessary adhesive the coost including labour transportation et...
Providing & fixing Factory made single extruded Wood Polymer Composite (WPC) solid door/window,clerestory windnws & frames /chowkhat of frame size 65 x 150mm
Providing & fixing Factory made 100% carpenter friendly ready to use Single Solid Plain Wood Polymer Composite (WPC) flush shutter of 30mm thickness which is anti termite and having high water absorpt...
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.
Providing and fixing High Quality Designer Heavy Unique Latest Stainless Steel Aldrop approved quality with necessary screws etc. complete
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5 mm (heavy type)
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1 is to 6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slu...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 is to 4 (1 cement 4 coarse sand...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1 is to 4 (1 cement: 4 fine sand) to brick masonry including rounding off...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS 15622, of approved make, in all colours, shades, ex...
Providing and fixing of 25 MM dia SS Curtain Rod with SS plated Brackets fixed with Curtain Holders and necessary Screws etc including , cost of materials, labour complete as per specifications and a...
Providing and Supplying and fixing sliding door shutter with aluminum channel section with sliding rails of size 2.1 m height using 19mm Plywood and finsihed with 1.00mm thick external and internal s...
Providing and fixing of Aluminum frame of 63.5mm x 38.1mm,2 mm Thick with Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm for the Ventilaters to prevent rats ...
Providing & fixing of louvered ventilator with exhaust fan made out of multi chambered UPVC (Matching to RAL - 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic ...
Providing & fixing of 2 - track x 2 - panel sliding windows made out of multi chambered UPVC (Matching to RAL- 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic ...
Repairs to existing aluminium partition,Windows including glass,board, lock, handle, beading,gasket, mesh etc cost of all material,labour, complete as per specifications.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as ...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25 m...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings completeFlexible pipe 40 mm dia.
Providing and supplying testingWATERTEC PVC Plastic Pillar Tap, WhiteCommissioning of approved complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved Angle Cock complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved 40 MM SS Waste Coupling complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved PVC Ball Valve complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved 2 feet long water inlet pipe complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved 7.5CMS To 15.00 cms dia PVC NP Grating 100mm dia complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved Wall Mounted Modern Over Head Shower With Arm (L) material type ABS plus SS polished having dimension of 38.1L x 12.7W Cms complete as per spe...
Providing and supplying testing Commissioning of approved Wall Mounted Long Body bib cock With wall flange material type Chrome Finish complete as per specification and direction of EIC.
Providing and supplying testing Commissioning of approved jaguar Tap Spindle included components like Screw for Handle/Lever Fitting, Jaquar Type Tap Spindle complete as per specification and directi...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Thickness above 40 mm up to 75 mm
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1 is to 3 fixed and finsihed in line as per direction of Engineer in charge. (The co...
Supplying PVC ringtite pipes conforming to IS 4985 is to 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
PART-B ELECTRICAL WORK: Supplying heavy gauge PVC conduit pipe 20 dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plu...
Supplying heavy gauge PVC conduit pipe 25 dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceilin...
Supplying and fixing of 25 mm PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm etc. as required. Make Modi/Pre...
Supplying and fixing of 50 mm PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. Make Mod...
Supplying GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF s...
Supplying GI flexible conduit pipe 50 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF s...
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of wiring with specified IS...
2.5 Sqmm copper wire
4.0 Sqmm copper wire
Supplying and flush mounting unbreakable PVC mouldar box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. Make ...
4 Way PVC modular box
8 Way PVC modular box
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
4 Module switch mounting polycarbonate plate
8 Module switch mounting polycarbonate plate
Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 Make Anchor Woods/Crabtree/...
6 Amps 3 way socket.
Stepped Fan Regulator Two Module
16 Amps one way switch
6/16 Amps Universal Socket
Supplying and fixing 32 amps HRC fuse units base on existing switch /panel board. Make Indo Asian/Standard/Havells
Supplying and fixing 63 amps HRC fuse units base on existing switch /panel board. Make Indo Asian/Standard/Havells
Supplying and fixing 32 amps HRC fuse link on existing switch fuse base with W loss as per IS-13703. Make Indo Asian/Standard/Havells
Supplying and fixing 63 amps HRC fuse link on existing switch fuse base with W loss as per IS-13703. Make Indo Asian/Standard/Havells
Supply and fixing of 63 amps 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947...
Supplying, fixing and wiring 32 amps 4 pole Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board. Make Legrand/Havells
Supplying, fixing and wiring 63 amps 4 pole Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board. Make Legrand/Havells
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden
Current Transformer Class 0.5 accuracy with Tape Wound. Make Kalppa or as approved
Supplying and fixing of LED type panel board indicating
lamp with required colour suitable for 230/440VAC. 50 Hz
12/24V D.C. Make As approved
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. Make Legrand/Havells
Supplying of 12 inch Sweep (300 mm) 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. Make Almorand/Bajaj/Usha/Havells
Supplying 25 litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool b...
Supplying and fixing/replacement of 2 KW heating element for geyser. Make Bajaj/Crompron Greaves/Havells/V-Guard
Supplying and fixing/replacement of pressure relief valve suitable for Geyser. Make Bajaj/Crompron Greaves/Havells/V-Guard
Supply of round surface mounted rolling type LED Down light with 6 Watt GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit ...
Supply of round/square recess/surface mounted rolling type LED Down light with 12 Watt GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has s...
Supplying of 2 feet - PVC Batten with integrated LED tube 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input 220-240V @ 50...
Supplying of 4 feet - PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input 220-240V @ 5...
Supply of LED Post Top Lantern with 25 W LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glar...
Supply of 70 watt LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection mould...
Supply of 120 watt LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moul...
Supplying and fixing Single bracket 1.5 m. Length telescopic M.S. bracket fabricated by using 0.5m length 4 inch dia telescopic M. S. pipe, with 2 inch dia1.5m long M.S.Bracket and are welded with su...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13 is to 8130-1984 and...
Supplying & fixing of retrofit type - LED bulb 5W 6500 K with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life gr...
Supplying and fixing of T8 36/40W Fluorescent Tube with 36W power consumption with initial lumen of 2750 (3000 deg K / 4000 deg K) with rated avg life of greater than 10000 hrs. Operating voltage rang...
Supplying and fixing of 1 x 36/40 W Electronic Ballast suitable for T8 Lamp with housing made of Pre-coated steel/PC, Operating voltage range from 180V to 265V. 50Hz AC power Supply flicker free warm ...
Supplying & Fixing of 230 V 20/40 W starter for fluorescent Lamp Make As approved
Supplying and fixing one of 230 V Musical bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Make As approved
Supplying and fixing/replacing upto 4 mfd condenser for ceiling fan. Make As approved
Rewinding a ... mm ceiling fan/pedestrial after using necessary gauge annealed and insulated copper wire with necessary insulating, separators vibration arresting shellac, etc including replacement of...
Supplying of 7-Step Foldable Aluminium Ladder with five years warranty. This ladder should be built using rust-proof, high-grade aluminium and precision engineered HDPE components to ensure maximum co...
Supplying of Basic Digital Multimeter with follwoing specifications - Voltage Range (AC) 600V, Voltage Range (DC) 600V, Resistance Range (Ohm) 40MOmega, Frequency Range (Hz) 100kHz, Make Fluke/Meco/
Supplying of Digital AC Clamp Meter 400 A 600 V with Jaw Opening Size 30 mm, Voltage Accuracy (DC) 1.0 % plus or minus 5 Digits, Voltage Range (AC) 0-600 V, Current Range (AC) 0-400 A, Power 2 AA B...
Supplying of Digital AC Clamp Meter 1000 A 600 V with Jaw Opening Size 30 mm, Voltage Accuracy (DC) 1.0 % plus or minus 5 Digits, Voltage Range (AC) 0-600 V, Current Range (AC) 0-400 A, Power 2 AA ...
Supplying of self-adhesive PVC electrical insulation tape - 1.70cm x 6.5m x 0.125mm, Black, 6.5 m. Make Anchor streel grip (80 nos of each colour i.e. Red/Yellow/Blue/Black/Green
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-4 (2).pdf
Tender Document • 2.84 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .