GE(S) BTD 36 OF 20-21 REPAIR MAINT OF WOODEN AND STEEL CHAIRS AND CHARPOY NEWAR PLYWOOD TOP AT BATHINDA MIL STN UNDER GE (S) BATHINDA

Amount

Preparation of old painted iron & steel surface of Chair CB Steel with Arms (FD-75M) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Chair CB Steel with Arms shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface of Chair CB Steel without Arms (FD-75M) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Chair CB Steel without Arms shall be french polished with high gloss finish.

Preparation of old painted iron & steel surface of Chair Verandah Offrs (FD/E6/MAP/11) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Chair writing Map (FD/E6/MAP/12) by scraping & rubbing down with sand paper, removing dents and scratches, if any filing the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Chair computer MAP/chair revolving by scraping & rubbing down with sand paper, removing dents and scratches, if any filing the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. (Drg No.FD/E6/MAP/01,TP)

M&L to repair chair CB steel with arms by replacing the following parts with first class teak wood/approved ones. Rest all as per the drawings and as directed.

Seat/back having 30mm thickness and 50mm width of rail (duly caned with approved quality of cane and as per godrej pattern)

S&F new MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat.

Handle made out of first class teak wood.

Re-caning seat / back.

S&F PVC shoe of approved quality and suitable size.

M&L to repair chair CB steel without arms by replacing the following parts first class teak wood/approved ones. Rest all as per the drawings and as directed.

Seat/back having 30mm thickness and 50mm width of rail (duly caned with approved quality of cane and as per godrej pattern)

S&F new MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat.

Re-caning seat / back.

S&F PVC shoe of approved quality and suitable size.

M&L for preparation of old steel surface of chair verandah and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.6 thick plastic cane made out of virgin plastic, in existing pattern complete.Rest all as specified and directed by engr-in-charge. ( Drg No. FD-359/256/19 )

S&F PVC shoe suitable for chair verandah of approved quality.

M&L for preparation of old steel surface of chair verandah (Newar) and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and Rweaving of seat and back with virgin plastic newar of 50 to 55 mm vide closely woven through out complete all as specified and directed by Engr -in - Charge.Rest all as specified and directed by engr-in-charge. ( Drg No.256) Note :- Cost of virgin plastic newar shall not be 160/- per kg.

S&F PVC shoe suitable for chair verandah of approved quality.

M&L for preparation of old steel surface of chair verandah (MAP) and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and fixing PVC seat and back 4mm thick with wt not less than 1.85 kg and grooves 90x10mm 10 Nos on seat and back of approved quality. Rest all as specified and directed by engr-in-charge. ( Drg No. FD/MAP-II/06)

S&F of flat iron stiffener of size 25mmx5mm thick beneath the seat of chair verandah(MAP) of suitable lenth to support the seat of chair verandah(MAP) duly painted with two coats of synthetic enamel paint white colour(1st Gde quality) over a coat of Red oxide primer complete all as specified and directed

S&F PVC shoe suitable for chair verandah of approved quality.

Taking out u/s strips from Chair Verandah Offrs and S & F new strip of size 60mm wide x3mm thickness of appropriate length to chair verandha complete all as specified and directed by Engr -in - Charge. (Drg No.FD/E6/MAP/11)

M&L to repair chair writing MAP (made out of tapestry cloth) by replacing unserviceable parts as per drawing. Rest all as directed by engr-in-charg (Drg No.FD/E6/MAP/12)

Only tapestry cloth of seat and back complete.

Tapestry cloth and foam of seat/ back complete.

Only Plywood of seat /back.

Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of tapestry cloth shall not be less than 135/-per meter.

M&L repairs to Chair computer/chair revolving (made out of tapestry cloth) by replacing unserviceable parts as per drawings/TP. Rest all as directed by engr-in-charge. (Drg No.FD/E6/MAP/01,TP)

Only tapestry cloth of seat and back complete.

Tapestry cloth and foam of seat/ back complete.

Only Plywood of seat /back.

Hydraulic of suitable size.

Base PVC/Iron of suitable size and pattern.

Wheel of suitable size and pattern.

Arms as requred by size and design.

Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 135/-per meter.

M&L to repairs Chair dining by replacing the following unserviceable parts with first class teak wood/approved ones. Rest all as per drawing & as directed. (DRG NO. FD-1105/279/270/262/228/203)

Front leg.

Rear leg.

Stiffener.

back rest.

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Chair dining by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane.

M&L to repair Chair dining MAP by replacing the following unserviceable parts with first class teakwood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD/MAP-II/05 )

Front leg.

Rear leg.

Stiffener.

back rest.

S&F PVC shoe 15mm dia of approved quality.

PVC Seat 4x10mm thick RIBS moulded alongwith seat in single piece of approved quality.Make-Amko/Cello.

S&F teakwood stiffener of suitable size 20mmx20mm thick beneath PVC seat to support PVC seat.Rest all as directed by engr-in-charge.

M&L to repair Chair dining cushioned MAP by replacing the following unserviceable parts with first class teakwood/approved ones. Rest all as as per drawings and as directed. (Drg No FD/MAP-II/04,FD/E6/MAP/10(R))

Front leg.

Rear leg.

Stiffener.

Vertical strip.

Only tapestry cloth of seat complete.

Tapestry cloth and foam 75mm (40 D) of seat complete.

Only Plywood 12mm thick (9 ply) BWR gde.

S&F 'L' shape MS flat iron 15 mm x 3mm x100 mm long ( painted with 1st grade black colour syntetic enamel paint over a coat of red oxide primer) between leg and rail to tight the whole frame complete.

S&F PVC shoe 15mm dia of approved quality.

Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 250/-per meter.

M&L to repair Chair easy by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-229/201)

Frame front/back of seat

Frame side of seat.

Frame top/bottom of back.

Frame side of back.

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Chair easy by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane.

M&L to repair Chair writing by replacing the following unserviceable parts with first class teak wood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-280/250)

Front leg.

Rear leg.

Stiffener.

Back rest.

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Chair writing by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane.

M&L to repair Stool dressing cushion by replacing the following parts with first class teakwood/approved ones.Rest all as per drawing and as directed by Engineer-in-Charge. (DRG NO. FD/E6/MAP/14)

Only tapestry cloth of seat complete.

Tapestry cloth and Cushion75mm(40D) complete.

Plywood 12mm thick (9ply) BWR Gde.

Stiffener.

S&F PVC shoe 15mm dia of approved quality.

Note:-cost of tapestry cloth shall not be less than 250/-per meter.

Removing of U/S Plywood from Charpoy GI Pipe Plywood Top (FD-220) and S&F new Plywood 12mm thick ( 9 ply) of BWR Grade ISI Maked of Size 1990x915mm with Nut & Bolt as required. Rest all as specified and directed by Engr-in-Charge. Make of plywood shall be as per list of make attached in tender documents.

Welding of loose joint of flat Iron of charpoy GI pipe plywood top.

Tightening of complete frame & welding loose joint of GI pipe with frame of charpoy GI pipe plywood top.

M&L for preparation of old surface of flat iron (03 Nos) and painting the same with one coat of synthetic enamelled paint black colour (Ist grade quality) complete.

Removing of unserviceable plywood from Charpoy plywood top (MAP) (FD/MAP-II/01) and providing 12mm thick(9 ply) plywood BWR Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paint of approved shade complete. Rest all as per drawing & as directed by engr-in-chage.

Removing of unserviceable plywood from Charpoy folding (FD-388(R) and providing 9mm thick plywood BWR Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paint of approved shade complete. Rest all as per drawing & as directed by engr-in-chage.

M&L for preparation of old wooden polished surface of Chair dinning (FD-279/270/262/228/203) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair dinning MAP (FD/MAP-II/05) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair dinning cushioned MAP (FD/E6/MAP/10(R)/FD/MAP-II/04) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair Easy (FD-229/201) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair Writing (FD-280/250) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Stool dressing cushioned (FD/E6/MAP/14) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

SUNIL TRADERS

M/s MAKHAN ENTERPRISES

SK INDUSTRIES