Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹93,900Accepted-Finance | L1 | Accepted-Finance Being lowest bidder | |
| 2 | L1₹1.1 LAccepted-Finance BHAGWATI NAGAR JAMMU | L1 | Accepted-Finance Being lowest bidder | |
| 3 | L2₹2.1 LRejected-Finance | L2 | Rejected-Finance Not Being lowest bidder |
Tender Value
₹2.2 L
EMD Value
₹4,340
Closing Date
16 Nov 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer MID Jammu
Office of the Executive Engineer MID Jammu
Repair /rewinding of damaged Motor of pumping unit no-3 and repair/replacement of worn out parts of 5 cusec x 10m head pumping unit no.3 along with allied works at LIS Suhagani and Replacement of worn out parts of 5 cusec pumping unit no.1 along with
2022_IFC_193794_1
MID/J/e-NIT/2022-23/71
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
10 days
Suhagani and Batera
please refer terms and conditions
7 documents required · 7 mandatory
₹200
Executive Engineer MID Jammu
₹4,340
Yes
1 Dec 2022
27 Oct 2022
17 Nov 2022
27 Oct 2022
16 Nov 2022
9 Nov 2022
27 Oct 2022 - 16 Nov 2022
Repair /rewinding of damaged Motor of pumping unit no-3 of LIS Suhagani
Repair/rewinding of 30H.P motor of pumping unit no.3 by way of dismantling of the damaged & burnt electric motor of LIS Suhagani from base frame, pump & starter electrical connections. Carriage and shifting of the motor by using manual head load to nearest road & loading in the vehicle for further transportation to workshop for repairs/rewinding. Back carriage to site after repairs and reinstallation of motor, testing on idle load and full load conditions. Dismantling of the damaged 30HP Motor at workshop for extraction of burnt/damaged windings, cleaning of stator slots and complete rewinding of the motor with new copper wires of requisite gauge and specifications, standard make. Providing/ fitting of new insulation, packing material, then varnishing with superior quality varnish & drying in oven in controlled temperature. Repairs to rotor of motor by providing/fitting of new bearings (DE & NDE) after rebuilding of the rotor shaft and finishing to bearing sizes, making new keyway for coupling, providing/fitting of bearing end cover plates. Complete greasing of the bearing. Complete job includes cost of material and labour charges with hiring charges of tools & tackles. The firm should quote rates including rebate on old copper scrap.
Rebate on Old Parts
Repair/replacement of worn out parts of 5 cusec x 10m head pumping unit no.3 along with allied works at LIS Suhagani
Decoupling of 5cusec x 10m head horizontal casing pump of unit no.3 at LIS Suhagani from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 5cusec pump set by using manual labour, head load to the nearest roadside, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5 Cusec horizontal casing pump set at workshop by way of dismantling and extraction of damaged internal parts. Repairs to the pump shaft by way of rebuilding, turning, rethreading & finishing to accurate size as per specifications of damaged pump shaft. Providing & fitting of new impeller in place of damaged one as per sample and fitting of the same on the pump shaft. Providing and fitting of 2no.s new bearings on driving and non driving end of the pump as per sample, 1no. neck ring, 1 no. shaft protection sleeve, 1no. new check nut, bushes, new gland set & studs, rubber gasket and also applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement. Repair to the bearing housing on driving and non-driving ends of pumping unit by turning and fitting of bush to make inner dia. of bearing housing suitable for fitment of bearings. Repairs to Coupling set by way of welding, machining of bore, resizing of coupling bolt holes by welding and drilling to proper size.Complete assembling of pump set after carrying out necessary repairs. Shifting back to the LIS Suhagani after carrying out necessary repairs at workshop and then fitting/reinstallation at the base frame, coupling with the motor by making proper alignment and testing on partial/full load. Job also includes providing and fitting of new coupling nuts/bolts & rubber bushes. Complete job includes cost of material and labour charges. Repair to 1no. 250mm dia. foot valve of unit no.3 LIS Suhagani. Job includes extraction of foot valves from their installed position inside the Nallah by means of cutting of damaged/rusted/worn out nut bolts using gas cutter and then lifting of foot valve on head load using manual labour and shifting the extracted foot valve to nearest working area using manual labour on head load. Job includes complete dismantling of foot valve at site and extraction of parts for assessment of damages and then providing/fitting of new flapper pin, leather gaskets and repairs to existing flapper plate and intermediate spacer plate. Providing/fitting of new nuts and bolts and repairs to CI strainer and then re-assembling of all parts of foot valve and then shifting of foot valve back to its installed position by means of manual labour using head load and then re-fixing the foot valve on the suction side of the pumping machinery by providing/fitting of new set of nuts and bolts of appropriate size. Complete job includes cost of skilled/semi-skilled labour. Repair to rusted damaged portion of base frame of pumping unit no.2 .the job involves gas welding of base frame by skilled worker. Proper support should be given to base frame to reduce the unwanted noise and vibration of pumping unit no.2. welding should be done at all the weakest portion of base frame. Alignment of delivery side with pumping unit no.2 should be done to reduce the excessive load of vibration on the unit. Job includes cost of welding set and skilled worker
Rebate on Old Parts
Replacement of worn out parts of 5 cusec pumping unit no.1 along with allied works at LIS Batera
Decoupling of 5 cusec x 24m head HC pump of unit no.1 at LIS Batera from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 05 cusec HC pump set, using manual labour, head load to nearest road side, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5 Cusec HC pump set at workshop by way of dismantling and extraction of damaged internal parts. Job includes providing/fitting of new shaft sleeve and new pump shaft by turning, aligning, threading at ends and making of new keyways and its proper adjustment. Repair to the impeller by way of welding/brazing, machining, making key ways slots on the impeller and fitting of the same on the pump shaft. Providing and fitting of bush, new gland ring, gland set, gland studs, rubber gasket, new bearings as per sample, repair of bearing housing, new studs/bolts on it, applying sufficient amount of grease and M. oil to avoid excessive wear and tear, gland packing as per requirement, Complete reassembling of pump set after carrying out necessary repairs. Shifting back to the LIS Batera and then fitting/reinstallation at the base frame, coupling with the motor by making proper alignment and testing on partial/full load. Providing and fitting of new coupling set along with new nuts, bolts and rubber bushes. Repair to rotor of motor by providing/fitting of new bearings (DE & NDE) after rebuilding of the rotor shaft and finishing to bearing size, making new keyway for coupling, providing/fitting of bearing end cover plates. Varnishing the motor winding of electric motor to insulate the winding from contaminant, to make the winding rigid and tight and to dissipate heat.Complete greasing of the bearing, providing/fitting of cooling fan. Back carriage to site after repairs and reinstallation of motor and Testing on idle and load conditions. Complete job includes cost of material including rebate on old scrap and labour charges with hiring charges of tools & tackles. Repairs to 60HP Manually Operated Oil immersed star-delta motor starter of Unit-5 of LIS Batera. Job includes dismantling of starter from its installed position after disconnecting all electrical connections on input as well as output side and then carriage of the starter to workshop for repairs/replacement of intermediate Bakelite rod, moving and fixed copper contact points, no volt coil, thimbles, overload protection relay and then back carriage to LIS for re-installation, commissioning and testing on no load and full load conditions. Job also includes providing and filling of approx.7 litres of fresh transformer oil in the tank after complete de-moisturizing. Complete job includes cost of material, skilled labour charges, tools and tackles charges and carriage charges.
Rebate on Old Parts
M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS
SMART TECH AND CO
SMART TECH AND CO
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .