Road Safety Work of Tikaitganj Bajgahani Sitapur Border Road (ODR) Km. 12.00 to 15.00 in Distt. Barabanki.

6M Span over head Cantilever Structure with 300 dia M S one vertical post Supply, fixing & eraction of built up Cantilever Structure & m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class MS. pipe and 40 mm da heavy MS pipe as bracing & 10 inm MS plate at bottom for foxing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work indudes construction of RCC Foundation of size 0.00x0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:3:8 cement coante sand and 40 mm gauge stone ballast and RCC-M25 grade concrete No including supply and fuing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete Installation work shall be as per relevant clauses of MORTSH specification section 800 and IRC 67 2012 complete in all respect, The Rates shall include cost of design fabrication, supply. transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes etc. all T&P machine material and labour required for proper completion of work as per direction of Engineer-in-charge. (SOR Lucknow 26 MoRTH - 802)

Ratro-Reflective Shesting type (V with 4 mm thick ACM Double Side Providing & fiding of reflective signs with a corrosion resistant 4 mun thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be hily covered with High Intensity prismatic sheating type IV as por IFRC-67:2012 rotra reflective sheeting with back frame MS angle of 35x35x5 men Legends, letters, numerals and borders sto shindd be as per MoRTH specification No-801.3.7 The sheeting shall have a pressure-sensitive adhesive of the aggressive tack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended try the sheeling manufacturer. The ACM (Aluminiurn Composte Materials) shalt be fired on the Back frame MS Angle with riveling Micro prismatic types IV Retre reflective sheeting confirming to ASTM D4056-00 shall te Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection daytime colour and luminance, shinkage, flexibility, Iner removal, adhesion, impact resistance, specular glass and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from Intamational/Government Som Laboratory institute by the manufacturer of the sheeting and in case the certificate is obtained from international nondition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Aternatively, a certificate conforming to ASTIA Specification (0) 4050-00) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a siluation, the Employer/Client, f so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting lender. The rate shall include all materials, labour, TSP, transportation, Installation and Incidentals all complete as per direction of the Engineer-in-Charge. (SOR Lucknow 26 MoRTH - 801)

Road Marking with Hot Appiled Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface, Providing and laying of hot applied thermoplastic compound 2.5 mm thick including refectorising glass beads 250 gms par som area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35-2015 The finished surface to be level, uniform and free from streaks and holes. (SOR Lucknow 26 MoRTH - 803 (8.13))

Road Delinator Delineator Supply & Fixing of MS Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should be conceated so that there should not be any exposed surface without powder coating: Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shalt have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mid steel Guide Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtaini clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from intemational condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTIM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally, in such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include aa materials, labour, T&P. transportation, Installation and incidentals all complete as per direction of the Engineer-in-Charge

Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM Road Stud shalt be moulded from ASA (Acrylic Styrene Acrylonlarita) or HIPS (High-Amoact Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shal support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses containing single or dust prismatic cubes capable of providing total intermal reflection of the light antring the lens face. Lenses shall be mouled of methyl methacrylate conforming to ASTM D788 of equivalent. The stop or retro-reflacting surface shall preferably be 35+/-5 degree lo base and the area of each retro-reflecting surface shall not be less than 13.00 sq.com, the marker height shall not be less than 10 mm and shalt not exceed 20 mm & Width shall not exceed 130 num. The base of the marker shall be flat within 1.3 min all road studs shall be lagibly marked with the name, trade or other means of identification of the manufacture, spoxy installations, excess adhesive around the edge of the markar, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submil a two year warranty for satisfactory field performance including stipulated retro-raflectance of the reflecting panel, to the Engineer In addition.a two year warranty for satisfactory infleid performance of the finished road marker shall also be given by The contractor who cares out the work of flaxing of reflective road markers in case the markers are displaced, damaged, get wom out or lose their reflectivity compared to stipulated standards the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour, TAP, Iransportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. RPM (with shank) Edge line in Abadi & Carve.

Tree Plate Supply & Fixing of Retra reflective Tree Plate having size 15cm x15cm, consisting Type XI Retro reflective Sheeting fixed Over 1,50 mm thick aluminium sheel including labour, Material T&P etc for proper completion of the work. The rate shat include all materials, labour. T&P, transportation, No installation and incidentata all complete as per direction of the Engineer-in-Charge