GE/U(N)-74/2020-21 SPL REPAIR TO BLDG NO NP-20 AND NP-30 AND SPL REPAIR TO TOILET BLOCKS OF BLDG NO NP33 INCLUDING ADDTN ALTN TO BLDG NO NP 04 UNDER AGE B/R-I OF GE (NORTH) UDHAMPUR

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15 cm thickness (below or above ground level).

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and as directed by the Engr-in-charge.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and as directed. .

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing and rubbish off the premises complete all as specified and as directed by the Engr-in-charge.

Dismantling of plain or corrugated Asbestos sheets of any thickness or any description in roof coverings complete all as specified and as directed by the Engr-in-charge.

Excavation in trenches in hard/dense soil not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in any type of soil, complete all as specified and directed by the Engr-in-charge.

Excavating in post holes(or similar holes)in hard/dense soil each n exc 0.5 cu.m getting out, returning, filling in and remming with broken rubble around, in layer n.exc 25cm, watering and removing surplus soil to a distence n.exc 50m and making good surface

Removing excavated materials n exc 50m and depositing where directed at a level n exc 1.5m above the starting point in soils, complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by the Engr-in-charge.

Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, using old size bricks, built in cement mortar 1:6 , complete all as specified and as directed. .

All as per item No above herein before, but except bricks complete all as specified and as directed by the Engr-in-charge. Note-Old bricks obtained against dismantling shall be used.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified.

Pre-painted coloured profiled Galvalume/ Zincalume sheet 0.50mm thick TCT of grading YS-550, coating class AZ-150, class-3 confirming to IS-15965-2012, pitch profile c/c n.exc 203mm & crest of profile not less than 28.5mm as in roof covering/cladding to wall fixed with self taping screws/fastners with EPDM seals including gap filling between sheet and wall with PCC (1:3:6) as per site requirement complete all as specified and directed by Engineer-in-Charge”

“------Ditto--------as per Item above here-in-before but crimp ridge profile sheet as in eaves, gutter,ridge etc complete all as specified

Everest Fibre Cement Designer tile Ivory/white painted false ceiling with (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 595mmx595mm and any one of the design (occeanic , lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of powder coated steel sections consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet and cross T of size 15x32mm made of 0.30mm sheet spaced between main T at 600mm c/c from a grid of 600x600mm and wall angle of size 15x20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers grils, light suspended from ceiling using GI soffit cleats fixed to existing rafters, purlin etc with dash fastners GI adjustable rods of 3mm dia wit galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black model pre-painted with polyester paint and having a load bearingcapacity of 12 kg/sqm and refixed all existing electric wiring and fixture all complete at all heights as per direction of Engr-in-charge.

Providing plain cement concrete 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregates as in cills, steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneelers, apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engr-in-charge..

Anti skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor etc, set and jointed and laid with spacers and pointed with epoxy and pointed in colour tile grout including screed bed or bedding layer of mortar 10mm thk for laying floor finishes in CM(1:4) complete all as specified

For Coloured glazed ceramic coloured tiles 600mmX300mm 9 & 10mm thick on vertical surfaces of walls as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and fair to recive tiles as in skirting/dado etc complete all specified

25 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in flooring as in subbase and finished even and smooth.

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed by the Engr-in-charge.

50 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in flooring as in flooring and finished cement concrete surface even and smooth without using extra cement complete all as specified and as directed by the Engr-in-charge.

38mm wide Glass dividing strips, 3mm thick and inserted in position to confirm design as per directed by Engr-in-Charge.

Water proofing treatment to the sunken portion area with 15-20mm thick polymer modified plaster as per manufacturer instructions in specific layers, curing the surface after 72 hours and final finished with 12mm thick (1:3) cement sand plaster bottom sides of each sunken portion including mixed with WPC and provision of hole & fixed 500mm long 40mm dia spout in each WC complete all as specified and as directed by the Engr-in-charge. Note :- The Sunken shall be tested for leakage/seepage by filling water for at least 72 hrs. I case any seepage/leakage observed the sunken shall be rectified by the contractor without any cost.

Squatt pattern including cement concrete bedding , size 580 x 440mm including PVC (SWR) 'P or s trap front and back inlet and with internal foot rests (excluding flushing cistern ) including connector pices of PVC (SWR) Pipe as per required upto T /Y joint. complete all as specified and as directed by the Engr-in-charge.

In reapir Wash down water closet (Pedestal pattern), complete with Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.including Seat and cover for pedestal pan . complete all as specified and as directed by the Engr-in-charge.

PVC low level flushing cistern of capacity 10 ltr. white with inlet, ball valve, float and handle including breckets, suitable flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipes. CERA cat part No. 2602 P (Camelia), or equilvent of any approved make as approved by GE.

In repairs wash basins, vitreous china(flat back or angle back type) size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling 32mm and pvc waste pipe 32mm bore complete all as specified CERA cat part No. 1008 (Cornet) for WHB & for pedestal Cat Part No 1108, Jaquar SLS-WHT-0611 F for WHB and SLS-WHT-1510 foe pedestal or equilvent of any approved make as approved by GE.

Oval under counter wash basins, size 560x470mm vitreous china fixed in RCC slab including CP waste coupling 32mm and CP brass Bottle trap 32mm bore including 32mm HDPE pipe bend fixed to wall etc as in waste pipe and 300mm long complete all as specified and as directed by the Engr-in-charge.

Chromium plated, 15mm WHB Mixer, heavy duty fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and as directed by the Engr-in-charge.

Stainless steel soap tray as per sample fixed with wooden gutties and screws to wall surfaces complete all as specified and as directed by the Engr-in-charge.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. complete all as specified and as directed by the Engr-in-charge.

PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by the Engr-in-charge.

In repairs Health faucet CP Brass with 8mm dia ,1 mtr long flexible tube with wall hook complete all as specified. complete all as specified and as directed by the Engr-in-charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or removal to store (measured overall as fixed along the centre line over fitting and accessories).

PVC (SWR) pipes of bore 110mm single socketed in any length with rubber ring joints fixed to walls with stack clapms and fixed with nut and bolts complete all as specified.

PVC (SWR) pipes of bore 110mm single socketed in any length with rubber ring joints laid in floors complete all as specified.

PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints fixed to walls with stack clapms and fixed with nut and bolts complete all as specified.

PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints laid in floors complete all as specified.

PVC (SWR) branch piece, single (single Y)/T equal or unequal with access door of any radius 110mm bore complete all as specified and as directed by the Engr-in-charge.

PVC (SWR) bends with access door any radius of bore 110 mm complete all as specified and as directed by the Engr-in-charge.

PVC (SWR) bends with access door any radius of bore 75 mm complete all as specified and as directed by the Engr-in-charge.

PVC (SWR) branch piece, single (single Y)/T equal or unequal with access door of any radius 75mm bore complete all as specified and as directed by the Engr-in-charge.

Red/Black granite(of any type)stone slab 16mm thick machine cut as in window cill/counter top slab bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edg complete Including 10mm thick backing coat CM 1:4 complete all as specified and as directed by Engr-in-Charge.

Dismantling water tanks and removing to store exc 250 litre but n exc 500 litre with all necessary fittings complete all as specified.

3 layer rotational moulded polyethylene water storage tanks white colour 2000 ltr Capacity (Cylindrical vertical with closed top) with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part I complete all as specified & as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site to store bore of pipe 15mm complete all as specified and as directed by the Engr-in-charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site to store bore of pipe 20mm complete all as specified and as directed by the Engr-in-charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site to store bore of pipe 25mm complete all as specified and as directed by the Engr-in-charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site to store bore of pipe 32mm complete all as specified and as directed by the Engr-in-charge.

Tubes , medium grade of bore size 15 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

Tubes , medium grade of bore size 20 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

Tubes , medium grade of bore size 25 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

Tubes , medium grade of bore size 32 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

In replacement bib taps long body 15mm chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including elbow/socket etc as required at site all as specified and directed by Engr-in - Charge

Bib taps long body 15mm chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including elbow/socket etc as required at site all as specified and directed by Engr-in - Charge

CP shower with arm 15mm size 195mm long with bend of 45 degree with flange including taking down the existing UNSV shower of any type/shapecomplete all as specified and as directed by the Engr-in-charge.

Angle cock 15mm chromium plated fittings as required at site all as specified and directed by Engr-in-Charge.

Concealed stop valve chromium plated brass fancy type screwed down high pressure with crutch or butterfly handle dia 15mm screwed both ends for iron pipe or for unions and fixed including fittings as required at site,all as and directed by the Engr-in-charge.

In replacement gun metal,globe or gate valves of size 20 mm dia with iron wheel head,screwed both ends for iron pipes including fittings as required at site and taking down the existing unserviceable, all as specified and directed by Engr-in-Charge.

Gun metal,globe or gate valves of size 25 mm dia with iron wheel head,screwed both ends for iron pipes including fittings as required at site and taking down the existing unserviceable, all as specified and directed by Engr-in-Charge.

Gun metal,globe or gate valves of size 32 mm dia with iron wheel head,screwed both ends for iron pipes including fittings as required at site and taking down the existing unserviceable, all as specified and directed by Engr-in-Charge.

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and as directed by the Engr-in-charge.

15 mm thick rendering in cement mortor 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed by the Engr-in-charge. . NOTE Scapfolding arrangement as per site requirement upto 2nd floor complete all as specified

10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.complete all as specified and as directed by the Engr-in-charge.

5mm thick rendering on fair faces of brick /concrete on ceiling surface in cement mortar 1:4 and finished even and smooth without using extra cement. complete all as specified and as directed by the Engr-in-charge.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of priming over 1mm thick of wall care putty complate all as specified and as directed.

Preparation of new wall plastered surfaces of wall and applying three coat of white wash/colour wash on wall, complete all as specified .

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over chalk whitening including scapfolding arrangement as per site requirement upto 2nd floor complete all as specified

Preparation of new plastered surfaces of wall and applying two coat of cement base paint over one coat of primer , complete all as specified and directed by Engr-in Charge ..

Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over one coat of primer , including 1mm thick wall care putty complete all as specified and directed by Engr-in Charge ..

Complete removal of existing treatment on old decorated surfaces of wall plasteres or unplastered by washing ,rubbing down and stopping of distempred and painted surfaces and applying two coats of oil bound distemper over a coat of primer on wall applying 1 mm thick of wall care putty completed all as specified and directed by Engr-in charge .Note Wall care putty shall be applyed in two coat and each coat shall be rubbed and smoothhen by suitable emery/sand paper complete all as specified and as directed by the Engr-in-charge.

Preparation of old or previously painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, for roof truss, purlins,steel gates etc. Upto 15m height complete all as specified.

Preparation of preprimed steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-charge.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n exc 15 cm in width or girth; including cutting to edges, all mi- tres and stopped ends, etc complete all as specified and as directed by the Engr-in-charge.

Preparation of newly plastered surfaces of walls and applying two coats of weather proof acrylic emulsion Apex paint over one coat of exterior primer over 1mm thick external wall care putty including scapfolding arrangement as per site requirement upto 2nd floor complete all as specified

Preparation of plastered or unplastered old surfaces of walls,chajja,balcony,facia etc by brooming down or steel wire brushing, scraping down smoke soots ,moulds ,moss efforescent salls,treating oil and greasy spots etc, and applying one coat of cement base paint , complete all as specified .

Ball Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15mm dia, cast copper alloy with Swan Neck, chromium plated, screwed down high pressure, with ‘Hot’ and ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe.complete all as specified and as directed by the Engr-in-charge.

Taking down chowkhat with shutter n exc 1.5 sqm each and refixing in same opening after completion tiling work complete all as specified.

Taking down chowkats or frames of any type or description (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete.

Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed by the Engr-in-charge.

Solid PVC door frame of wallnut colour of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per specification and drawings complete all as specified and as directed by the Engr-in-charge.

Factory Made Solid PVC Moulded Door Shutter of wallnut colour , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (Hung/sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, powder coated aluminium Deco grill DG 202 pattrn with apperture of size 60x45mm securing with suitable aluminium channel to frame, Stainless steel mosquito proof wire cloth of stainless 0.36mm dia and 1.4mm aperture fixed with aluminium flat/channel and screws and Glazing with 5mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified as directed by Engr-In-Charge.

Powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (Hung/sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-In-Charge.

Powder coated aluminium Deco grill DG 202 pattrn with apperture of size 60x45mm securing with suitable aluminium channel to frame complete all as specified as directed by Engr-In-Charge.

Stainless steel mosquito proof wire cloth of stainless 0.36mm dia and 1.4mm aperture fixed with aluminium flat/channel and screws all as specified as directed by Engr-In-Charge.

Glazing with 5mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified and as directed. Notye : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item above here in before but without glazing bar complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid for separately

Aluminium powder coated towerbolt 100mm long complete all as specified.

Aluminium powder coated Handle 100mm long complete all as specified.

Aluminium powder coated tHInges 75mm long complete all as specified.

Powder coated Hinges 125mm long match with door shutter withnscrew complete all as specified.

Powder coated Aluminium Towerbolt 150mm long match with door shutter withnscrew complete all as specified.

Powder coated Aluminium Handle 200mm long match with door shutter withnscrew complete all as specified.

4.00 mm thick sheet figured glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-charge.

Roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3.50 Kg/ sqm including 10mm thick plastering in CM (1:3) finished even and smooth mixed with water proofing compound and the sand used for the same will be clean and free from any silt, organic matter and impurities. RCC and plastered surface will be wet cured for minimum period laid down in IS 456 & then allowed to dry and leakage checked by pointed test atleast 72 hrs. After checking of leakages on dry surfaces applying bituminous primer on roof surfaces @ 0.40 kgs/sqm on plastered surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen confirming to IS-702 @ 1.20 kg/sqm on the surface provided APP (Atactic Polypropylene polymer) modified polymeric five layered membrane with central core 100 micron high molecular high density film. Minimum weight of membrane will be 3.00kg /sqm. APP membrane will be laid across the slope from lowest line slopping roof towards ridge with minimum end lap of 150mm & side lap of 75mm bonded with hot blown bitumen. Over the membrane apply semi hot blown 85/25 penetration grade bitumen 1.2kg/sqm and blinded with fine sand in dry condition 0.5kg/sqm dusted over the bitumen coat and applying two coats of Aluminium paint over a coat of primer complete all as specified. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.

Supply only water proofing compund complete all as specified and as directed by the Engr-in-charge.

200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engr-in-charge.

150 mm long aluminium bow handles, cast type, anodised and fixed complete all as specified and as directed by the Engr-in-charge.

300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by the Engr-in-charge.

S&F MS powder coated 450mm long Peg set with 06 Nos hooks long fixed with screw and plug complete all as specifed

Towel Rod CP Brass 20mm bore and 600mm long fixed with screw and plug complete all as specifed

Towel Ring CP Brass fixed with screw and plug complete all as specifed. complete all as specified and as directed by the Engr-in-charge.

Looking Mirror of size 600mm X 450mm X 5mm thick with Plywood commercial type fixed on back side and wooden frame compete all as specified.

Dismantling loose/disintegrated portion of RCC chajjas, bends shelves, beams balconies and similar work at any position or any height and dubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrisove paint on exposed surfaced and provision of necessary support form work and including 10mm thick plastering in CM 1:4 finished fair and even completed all as specifed.

75 mm bore PVC(SWR) multi floor trap with stainless steel grating including jointing to waste pipe fixed in cement with solvent cement, including taking down old PVC or CI floor trap of any type complete all as specified.

Plain cement concrete type D-2, 1:3:6 using (40mm graded stone aggregate) as in foundation, filling ans mass concrete all as specified and directed by Engineer-in-Charge.

Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed by Engineer-in-Charge.

Reinforced cement concrete slab 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) (Nominal Mix) as in slabs supported on wall, beams etc or similar works, complete all as specified and directed by Engr-in-Charge.

TMT steel bars 8 mm dia as in refinforcement, cut to length, bend to shape required including craniing, bending spirally or hooping for coloumns, hooking ends and binding with MS wire (annealed not less than 0.9mm) all as specified and as directed by Engr-in-charge.

TMT steel bars 10 mm dia and over as in refinforcement, cut to length, bend to shape required including craniing, bending spirally or hooping for coloumns, hooking ends and binding with MS wire (annealed not less than 0.9mm) all as specified and as directed by Engr-in-charge.

Use and waste form work to side and soffits of subpended slab such as roof slab floor slab landing and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished surface of concrete flat, complete all as specified and as directed by Engr-in-charge.

Mild steel framed work such as Iron door , grills, gratings, angles, chequred plates, plain plates etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladders; framed balusters; railing;frame work for water tanks, gates, grills and similar work conforming to Fe 290.Gde-E-165, all as specified .

Steel work in tubular trusses medium weight including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Chequered plates and plain plastes of any thickness and distance pieces, MS Hollow sections, cleats etc conforming to Fe-410- W(Gde-E-250) quality- B complete all as specified and directed

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including distance pieces, cleats etc conforming to Fe-410- W(Gde-E-250) quality- B complete all as specified and directed

In repair for Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe ) but including CP brass urinal spreader with pvc connection 15mm size with PTMT nuts of length 450mm and HDPE waste pipe of 32mm bore and CP waste Coupling complete all as specified

50mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 including necessary fittings sockets/bends/reducers/Tee etc ffixed complete to walls, ceilings or in floors complete all as specified.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified

150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.

Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) concrete bed to 150 mm bore drain pipes including forming cradles after they are laid and tested all as specified

Pre-cast RCC 1 : 2 : 4, type B-1 (using 20 mm graded stone aggregate) in cover slabs for man holes including MS handle, with plain faces finished fair and smooth etc, set in CM 1 : 6 complete all as specified

Taking down carefully the existing Copper/Aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturb surface of walls, floors etc., complete all as specified and directed by Engr -in- charge. Note : (i) Old dismanteled wiring and accessories (other than reuse) will be contractors property and credit will be charged against schedule of credit.

One light/fan point wiring with 1.5 Sqmm single core multi stranded copper conductor FR-LSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FR-LSH insulated drawn into and including concealed PVC rigid conduit not less than 20.0 mm dia ISI marked terminated into modular white cover plate with frame(as per site required), modular metal flush box (as per site required) ISI marked, complete all as specified and as directed by the Engr-in-Charge. Note ;- (i) Necessary wall cutting/chasing for conduit/fixture will be done through electrical cutter machine only

All as per item Srl No.127 herein before but for 3 pin socket outlet 5 Amp on same board, complete all as specified and directed by Engr -in-charge.

All as per item No. 127 above but for one 5 Amps socket outlet on independent board.

All as per item No. 127 above but wire size 2x4 Sqmm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FR-LSH 1100 volts grade un sheathed single core stranded copper conductor cable of size 4 Sqmm.

Switch Piano, flush type, One way, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

Socket 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

Switch socket combination 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

Switch socket combination 5 / 15 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and directed by Engineer - in - Charge.

Repair of ceiling fan 1200mm sweep of any make obtained from above item, oiling, greasing cleaning slot, over hauling & replacement of defective nut bolts washer etc including painting all as specified and directed by Engr-in-charge.

Taking down exhaust fan cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed by engineer in charge.

Hanging /fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from above item

Stepped type, electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as required complete all as directed by Engineer- in - Charge.

Taking down and refixing any size exhaust fan and connecting up including painting with two coats of white synthetic enamal paint with the help of spray gun, greasings, overhauling after cleaning with soft solution complete and provision of cable from ceiling rose or connecter to fan all as specified and directed by Engineer- in - Charge.

Taking down geyser any capacity from poisition , replacing the worn out parts with new parts to make the geyser serviceable in aii respect and painting with two coats of white synthetic enamal paint with the help of spray gun including painting of MES No. / ser No. as existing and refixing in the same position and connecting with the suitable size of cable all as specified and directed by Engineer- in - Charge.

Stout Mini LED 20/18 Surface /Suspended and wall mounted LED batten, CRCA housing provided for efficient heat dissipation with polycarbonate diffuser & built-In electronic driver having THD<10%., P.F greater than 0.9, input voltage range from 90 Volts to 280Volts making all connection using 1.5sqmm copper conductor multistranded PVC insulated 2 core flexible cable with from ceiling rose to fitting complete all as specified and as directed by engineer in charge.Make Make : Havells Cat No: STOUTMINI1200BS20WLED865SPCWH or equalvent in above specifications of any MES approved make, sample as approved Accepting Officer.

Decorative ultra slim linear polycarbonate Extruded LED lighting fixture 10/12 Watt LED of input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 1080 lumens of IP 20 complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling rose to fitting complete all as per directed by Engr-in-charge. Havells: Cat No: LUMILINEPLUSBS10WLED865SPCSS or equalvent in above specifications of any MES approved make, sample as approved Accepting Officer.

LED Bulk head (6500K) fitting of 10/12 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by engineer in charge. /Havells: Cat No: RUGBYNEONFT10WLED860SSYMTOPC or equalvent in above specifications of any MES approved make, sample as approved Accepting Officer.

In replacement Venus Neo HE 42 Watt smart Plus Indoor Architectural LED Luminaires 2x2 LED, 6500K, luminaire of LED recessed panels comprising of inbuilt occupancy with photo sensor. The product has a self-learning feature and making all connection using 1.5sqmm copper conductor multistranded PVC insulated 2 core flexible cable, neccessary arrangement fixing to GI wire at roof and hanging light with GI wire suitable size from roof to fitting with nut, bolts etc. complete all as specified and as directed by engineer in charge. Make -Make of LED Havells - as per ordering code VENUSNEOHE2X2R42WLED840SMART PLUS or equalvent in above specifications of any MES approved make, sample as approved Accepting Officer.

LED street light fitting 20W new generation energy saving & environmental friendly long life versatile pressure die-cost aluminium IP66 with acrylic with heat resistant toughened glass, corrosion resislant complete making all connection with MCB SPN alongwith MCB Box enclosura, GI tubing light grade 25mm dia lenght 1.2 mtr, clamp, bolts, nuts and washers complete with testing all as specified and directed by engineer in charge MAKE equalvent in above specifications of any MES approved make, sample as approved Accepting Officer.

Taking down old unserviceable copper / aluminium submain wiring any type / size from existing old surface for further repair / replacement complete all as per directed by Engr-in-charge

Sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 25 mm dia PVC concealed conduit medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6sqmm and one run of 6 sqmm cable and one run of PVC conduit/ casing capping shall be measured as one RM

In repair sheet metal enclosure double door single pole and neutral 240 Volts for DB's when MCBs to be used 8 way with 200 amp rated bus bar with IP-43 protection complete all as per directed by Engr-in-charge

Connection and testing 'C' series SPN MCB 40 to 63 Amp 240V, 50Hz, 10kA for lighting and other domesitc loads incl necessary copper lugs etc all as specified and as directed by engineer in charge.

Connection and testing MCB SPN 32-63 Amp, 240 Volts, 'C' series, breaking capacity 10 KA of rating 32-63Amps complete all as per directed by Engr-in-charge

Connection and testing MCB SP32-63 Amps C series, breaking capacity 10 KA of rating 6-32Amps complete all as per directed by Engr-in-charge

Supply and fixing, connection and testing 'C' series MCB SP6-32 Amps.complete all as per directed by Engr-in-charge

Plug and socket DBs, single pole and neutral enclosure with a two pin earth plug and socket with one single DP20 Amps, 240 volts MCB complete all as per directed by Engr-in-charge

In replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core in trenches/floor/pole/GI pipe complete including cuttingof bituminous road/chasing to any surface and making good to the disturbed surface to match the existing.

Dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt all as spec complete all as per directed by Engr-in-charge

GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia complete all as per directed by Engr-in-charge

Earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 4.0mm dia lead wire 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1).

SHIVAE CONSTRUCTION

MADAN LAL SHARMA AND SONS

kerni electricals

DURGA CONSTRUCTION CO

jyoti parkash sharma

TULSI RAINA AND SONS