REPAIRING, REPAINTING OF VARIOUS STEEL FURNITURE, RECANNING OF CHAIRS VARANDAH AND CHARPOY GI PIPE 12 MM PLY TOP AT MILITARY STATION JAISALMER UNDER GE (A) JAISALMER

Amount

Almirah Large Steel (FD-67(M) , FD-1031, FD-1033, FD/E6/MAP/18)

M&L for removing of old broken/ unserviceabble shelves from Almirah large steel and S&F new shelves made out of 1mm thick MS sheet bent to shape all as specified in drg & directed by Engineer-in-charge.

M&L for replacement of broken/ dacayed legs from existing Almirah Large steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engineer-in-charge

M&L for removing of old unserviceable locking device three way from existing Almirah Large steel and S&F new locking device made out of 10 mm MS bar round and 3 mm MS plate all as per site requirement and directed by Engineer-in-charge

M&L for removing of broken/ unserviceable handle with bush from existing almirah large steel and S&F new Chromium plated steel handle with bush all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old unserviceable lock from existing almirah large steel and S&F new lock all as specified in drg & directed by Engr-charge

S&F new cleats made out of 2 mm thick sheet bend to shape and shall be fixed with nut & bolt to give support to shelves all as specified in drg & directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint OG/smoke gray to internal /external surface & shelves completely after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required to Almirah Large steel all as specified in drg & directed by Engineer-in-charge.

Almirah Small Steel (FD-1032, FD-1034)

All as per item Ser No 1.01 above but shelves for Almirah small steel.

All as per item Ser No 1.02 above but legs for Almirah small steel.

All as per item Ser No 1.03 above but locking devide for Almirah small steel.

All as per item Ser No 1.04 above but handle for Almirah Small Steel.

All as per item Ser No 1.05 above but lock for Almirah small steel

All as per item Ser No 1.06 above but cleats for Almirah small steel.

All as per item Ser No 1.07 above but painting to Almirah small steel.

Locker Bed Side Steel (FD-1029)

M/L for removing of old unserviceable hasp and stapple from existing Locker bed side steel and S&F new CP hasp and stapple of size 100 x 40 x 3 mm as specified in drg and directed by Engineer-in-charge

M&L for removing of old unserviceable handle from existing Locker bed side steel and S&F new CP handle 100 mm long as specified in drg and directed by Engineer-in-charge

M & L for removing of old unserviceable hanging pipe from existing Locker bed side steel and S&F new 20 mm dia CP steel conduit pipe with 02 Nos socket as specified in drg and directed by Engineer-in-charge

M&L for removing of broken/dacayed legs from existing Locker Bed Side steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engineer-in-charge

M&L for one coat of synthetic enamal paint OG/smoke gray to internal /external surface & shelves completely after preparation of old painted surfaces by filling with putty , cleaning with sand paper and applying primer where ever required to Locker bed side steel all as specified & directed by Engineer-in-charge.

Book Case Steel (FD-1028)

Removing of old broken/ unserviceabble shelves from Book Case steel and S&F new shelves made out of 1mm thick MS sheet bent to shape all as specified in drg & directed by Engineer-in-charge.

M&L for replacement of broken/dacayed legs from exsiting Book Case steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engineer-in-charge

Removing of broken/unserviceable handle from existing Book Case steel and S&F new Chromium Plated steel handle 100 mm long all as specified in drg & directed by Engineer-in-charge.

Removing of old unserviceable lock from exsiting Book Case steel and S&F new lock all as specified in drg & directed by Engr-charge

Removing of old unserviceable Glass shutter from exsiting Book Case steel and S&F new Glass shutter all as specified in drg & directed by Engr-charge

Removing of old unserviceable Glass pane from exsiting Book Case steel and S&F new Glass pane 3mm thick all as specified in drg & directed by Engr-charge

M&L for one coat of synthetic enamal paint OG to internal /external surface & shelves completely after preparation of old painted surfaces by filling with puttu, cleaning with sand paper and applying primer where ever required to Book Case steel all as specified & directed by Engineer-in-charge.

Table Office Clerk Steel {FD-84(M) & FD-1004}

M&L for removing old u/s tops from Table office clk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4mm thick teak wood beading all around, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of unserviceable drawers from existing table office clk steel and S & F new drawers made out 1 mm thick MS sheet bend to shape all as specified in drg & directed by Engineer-in-charge.

Removing of old unserviceable lock from existing table office clk steel and S&F new lock all as specified in drg & directed by Engineer-in-charge..

M&L for one coat of synthetic enamal paint OG to all steel Surface after preparation of old painted surfaces by filling with purrty, cleaning with sand paper and applying primer where ever required to Table office clk steel all as specified & directed by Engineer-in-charge.

Table Office Officer Steel {FD-84(M) & FD-1003}

All as per item Ser No 5.01 above but Top of Table office Offr steel.

All as per item Ser No 5.02 above but drawers of Table office Offr steel.

M&L for removing of unserviceable shutter of side unit from existing table office officer steel and S & F new shutter for side unit made out 1 mm thick MS sheet bend to shape all as specified in drg & directed by Engineer-in-charge.

All as per item Ser No 5.03 above but Lock of Table office Offr steel

All as per item Ser No 5.04 above but painting to Table office Offr steel

Table 900x600x760mm steel with and without drawer (FD-1007 & FD-1008)

M&L for removing old u/s tops from Table steel 900x600x760mm and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4 mm thick teak wood beading fixed with fevicol all around, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of existing unserviceable front/rear top rail /bottom middle stiffener of Table steel 900x600x760mm with/without drawer and S&F new front/rear top rail/bottom middle stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable top side rails/bottom side stiffener of table steel 900 x 600 x 760mm with/without drawer and S&F new top side rails/bottom side stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable legs of table steel 900x600x760 with/without drawer and S&F new legs made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of unserviceable drawers from existing table steel 900x600x760 with drawer and S&F new drawer made out of 1 mm thick MS sheet bend to shap as specified in drg and as directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint OG to steel surface to Table steel 900x600x760mm with/without drawer after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Table 900 x 900 x 760mm steel (FD-1009)

M&L for Removing old u/s tops from Table steel 900 x 900 x 760mm and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4 mm thick teak wood beading fixed with fevicol all around, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of unserviceable top rails from Table steel 900 x 900 x 760mm and S&F new top rail made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of unserviceable legs form table steel 900 x 900 x 760mm and S&F new legs made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint OG to steel surface to Table steel 900 x 900 x 760mm after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Table Dining ORs {FD-165(M)}

M&L for removing of old u/s top of Table Dining OR and S&F new top made out of 18mm thick block board with 22 gauge aluminim sheet, all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of unserviceable front/rear top rail/bottom middle stiffener of table Dining ORs and S&F new front/rear top rail/bottom middle stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of unserviceable top side rails/bottom side stiffener of table Dining ORs and S&F new top side rails/bottom side stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of unserviceable legs of table Dining ORs and S&F new legs made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint black to table dining OR after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Teapoy Varandah (FD/E6/MAP/17 & FD-255, FD-383)

M & L for removing old u/s tops from Teapoy varandah and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4mm thick teak wood beading fixed with fevicol all around, all as specified in drg & as directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint Black/white to Teapoy Varandah after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Table computer (FD/E6/MAP/03)

M & L for removing old u/s tops from Table Computer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4mm thick teak wood beading fixed with fevicol all around, all as specified in drg & as directed by Engineer-in-charge.

M & L for removing of unservicesable key board tray (450 x 480mm) fitted with telescopic channel from existing table computer and S&F new key board tray fitted with telescopic channel all as specified in drg and directed by Engineer-in-charge.

M & L for removing of unservicesable pull out tray fitted with telescopic channel from existing table computer and S&F new pull out tray fitted with telescopic channel all as specified in drg and directed by Engineer-in-charge.

S & F L type hard steel joints

S & F 25 x 50mm Rectangular PVC Corner

Chair CBA Steel With Arms {FD-75 (M)}

M&L for removing of old/broken flat iron from existing Chair CBA steel with arms and S&F new flat iron 25 x 3 mm of required length shall be welded with seat of chair CBA Steel with arms complete all as specified and directed by Engineer-in-charge.

M&L for removing of U/S seat from existing Chair CBA steel with arms and S&F new seat made out of 2nd class hard wood teak (Well seasoned) duly black stove polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engineer-in-charge.

M&L for removing of U/S back rest from existing Chair CBA steel with arms and S&F new back rest made out of 2nd class hard wood (teak) (Well seasoned) duly black stove polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engineer-in-charge.

M& L for removing of U/S broken arms rest from existing Chair CBA steel with arms and S&F new arms rest made out of 1st class hard wood teak (Well seasoned) duly black stove polished fix with screw steel all as specified and directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint OG to Chair CBA steel with arms after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Chair CB Steel With Arms & Cushion {FD-444}

M&L for removing of U/S foam seat from existing Chair CBA steel with arms & Cushion and S&F new Cushion back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam all as specified and directed by Engineer-in-charge.

M&L for removing of U/S back rest from existing Chair CBA steel with arms & Cushion and S&F new back rest made S&F new Cushion back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam all as specified and directed by Engineer-in-charge.

M& L for removing of U/S broken arms rest from existing Chair CBA steel with arms & Cushion and S&F new arms rest made out of 1st class hard wood teak (Well seasoned) duly covered with cushion and leatherette fix with screw steel all as specified and directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint OG to Chair CBA steel with arms & Cushion after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Chair CB Steel Without Arms {FD-75 (M)}

All as per item ser No 12.01 above but flat iron for Chair CB steel without arms

All as per item ser No 12.02 above but seat of Chair CB steel without arms

All as per item ser No 12.03 above but back of Chair CB steel without arms

All as per item ser No 12.05 above but painting of Chair CB steel without arms

Chair CBA Special with hand rest {FD-120(M), FD-120(M)®}

M&L for removing of U/S seat from existing Chair CBA special steel with hand rest and S&F new seat made out of 2nd class hard wood teak (Well seasoned) duly french polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engineer-in-charge.

M&L for removing of U/S back rest from existing Chair CBA special steel with hand rest and S&F new back rest made out of 2nd class hard wood (teak) (Well seasoned) duly french polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engineer-in-charge.

M& L for removing of U/S broken arms from existing Chair CBA special steel with hand rest and S&F new arms made out of 1st class hard wood teak (Well seasoned) duly fresnch polished fix with screw steel all as specified and directed by Engineer-in-charge.

M& L for removing of U/S broken hand rest from existing Chair CBA special steel with hand rest and S&F new hand rest made out of 1st class hard wood palnk in one piece teak (Well seasoned) duly fresnch polished fix with screw steel all as specified and directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint OG to Chair CBA special steel with hand rest after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Chair School with hand board (FD/E6/MAP/05)

M&L for one coat of synthetic enamal paint black after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required and all as specified and directed by Engineer-in-charge.

M&L for removing of unserviceable one piece seat and back PVC of chair school with hand board and S&F new one piece seat and back PVC for char school with hand board all as specified and directed by Engineer-in-charge.

M&L for removing of unserviceable hand board of chair school with hand board and S&F new hand board made out of 18mm thick prelaminated particle board one side teak and otherside white with 4 mm thick teak wood beading fixed with fevicol all around for chair school with hand board all as specified and directed by Engineer-in-charge.

Chair Varandah (FD-256)

M&L for removing of wornout U/S cane/Nylon newar of chair varandah and one coat of synthetic enamal paint white after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified and directed by Engineer-in-charge.

M&L for recanning with new standared 3.5 mm wide white plastic cane of semi circular type in mat pattern and all as directed by Engineer-in-charge.

Chair Varandah Godrej (FD/E6/MAP/11)

M&L for one coat of synthetic enamal paint black after preparation of old painted surfaces by applying sand paper and primer where ever required and all as specified and directed by Engineer-in-charge.

M&L for removing of old/broken flat iron from existing Chair Verandah steel and S&F new flat iron 38 x 3 mm of required length shall be welded with seat/Back of chair verandah Steel complete all as specified and directed by Engineer-in-charge.

Bed Hard steel with Ply Wood Top (FD/ E6/MAP/8®)

M&L for removing u/s headrest and S&F New headrest of 38 x 38 mm MS Sqr pipe, 18 x 18mm MS sqr pipe, 25 x 25 mm MS Sqr pipe and 18mm thick pre-laminated board complete all as specified in drg and directed by Engineer-in-charge.

All as per item No 19.01 above, but footrest, rest all as per drg and directed by Engineer-in-charge.

M&L for removing of u/s long rail and S&F of new new long rail made out of 25 x 65 mm MS Rect Pipe (18 gauge) all as specified in drg and directed by Engineer-in-charge.

M&L for removing of u/s support/Stiifner and S&F of new support made out of 25 x 25 mm MS Sqr pipe 18 gauge all as specified in drg and directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint black to Bed hard steel with plywood top after preparation of old painted surfaces by cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

M&L for removing of u/s ply wood from bed hard steel and S&F new ply wood of size 1980 x 900 mm 12 mm thick of BWR grade all as specified in drg and directed by Engineer-in-charge

Charpoy GI Ply top {FD-220 & FD-220 (R)}

M&L for removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI Pipe 32mm bore (ISI marked) medium grade incl threading both sides all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken short rail from Charpoy and making of short rail from old u/s long rail retervied from ser item No 18.01 above incl threading both side & fixing in charpoy GI Pipe all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken leg from charpoy and making leg from old u/s short rail retervied from ser item No 18.02 above incl threading, S&F 6mm MS plate in bottom and 25 x 3mm of MNF clamp (2 Nos each leg) to be welded with legs & fixing in charpoy GI Pipe all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old broken/damaged check nuts and S&F new check nuts of 32 mm dia heavy duty to Charpoy GI pipe all as specified in drg & directed by Engineer-in-charge

M&L for removing old broken/damaged GI elbow 3 way 32 mm bore and S&F new GI elbow 3 way 32mm bore (ISI marked) to Charpoy GI pipe all as specified in drg & directed by Engineer-in-charge.

M&L for tightening of loose charpoys after removing of US plywood from existing GI charpoy and S&F of New 12mm thick plywood, ISI Mark, BWR Grade of size 1980MM x 900MM by fixing with 8 nos nut and bolt of size 40 X 6 mm with GI washer all as specified & directed by Engineer-in-charge. Note : 1. All iron work viz FI shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer. 2. Teak wood beading 4mm thick half round moulded shall be provided alround the plywood top. 3. Cost of these factor shall deemed to be included in rate quoted above and nothing extra shall be payable on this account

Charpoy IP/MS with Hard top (FD/E6/MAP-II/01)

M&L for removing of damaged/broken long rail from charpoy MS hard top and S&F new long rail made out of MS pipe 65 x 25mm, 1.6mm thick (ISI marked) incl welding to existing charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken short rail from Charpoy MS Hard top and S&F new short rail made out of MS pipe 65 x 25, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken leg from charpoy MS Hard top and S&F legs made out of MS pipe 38 x 38, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for removing of old damaged/broken support/stiffener from charpoy MS Hard top and S&F new support/stiffener made out of MS pipe 25 x 25, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engineer-in-charge.

M&L for one coat of synthetic enamal paint black to charpoy MS Hard top after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

M&L removing of US plywood from existing charpoy MS Hard top and S & F New 12mm thick ply, ISI Mark, BWR Grade of size 1980 MM x 900MM by fixing with 10 nos nut and bolt of size 50 X 3 mm complete all as specified & directed by Engineer-in-charge.

Charpoy IP Folding ply top {FD-388 (R) }

M&L for one coat of synthetic enamal paint Black to all steel surface after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required to Charpoy IP folding ply top all as specified & directed by Engineer-in-charge.

M&L for removing of old u/s Ply Top and S&F new Ply Top of 1980 x 900, 12mm thick of BWR grade into two peaces and fixed with 10 Nos of nut & Bolt to Charpoy IP Folding Ply top all as specified & shown in drg

Table bed side MAP {FD/E6/MAP/15( R)}

M&L for removing of old broken side purlin of table bed side MAP and S&F new side purlin made out 18mm thick prelaminated particle board exterior grade (ISI marked). All as shown in drg and as directed by Engr-in Charge.

M&L for removing of old broken top of table bed side MAP and S&F new top made out 18mm thick prelaminated particle board exterior grade (ISI Marked) with 25 mm projection and PVC beading fixed to open sides. All as shown in drg and as directed by Engr-in Charge..

M&L for removing of old broken upper drawer of Table bed Side MAP and S&F new Upper drawer of tabler bed side MAP made out 18mm thick prelaminated particle board exterior grade (ISI Marked) , rest as shown in drg and directed by Engineer-in-charge.

M&L for removing of old broken Lower drawer of Table Bed Saide MAP and S&F new Lower drawer of tabler bed side MAP made out 18mm thick prelaminated particle board exterior grade (ISI Marked) , rest as shown in drg and directed by Engineer-in-charge.

M&L for removing of old U/s back side of Table Bed Saide MAP and S&F new Back side of tabler bed side MAP made out 12mm thick Ply wood BWR Grade (ISI Marked), rest as shown in drg and directed by Engineer-in-charge.

M&L for removing of old U/s MS tube frame of Table Bed Saide MAP and S&F new MS frame of tabler bed side MAP made out 18 x 18mm, 18 Gauge MS Square pipe, rest as shown in drg and directed by Engineer-in-charge.

Supply and fix copper oxidised steel Handle for Table Bed Side MAP. All as shown in drg and as directed by Engineer-in-charge.

Desk Stand Lacture (FD-1022)

M&L for removing of old unservicable wall pannel Left side/Right side and S&F new wall pannel of 12 mm thick Pre-lamited board all as specified & shown in drg.

M&L for removing of old unservicable wall pannel Front side and S&F new wall pannel of 12 mm thick Pre-lamited board all as specified & shown in drg.

M&L for removing of old unservicable Shelf and S&F new Shelf of 12 mm thick Pre-lamited board all as specified & shown in drg.

M&L for one coat of synthetic enamal paint black to steel portion of Desk Stand Lacture after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Form with back FD-78(M)

M&L for one coat of synthetic enamal paint Black to all steel surface after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required to Form with back all as specified & directed by Engineer-in-charge.

M&L for removing of old u/s top rail and S&F new top rail made out 25 x 25mm MS Square pipe and welded to frame of Form With back all as specified & shown in drg

M&L for removing of old u/s legs and S&F new legs made out 25 x 25mm MS Square pipe and welded to frame of Form With back all as specified & shown in drg

M&L for removing of old u/s stiffener long and S&F new stiffener long made out 25 x 25mm MS Square pipe and welded to frame of Form With back all as specified & shown in drg

M&L for removing of old u/s stiffener short and S&F new stiffener short made out 25 x 25mm MS Square pipe and welded to frame of Form With back all as specified & shown in drg

M&L for removing of old u/s seat and S&F new seat made out 2nd class hard wood planks (Sheesham) without crack and knots in one piece of size 1800x255x25 mm and fixing the same with GI Nuts & bolts to Form With back all as specified & shown in drg

M&L for removing of old u/s Back and S&F new Back made out 2nd class hard planks (Sheesham) without crack and knots in one piece of size 1800x150x19 mm and fixing the same with GI Nuts & bolts to Form With back all as specified & shown in drg

Form without back FD-1027

M&L for one coat of synthetic enamal paint Black to all steel surface after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required to Form with back all as specified & directed by Engineer-in-charge.

M&L for removing of old u/s legs and S&F new legs made out 25 x 25mm MS Square pipe and welded to frame of Form Without back all as specified & shown in drg

M&L for removing of old u/s stiffener long and S&F new stiffener long made out 25 x 25mm MS Square pipe and welded to frame of Form Without back all as specified & shown in drg

M&L for removing of old u/s stiffener short and S&F new stiffener short made out 25 x 25mm MS Square pipe and welded to frame of Form Without back all as specified & shown in drg

M&L for removing of old u/s seat and S&F new seat made out 2nd class hard wood planks (Sheesham) without crack and knots in one piece of size 1900x255x25 mm and fixing the same with GI Nuts & bolts to Form With back all as specified & shown in drg

Chair Writing ( FD/E6/MAP/12)

M&L for replacement of old u/s Side Arm and S&F of new Side Arm (PU material) and fixed to chair writing all as specified in drawing and directed by Engr -in-Charge

Removing old Cushion seat from the existing Chair writing and S&F new seat made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engineer-in-charge

Removing old Cushion Back from the existing Chair writing and S&F new back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engineer-in-charge

Table 1520 x 860 x 760mm (FD-1010)

M&L for removing old u/s tops from Table steel 1520 x 860 x 760mm and S&F new top made out of 18mm thick pre-laminated MDF Board Melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around , rest all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of existing unserviceable front/rear top rail /bottom middle stiffener of Table steel 1520 x 860 x 760mm and S&F new front/rear top rail/bottom middle stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable top side rails/bottom side stiffener of table steel 1520 x 860 x 760mm and S&F new top side rails/bottom side stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable legs of table steel 1520 x 860 x760 mm and S&F new legs made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for tightening and one coat of synthetic enamal paint OG to internal and external space of Table steel 1520 x 860 x 760mm after preparation of old painted surfaces by applying sand paper and filling with putty and primer where ever required all as specified & directed by Engineer-in-charge.

Table Conference (FD-1001)

M&L for removing old u/s tops from Table conference and S&F new top made out of 18mm thick pre-laminated MDF Board Melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around , rest all as specified in drg & as directed by Engineer-in-charge.

M&L for removing of existing unserviceable front/rear top rail /bottom middle stiffener of Table conference and S&F new front/rear top rail/bottom middle stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable top side rails/bottom side stiffener of table steel 1520 x 860 x 760mm and S&F new top side rails/bottom side stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for removing of existing unserviceable legs of table conference mm and S&F new legs made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engineer-in-charge.

M&L for tightening and one coat of synthetic enamal paint OG to internal and external space of Table conference after preparation of old painted surfaces by applying sand paper and filling with putty and primer where ever required all as specified & directed by Engineer-in-charge.

Rack 6 Tier Steel

M&L for tightening and one coat of synthetic enamal paint OG to internal and external space of rack 6 tier steel after preparation of old painted surfaces by applying sand paper and filling with putty and primer where ever required all as specified & directed by Engineer-in-charge.

Rack Side 3/4 space Steel

M&L for tightening and one coat of synthetic enamal paint OG to internal and external space of rack side 3/4 space steel after preparation of old painted surfaces by applying sand paper and filling with putty and primer where ever required all as specified & directed by Engineer-in-charge.

Rack Shoe steel

M&L for tightening and one coat of synthetic enamal paint Black to rack shoe steel after preparation of old painted surfaces by applying sand paper and filling with putty and primer where ever required all as specified & directed by Engineer-in-charge.

Trestle store room steel

M&L for one coat of synthetic enamal paint OG to Trestle store room steel after preparation of old painted surfaces by applying sand paper and filling with putty and primer where ever required all as specified & directed by Engineer-in-charge.

M&L for spot Welding of steel items of broken joints etc including scraping preparing surface of welded pertion by grinding and buffing to make fit for painting and applying two coatt of synthetic enamal paint of same shade.

M&L for removing old unserviceable hard rubber shoe from chair verandah and S&F new hard rubber shoe 20mm dia all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Chair school, Charpoy IP Folding, Rack Shoe Steel and S&F new hard rubber shoe 25mm dia all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Table Office Officer steel , Table office clerks steel, Table 900 x 600 x 760, table 900 x 900 x 760 and Table dining Ors, Form with/without back and S&F new hard rubber shoe 25 x 25mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Teapoy Varandah , table Bed Side MAP and Chair CBA special with hand rest S&F new hard rubber shoe 18 x 18mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Bed Hard Steel and S&F new hard rubber shoe 38 x 38mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Charpoy MS Hard Top and S&F new hard rubber shoe 32 x 32mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Chair CB Steel with/Without Arm and S&F new hard rubber shoe all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber cap from Chair CB Steel with/Without Arm and S&F new hard rubber cap all as as specified and shown in drawing

PRAFUL ENTERPRISES

B.S Constructions

SK INDUSTRIES

M/S NEHAL ENTERPRISES

M/s godara infratech and power industries

BHARAT CONSTRUCTION AND SERVICES

M/S CHANDER SHEKHAR