Supply and fixing of Mechanical Engineering Research Laboratory Furniture (Table) under RP-157 of New Academic Block

RESEARCH LAB, MECHANICAL ENGINEERING, SMVD UNIVERSITY KATRA

LABORATORY TABLE FOR CABIN - Supplying & placing of Lab benches with followings specifications with OVERALL SIZE: 2480Wx750Dx900Hmm: Lab made up of C-frame understructure. All sheet metal items shall be of CRCA sheet double skin pass, Thickness of Frame 0.8 mm Cabinets body (casing material CRCA Sheet Side Cover 0.8 mm, as per IS 513:1994. C-frame made of rectangular pipe with cross section of 60mm x 30mm & 1.6 mm thick with feet tolerance of -5mm to +20mm & skirting at bottom side. Horizontal members to connect C frame shall be made of rectangular pipes of CRCA MS 1.6 mm thick of pipe dimension 60 x 30 x 1.6 mm. Worktop should be 18mm (+/- 2mm) thick Black Granite worktop with exposed edges chamfered 4 mm thick Neoprene rubber at the bottom. All steel frame-work is should be pre-treated with superior epoxy powder coated finish. Lab Under Storage 600(W)mm x 530(D)mm x 675mm(H) Providing and fixing understorages of Size 600mm W x 530mm D x 674mm H should be supplied with1 Drawer & 2 Shutters . Doors should be assembled with Hinges made up of SS 304, Zero Crank hinge. Intermediate horizontal channels should be provided between door and drawer. Shelf should be bend panel with 20mm height. single piece drawer tray supported on LH and RH ball slide to be provided. Knee space panel shall be in 0.8 mm CRCA Sheet construction Thickness of storage unit LH/RH Panels, shutter front, bottom panel, Top front, drawer separator, alignement channel, Back panel, Shutter cover, Fr. Rack strip, top cover should be of 0.8 mm thick. Handle polypropylene Recessed-Type. Lock facility with 180° and 10 lever cam lock mechanism . Shutter should be of Double-type construction. Telescopy Channel : 450mm Length (required only for drawer unit). Shutter should have provision of roller catch. Lab Tables - Electric Trunking Providing , placing of Electrical Trunk Size - 230mm x86mm x90 mm Including 6 Module Plate. The electrical trunking used for electrical switches and sockets, its top panel, bottom panel of the trunking should be made from 1.0 mm thick CRCA MS panel. The front surface that houses the electrical points should have a slope. Dimensions Tolerance + 20 mm.

Supplying & placing of Lab benches with followings specifications with OVERALL SIZE: (8550x1800)Wx750Dx900Hmm: Lab made up of C-frame understructure. All sheet metal items shall be of CRCA sheet double skin pass, Thickness of Frame 0.8 mm Cabinets body (casing material CRCA Sheet Side Cover 0.8 mm, as per IS 513:1994. C-frame made of rectangular pipe with cross section of 60mm x 30mm & 1.6 mm thick with feet tolerance of -5mm to +20mm & skirting at bottom side. Horizontal members to connect C frame shall be made of rectangular pipes of CRCA MS 1.6 mm thick of pipe dimension 60 x 30 x 1.6 mm. Worktop should be 18mm (+/- 2mm) thick Black Granite worktop with exposed edges chamfered 4 mm thick Neoprene rubber at the bottom. All steel frame-work is should be pre-treated with superior epoxy powder coated finish. Lab Under Storage 600(W)mm x 530(D)mm x 675mm(H) Providing and fixing understorages of Size 600mm W x 530mm D x 674mm H should be supplied with1 Drawer & 2 Shutters . Doors should be assembled with Hinges made up of SS 304, Zero Crank hinge. Intermediate horizontal channels should be provided between door and drawer. Shelf should be bend panel with 20mm height. single piece drawer tray supported on LH and RH ball slide to be provided. Knee space panel shall be in 0.8 mm CRCA Sheet construction Thickness of storage unit LH/RH Panels, shutter front, bottom panel, Top front, drawer separator, alignement channel, Back panel, Shutter cover, Fr. Rack strip, top cover should be of 0.8 mm thick. Handle polypropylene Recessed-Type. Lock facility with 180° and 10 lever cam lock mechanism . Shutter should be of Double-type construction. Telescopy Channel : 450mm Length (required only for drawer unit). Shutter should have provision of roller catch. Lab - Sink Unit, Polypropylene Sink with 3-Way 360 Degree Revolving Water Faucet Providing and fixing Sink Units which shall comprises of Sink Unit, Polypropylene Sink with 3-Way 360 Degree Revolving Water Faucet as per following: Standard bowl size shall 600mm(L) x 400mm(W) x 300mm(D). Water faucet and valve bodies shall be cast red brass alloy or bronze forgings, all fittings shall be powder plated. PP knob to be used. All gasket and O-ring of Nitrile Rubber make. Inlet connection 1/2" BSP. Coating to be glossy epoxy fusion bond. The Faucet shall be fixed to the existing water outlet by providing PVC connection with brass unions of required length. Lab Tables - Electric Trunking Providing , placing of Electrical Trunk Size - 230mm x86mm x90 mm Including 6 Module Plate. The electrical trunking used for electrical switches and sockets, its top panel, bottom panel of the trunking should be made from 1.0 mm thick CRCA MS panel. The front surface that houses the electrical points should have a slope. Dimensions Tolerance + 20 mm.