TP1-08/2020-21

Amount

Labour charges Clearing light jungle including cost of all labour, lead, lift, etc., complete and as directed by the Department Engineer at site.

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for Hard Gravelly soil SS

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for SDR NOT REQUIRING BLASTING

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for MR & DMR NOT Requiring BLASTING

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for Hard rock Requiring BLASTING

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m around the building using BIFLEX-C termite 250ml for 10lit of water etc., complete.

Filling the river sand for filling in the foundation and floor including cost of sand, filling charges as per standard specification(watering & consolidation with all leads and lifts etc., complete.

PCC 1:3:6, using 20mm HBG metal foundation/padding including cost of cement, all materials, labour, lead, lift, etc. complete. For transformer plinth

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for column/footing concrete.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Grade Beam .

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for plinth Beam .

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Lintel.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Sun shade 600 mm and 1200 mm wide.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof beam.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof slab 125mm thick.

Refilling the excavated earth including all lead, lift etc, complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour, lead, lift, curing, etc., complete.

Providing steel reinforcement using steel of grade Fe 500 for RCC works including cost of steel, binding wire and placing in postion of the steel reinforcement, including cost of all materials, lead, lift, etc., complete.

Providing and laying weather proof Tiles300mmx300mm size over screed concrete 1:3:6 with average thickness of 25 mm for required gradient and using best quality of one course of weather proof tiles of approved quality using in cm 1:3, 12 mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials, transport curing etc complete.

Plastering with CM 1:3, 12mm thick for ceiling, beams, sunshade and for transformer plinth including cost of all materials, curing, labour, lead, lift, etc., complete.

Plastering with CM 1:5, 12mm thick for walls and cable duct including cost of all materials, curing, labour, lead, lift, etc., complete.

Floor finishing with CM 1:3, 20 mm thick over PCC 1:4:8 using 40 mm metal, 100 mm thick for store room including cost of cement, all materials, labour, lead, curing, lift, etc., complete and as directed by the Department Engineer at site.

Painting out side walls with two coats of best quality exterior emulsion over primer one coat and two coats of wall putty of approved colour including cost of all materials, etc., complete.

Painting the inside walls with two coats of best quality interior emulsion over primer one coat and two coats of wall putty of approved colour including cost of all materials, etc., complete.

White washing 2 coats using emulsion paint over one coat of primer with white colour for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete.

Supplying and fixing of anodized aluminium fully glazed door using 101.60 x44.45x2.10mm box section for outer frame, 53.70 x 44.50x2.30mm @1.238kg/m box door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 6mm clear glass including cost of alum clips rubber beedings alum fixtures such as tower bolt, pivot automatic hydroulic door closure brass mortice lock handle ok. Including cost of all materials, labour, leads, lift etc. complete. (1.20x2.40m size single leaf)

Supplying and fixing UPVC (Un-Plasticized Polyviny Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Fixed & Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The ventilators have provisions for fixing exhaust fan of suitable size. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Engineer-In-Charge before use on work.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. Solid panel PVC door with frame

Supplying and fixing at anodized aluminiumdoor using 101.60x44.45x2.10 mm @1.608 kg/m box section for outer frame. 53.70x44.45x2.30 @ 1.238 kg/m door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 9mm thick regular grade pre laminated particle board & top panel with 5.5mm thick clear glass including cost of alum. Clips rubber beedings alum. Fixtures such as tower bolt, pivot brass mortice lock handle,with hydralick Door closer etc. of approved quality including cost of all materials, labour, leads, lift etc. complete (1.00mx2.20msize single leaf)

Supplying and fixing in position of anodized Al. glazed sliding window of size 1.18 x 1.48m as per ISS 1038-1958 (1245 ISS) using Al. sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg/m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 4 mm tk plain glass including cost of all materials, lock arrangements labour, lead, lift, etc., complete.

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with approved ceramic tiles 305mmx305 mm non slipery over cement mortor 1:3 20mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete( sample to be approved by Dept.Engineer)

Dadooing walls with approved quality of Glazed tilEs of size 300x200 laid in cement mortor 1:2 10mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete( sample to be approved by Dept.Engineer)

Dadooing walls with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 8mm of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position IWC ORISSA PAN of size 580X420mm colour glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc., complete.

Supplying and fixing of colour Europian type water closet with flushing cistern of Neycer/Parry ware with P"" or "S" trap, seat cover 15 mm dia connecting hos. 2 nos 15 mm dia CP angle valve, hand shower -1 No. including cost of all materials, lead, lift, etc., complete as directed by department Engineer at site

Supplying and fixing in position 165 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete

Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing position CI Naini Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supply and fixing of white colour wash basin of size 550x400mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug and chain, 32 mm dia 'B' Class G.I. waste pipe etc., 15 mm dia GM wheel valve, 15 mm dia nylon connection, complete.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete. For 40mm dia PVC Pipe

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete.for 25 MM DIA PVC PIPE

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete.for 20 MM DIA PVC PIPE

Providing and fixing 12mm Chromium plated pillar tap for water supply with angle stand including cost of pipe and labour for fixing charges, lead, lift, etc. complete.

Supplying and fixing in position first quality and approved variety of Gun metal wheel valve with BIS make of 40mm Dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). the valves to be used on work shall be got approved by the Department Engineer

Supplying and fixing in position first quality and approved variety of Gun metal wheel valve with BIS make of 25mm Dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). the valves to be used on work shall be got approved by the Department Engineer

Supplying and fixing of GI angle size 50mmx50mmx6mm fixing at 600mm c/c for cable duct inside the control room including cost of all labour, lead, lift, etc., complete.

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.

Labour charges for writing Name Board/Slogans over the plastered surface wall in the control room including cost of paint & all materials, labour, lead, lift, etc. complete, as per standard specification.

Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12mm thick as per the requirement of Board including cost of all materials,aluminium letter, emblem, scaffolding etc. complete as directed by the engineer at site.

Fixing of bore well point by well qualified geologist, labour, T & P including all lead, lift, etc., complete as directed by the department engineer at site.

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Upto 100 Mts

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Beyond 100 Mts

Supply and erection of 180mm (7”) dia rigid PVC casing pipe, having 6kg/cm² including cost all materials,lead, lift, re-boring the holes to required depth etc., complete with cover at the top of the bore well.

Supply and erection of 5 HP ELGI compressor (or) any other reputed make of pump having ISI make with 3phase suguna (or) any other approved make 400V/440/50 cycle motor (5 HP) having ISI make (or) as approved by the Board Engineer at site with air pipe of 20mm dia to pump water to a height of 175mts.and delivery unit with foot valve v-belt arrangement including cost of all materials, labour, erection charges, 5 HP, 400/440V L&T make starter to suit the compressor including the cost of all materials, labour, lead and as per the instruction of Engineer in charge at site complete in all respects.

Supply and erection of 3 phase 30/32 Amps ICTP switch with fuse arrangements to suit the compressor with cost of all materials, labour, lead and lift etc., complete in all respects.

Supply and erection of 40mm dia HDPE hose in black colour having ISI mark and as per IS 4984 -84,40mm dia (10 Kg/CM²) in and outside of the bore well including cost of all materials, labour, lead,lift etc., complete.

Supply and erection of 20mm dia HDPE hose in black colour and havingISI mark and as per IS 4984 - 87, (15 Kg/CM²) in and outside of bore well including cost of all materials, labour, lead, lift etc., complete.

Supply and fixing of 15 Amps main fuse carrier in T.W.Board (600x600mm)with hings,screw, hook wall varnished including cost of all materials, lead, lift etc., complete in all respects.

Supply and laying of 12mm G.I. pipe of medium class for air compressor cost of G.I pipe, specials, cutting, threading, labour, lead, lift as per the instruction of Engineer in charge at site.

Labour charges for laying of 4 core 6 Sq mm power cable from nearest power point to 5 HP motor including earth work excavation ,laying power cable in the pit and top covered with country bricks and refilling with excavated earth, lead. lift ,etc. comp

Providing Anchor /Grip rod for foundation in the rock surface with drilling of 40 mm dia holes and fixing of 25 mm dia RTS rod 1.m length inside the holes and 1m length out side the holes with L shape bending including cost of all materials labou

Providing projected border 15 cm width, with cm 1:3, 20mm thick for plinth beam including cost of all materials, labour, load, lift etc. complete.

Providing projected border 7.5cm width in cm 1:3, 20mm thick at top of parapet wall, sunshade and control room inner walls including cost of cement all other materials, labour, lead, lift, etc. complete.

Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit, transformer oil drain pit including cost of metal, all labour, lead, lift, consolidation, etc.,complete.

Supply of S Type chair steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of Three drawer steel table with Sunmica top of size 1200x750x750mm by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of Steel side rack open type 1100x400x1200 by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of Steel half bench 1200x400x600mm by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of Revolving chair by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of Operator table 6'x5' by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of PVC armed chair of reputed make of approved quality by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F

Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated Multi strand unsheathed Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm Steel switch box for 5 A 3 pin non inter locking CS plug

Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work.

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only.B98

Supply and fixing of 18W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting(SD 88).

Supply and fixing of CFL bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for incandescent lamp with guard and 100 W bulb. (SD 81)

Supply and fixing of 4'40 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals

Supply and fixing of fancy glass shade and 11 W CFL for BH point.

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp.

Supply and fixing of 375 mm (15") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make]

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supplying and laying of 4 core 16 Sqmm copper control cable including cost of cable, lead, lift, labour charge, etc., complete.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

Thulasingam

RAJ ENGINEERING CONTRACTOR

ASAITHAMBI.M

K DHINAKARAN

C.GOVINDAN