Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAccepted-Finance | ₹4.4 L | L1 | Accepted-Finance Lowest bidder |
| 2 | L2₹4.7 L+₹31,072.09 (7.06%)Accepted-Finance | ₹4.7 L+₹31,072.09 (7.06%) | L2 | Accepted-Finance Other than Lowest bidder |
| 3 | L3₹5.1 L+₹68,862.48 (15.6%)Accepted-Finance | ₹5.1 L+₹68,862.48 (15.6%) | L3 | Accepted-Finance Other than Lowest bidder |
Tender Value
₹5.2 L
EMD Value
₹5,500
Closing Date
17 Sept 2026, 2:00 pmClosed
Executive Engineer, WRD,
O/o Executive Engineer, WRD,Marudaiyaru Basin Division, Ariyalur .
Annual Maintenance of Sidhamalli Dam under the jurisdiction of Sidhamalli Irrigation Section, Jayankondam of Udayarpalayam Taluk in Ariyalur District.
2026_WRD_699888_1
e.Tender Notice no. 04 / 2026-27 / Marudaiyaru Basin Division, Ariyalur / Dated. 31.08.2026
Open Tender
Civil Works
Lump-sum
210 days
Sidhamalli
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹5,500
18 Sept 2026
1 Sept 2026
18 Sept 2026
1 Sept 2026
17 Sept 2026
1 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Manufacturing, supplying and fixing in position of steel windows with the following specifications: Outer frames of windown made of "Z" section F7D of size 33 x 25 x 3mm at 1.419 Kg/m and mullion "J" section (F4B) of size 46 x 25 x 3mm at 2.28 Kg/m and shutter section of made of F7D of 33 x 25 x 3mm at 1.419 Kg/m as specified in IS 7452 / 1990. Each openable shutter should not exceed width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18 x 5mm MS flat at 0.70 Kg/m at 3 Nos. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR sheets in position firmly. 2 numbers of sturdy hinges and one number of handle - cum - latch of special type made with 18 x 5mm MS flats are revetted to the shutters at an appropriate height in window. Suitable opening is left for its easy operation. A stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. Each window shutter having an adjustable stay made out of 18 x 5mm at 0.70 Kg/m MS flat of length 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 120mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18 x 5mm at 0.70 Kg /m welded to the shutter at two place equivalent from each other from top and bottom of the shutter. An MS square bar of 12mm size is welded to the inner face of the window at an equal internal not exceeding 100mm edge to edge between them. All members are painted eith one coat of anti-corrosive red oxide primer as directed by the departmental officers.The cost includes cost of all materials , labour charges and other incidental charges | 4.64 | Sq.m | 4,824.15 | ₹22,384.06 |
| 2 | Engagement of labour for assisting the Assistant Engineer or Juior Engineer in taking levels, Measurements, Preparing estimates, Drawings, Documentation of works, Supervising the maintenance works, Encroachement eviction, Monitoring the tanks, anicuts, supply channels, Surplus course and Rivers, execution of flood protection works, operation of screw gearing shutters in head sluices, etc., complete as per standard specification and as directed by the departmental officers. | 546 | Mandays | 628 | ₹3,42,888 |
| 3Supply of M.sand bags Empty cement bags and Casurina props to section store for using to arrest the breached or leaked portion of tank or anicut portion etc., complete complying with standard specifications and as directed by the Departmental Engineers. | |||||
| 3.1 | Supply of Empty Cement bags | 500 | Nos | 7 | ₹3,500 |
| 3.2 | Supplying and filling up empty cement bags. | 500 | Nos | 81 | ₹40,500 |
| 3.3 | Supply of Casurina Poles dia of 8 cm to 10 cm | 120 | Rm | 19.2 | ₹2,304 |
| 4 | Supplying of grease for Regulator as directed by the Departmental Engineers | 25 | Kg | 580 | ₹14,500 |
| 5 | Purchase of 140 gear oil for screw rod and regulator headset and side channel etc., as directed by the Departmental Engineers. | 25 | ltr | 420 | ₹10,500 |
| 6 | Supplying of Diesel for the Diesel Generator at surplus regulator site | 75 | ltr | 100 | ₹7,500 |
| 7 | Painting to old iron work and shutters with coal tar emulsion paint including cost of paint brush, soap and putty etc., as directed by the Departmental Engineers | 4 | Sq.m | 129.5 | ₹518 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
finance_841330.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
mtcetendersdl.pdf
Tender Documents • 1.07 MB
BOQ_841330.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .