Up-gradation of Fire Fighting and Sprinkler System at CTU Industrial Area Phase I, U.T., Chandigarh

Providing and fixing in position cement concrete of specified grade excluding the cost of centring and shutring -All work up to plinth level . DSR 4.1

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size DSR 4.1.3

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4

Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.1

12 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7

1:4 (1 cement: 4 fine sand) DSR 13.7.2

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. DSR 15.2

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR 15.2.1

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60

(A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) DSR 27.4

(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520

© Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.

(D) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.

(E) Suitable cement concrete foundation duly plastered and with anti vibration pads.

450 lpm at 35 m Head DSR 27.4.2

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : DSR 27.7

100 mm dia DSR 27.7.7

80 mm dia DSR 27.7.6

65 mm dia DSR 27.7.5

40 mm dia DSR 27.7.3

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall DSR 18.10 (DSR)

32 mm dia. nominal bore DSR 18.10.4

Providing and fixing of HOSE CABINET of Size: (600mm x 600mm x 450mm) made of 16 gauge MS sheet with 4mmthick glazed glass door i/c necessary locking arrangement suitable to accommodate 15 mtr. long hose reel pipe & branch pipe mounted on wall or raised bric platform & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect as required. Make: Newage/ Minimax/ Omex/ Safeguard.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : DSR 27.11

80 mm dia DSR 27.11.4

100mm dia DSR 27.11.5

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. DSR 27.17

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18

25 mm nominal bore DSR 18.18.3

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. DSR 27.22

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46

32 mm nominal bore : DSR 18.46.4

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17)

32 mm nominal bore (DSR 18.17.2)

Providing and placing on terrace, polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories DSR 27.21

Pendent Sprinkler DSR 27.21.1

Fabrication, Supply, Installation, Testing and Commissioning of Electrical Control Panel of cubical construction, Floor/Wall Mounted type, Fabricated out of 2 mm thick CRCA Sheet, compartmentalized with hinged lockable door, dust and vermin proof, powder coated of approved shade , interconnection with suitable size copper condutor cable,having switchgears and accessories mountings and internal wiring, earth terminals, complete in all respect, suitable for Terrace Pump of 7.5 HP Capacity, complete as per CPWD specifications with the following Incoming/outgoings suitable for operation on 415 V / 3 Phase, 50 Hz Supply with enclosures protection.

Supplying and fixing MS chequred Plate 5mm thick inclduing cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete in all respects

Providing and Fixing of ABC (Power type) ABC FIRE EXTINGUISHER/ 4 kg HP Mild Steel Cylinders ISI marked approved fitted with pressure indicating gauge capacity complete with discharge horn and mounting it on the wall with a suitable MS bracket (including S/F bracket) minor civil works etc. complete as required of approved make

Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : DSR 27.19

2 way-100 mm dia M.S. Pipe DSR 27.19.1

Supplying and fixing air vessel made of 250mm dia, 8mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required DSR 27.20

Supplying, installing, testing and commissioning of C.I. Dual Plate Wafer type Non-return Valves PN 16 with SS 304 discs with Nitrile rubber lining as per IS:5312 (Part I) 1984, with required flanges, nuts, bolts and gaskets etc. complete.

80mm dia.

100mm dia.

Providing and fixing of G.I. tank Nipple Complete in all respect

Supplying and installing of 3 nos set of Fire Buckets of 24 gauge galvanized steel sheet, standard 9 liter capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters "Fire " in black and gold.

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :: DSR 27.10

Single headed Stainless steel DSR 27.10.2

Painting of Fire Hydrant/Sprinklar pipeline of different sizes installed inside/outside with two or more coats of painting with synthetic enamel paint to give an any shade, including cleaning of surface with detergent etc.

80 mm dia

100 mm dia

150 mm dia

Providing and fixing of flood light of 60/70 Watt make Havells /Crompton phillips etc.

Providing and fixing of LED tube light of 20 Watt make Havells /Crompton phillips etc.

Providing and Fixing of laminated sign board material for indication of Sign board complete in all respect as per the satisfaction of Engineer in charge: (NSI)( Size 24" x 24")

Supplying & fixing of Battery Operated Auto Glow LED Exit Signs Board of size 18” x 6” complete in all respect. (Extra payment will be made if electrical point required)

Providing and fixing of cover for all terrace pumps made up of corrugated pvc fiber sheet with 35*35*5 MS Angel frame with openable door having lockable facility and painting the ms angel with 1 caot of red oxide primer and 2 caot of black enemal paint complete in all respects.

Supplying, installing, testing and commissioning of Copper Conductor Cables, XLPE Insulated, unarmoured IS 7098 (Part 1) marked of approved make Havells, Finolex, Polycab to the satisfaction of EIC

2C x 1.5 Sqmm

3C x 2.5 Sqmm

4C x 4 Sqmm

Please Enable Macros to View BoQ information