PROVISION OF BASIC AMENITIES IN SMQs AND TMQs AND SPECIAL REPAIR TO SEWAGE LINES, OVERHEAD TANKS WITH STAGING INCL SANITARY FITTINGS FOR TMQs UNDER GE (AF) THANE AT AF STN MUMBAI

Amount

M & L for taking down 15mm bore steel tubing & connection including cleaning for re-fixing or removal to store complete all as specified and directed.

M & L for taking down 40mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

M & L for taking down 50mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

M&L for 16mm outer dia, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings stability for hot & cold water supply including fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

M&L for 20mm outer dia, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings stability for hot & cold water supply including fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

M&L for 25mm outer dia, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings stability for hot & cold water supply including fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 cm but n. exc 20 cm girth complete all as specified and directed.

M & L for extra over Ser Item No. 4.00 above for Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.

M & L for extra over Ser Item No. 6.00 above for BALL VALVE complete all as specified and directed.

M & L for extra over Ser Item No. 5.00 above for BALL VALVE complete all as specified and directed.

S&F in repair 15mm bore Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F of 15mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair complete all as specified and directed.

S&F in repair 15mm bore Stop valves/angle cock, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair wash basins, vitreous china (flat back or angle type) of size 550 x 400mm, incl cutting for and pinning in ends of brackets or recting stand including brackets and waste pipe etc. complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (rectangular shape type with closed top) of 5000ltr capacity hoisted and fixed in position complete all as specified and directed including dismantling old tank

S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), Bore dia of pipe in 20 mm, etc complete all as specifed and directed.

Demolition of Cement Concrete (reinforced) in any position not otherwise specifically provided for tanks etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Excavation in trenches not exceeding 1.5m ;wide and n.exc 1.5m in depth for foundation etc or shafts. Wells etc not exceeding 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil.

M&L cement concrete (1:4:8), type D2, using 40mm aggregate in foundations etc. complete all as specified and directed.

M & L Pre-cast cement concrete block masonry wall with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in bed block/coping and similar work including use and waste form work complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L preparing new surface and applying two coats of cement paint over a coat of alkali resistant primer on external wall etc complete all as specified and directed.

M&L for RCC in cement concrete (1:2:4) nominal mix (Using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L for Form work to Slab/Chajja and similar items including edge and using scaffolding complete all as specified and directed.

M&L for 5mm thick rendering in cement plaster 1:3 on fair faces of brick or concrete surface of ceiling of slab/chajjas etc, complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling applying two coats of cement based paint over a coat of alkali-resistant priming on celing complete all as specified and directed.

S&F TMT bars 10mm dia and over, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT bars 6 to 8 mm dia and over as in reinforced, including binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material exc. 5 Km out side MD land complete all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris outside MOD Land complete all as specified and directed.

M&L cement Concrete bed to drain pipes including packing under and completely surrounding pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) bore of pipe is 150 mm complete all as specified and directed.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars,150mm dia pipe complete all as specified and directed.

Demolition cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.

M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

Taking down cement plaster of any description on brick walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall for backing coat of tiles work complete all as specified and directed.

M & L for coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and directed.

M&L for GI tubing 15 mm with all fitting medium grade fixed complete to walls and ceilings or laying in floors 15 mm dia complete all as specified and directed.

M&L for GI tubing 20 mm with all fitting medium grade fixed complete to walls and ceilings or laying in floors 15 mm dia complete all as specified and directed.

S&F 15mm bib taps cast copper alloy with crutch or butterfly handle secured for iron pipe complete all as specified and directed.

S&F 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squatt pattern water closet ( Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F of 15mm bore stop valve (angle cock) fancy type, chromium plated, ISI marked cast copper alloy screwed down high pressure with capstan or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F vitreous china wash hand basin, white flat/angle back size 450x300mm complete including necessary cutting for and pinning in ends of brackets )including brackets and 750mm long PVC waste pipe 32mm bore complete all as specified and directed.

S&F of pillar tap 15mm bore cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe or for union complete all as specified and directed.

S&F 15mm bore Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing PVC connection 450 mm long with brass coupling on both end suitable for 15 mm bore of pipe complete all as specified and directed.

M&L for PVC (SWR) floor trap 75 mm dia of outlet with stainless steel grating including jointing to waste pipe in run led joint complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubbepr ring joints fixed to walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F in repair orrisa pattern viterious china ware white glazed WC 580x440mm with integral foot rest fixed complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surface fair and even complete all as specified and directed.

M & L for preparing newly plastered surfaces and applying two coats of OBD over a coat of primer on walls complete.

M&L for washing, rubbing down and stopping of distemper and painted old surfaces of walls and apply one coat of oil bound distemper complete all as specified and directed.

M&L for preparing old plaster surfaces of walls and apply one coat of cement base paint complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S&F PVC waste pipe 32/40 mm bore complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including waste coupling and pipe and fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F 32/40mm Waste coupling of brass (half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S&F stainless steel kitchen plate rack made of 1.00mm thick stainless steel sheet of size 24'x26'x10' make sumer fixed with nails/ screws complete all as specified and directed.

S&F for providing 18mm thick factory made 100% solid rigid PVC (poly Vinylchloride) foam sheet plain colour having density of 600 kg /Cbm manufactured by ISO 9001- 2015 certified company. Termite proof, water proof and flame resistance PVC sheet, fixing with screws are any type of adhesive (pigment) complete. Manufactured by single layer extrusion process.

S&F for providing 18mm thick factory made 100% solid rigid PVC (poly Vinylchloride) foam sheet prelam colour having density of 600 kg /Cbm manufactured by ISO 9001- 2015 certified company. Termite proof, water proof and flame resistance PVC sheet, PVC film liminated should be pasted on PVC sheet with suitable adhesive and of approved shade fixing with screws are any type of adhesive (pigment) complete all as specified and directed.

S & F for rolled mild steel Fe- 410-W(Gde-E-250) quality-B joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), ornamental and intricate design complete all as specified and directed.

S & F Magnetic catches for cupboard doors complete all as specified and directed.

S&F of 50mm dia, polished, hard wood knobs fixed with screws for cupboard doors complete all as specified and directed.

S & F 40mm continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S & F 65mm Parliament hinges, mild steel cold rolled complete all as specified and directed.

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded FRLS Copper conductor cable 1.5 Sqmm drawn and including PVC casing capping and accessories, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity FRLS copper conductor cable of size 1.5 Sqmm green colour connected to common earth dolly including sunken type pressed steel terminal boxes concealed in wall Covered with 3mm bakelite sheet laminated sheet top cover of required thickness 3mm white colour for mounting switches/ sockets/ fan regulators / bell push buttons etc fixed with brass screws and washers including making good disturbed surface all as specified and directed for the following :-

One light / fan/bell point controlled by one way switch

Supply and Fix Switch piano flush type single pole one way 5 Amp complete all as specified and directed. .

Supply and Fix ceiling rose, surface bakelite 65x50mm three terminal complete all as specified and directed. .

Supply and Fix fan regulator 100/120W step type electronic 240 v complete all as specified and directed. .

S & F ceiling fans,complete with three blade, down rod(300mm to 900mm) long, accessories 230V, 50hz, 1200 mm sweep, with squirrel cage induction motor complete all as specified and directed.

S & F exhaust fan, steel body AC single phase, 230 v of size 300 mm sweep with , blades and frame and louvers complete all as specified and directed.

M & L for making hole, by cutting wall/brick masonary of existing room for fixing of 300 sqmm sweep exhaust fan and making good disturbed surface all as specified and directed.

Maaz Construction

Vishal Builders