PROVN OF ROAD NEAR WAR MEMORIAL AT 136(I) INF BDE GP CAMP AT POOH UNDER GE 863 EWS

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil comlete all as specified and directed.

Removal of surplus spoil to a distance exc. 50 Mtr but n exc 100 mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for rolling and consolidating formation surfaces in cutting including watering as necessary and consolidation to the required level, gradient or camber with 8 to 12 tonne power roller including filling in hollow and depresion with soil as required complete all as specified and directed.

M&L for 150mm spread thickness, soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 10 tonne power roller complete all as specified and directed.

M&L for 150mm thick (in two layers of 75mm each layer) (Compacted thickness) WBM with coarse aggregate (type of aggregate Lime stone, Sand stones, Flint or Quartzite) of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required with 8 to 10 tonne power roller complete all as specified and directed.

M&L for preparing WBM surface by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, and applying evenly priming tack coat with paving Bitumen 60/70 or VG-30 grade over the prepared surface by mechanical sprayer @ 10 kgs/10 Sqm of surface area complete all as specified and directed.

M&L for premix bituminous macadem laid, rolled and compacted to required gradient and camber consolidated thickness not exceeding 75 mm with 4% binder of paving Bitumen VG-30 grade, content by weight of total mix, mixed in hot mix plant and laid by mechanical paver finisher complete all as specified and directed.

M&L applying evenly priming tack coat with paving Bitumen 60/70 or VG-30 grade over the prepared surface by mechanical sprayer @ 5 kgs/10 Sqm of surface area complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 40 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed. NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch 'A'. (ii) Price adjustment shall be done on MINUS side only @ Rs. 45,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'. (iii) No Price adjustment for Bitumen shall be done for variation on plus side. (iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foregion matters etc to receive the markign and M&L for thermo plastic (Reflective) line, dashes, arrows, letters etc of following size wide marking, having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed:- Note: - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

width exc 10cm wide.

H S ENTERPRISE (BID ID -3177716)

R B TRADERS (BID ID -3181672)