REPAIR MAINT OF SOLAR LIGHTS SECURITY LIGHTS GARDEN LIGHTS BUILDING LIGHT HIGH MAST LIGHTS ETC AT MIL STN SHAHJAHANPUR UNDER GE EAST BAREILLY

Amount

Taking down/repair of the defective security / street light fittings from wall / pole mounted of following type and refixing the same in its position after replacement of unserviceable spare parts such as choke, capacitor, igniter, holder, lamp connector etc complete all as specified and as directed :Note; Spare parts will be measured and paid separately as supply only against the following item no 2 to 16

Supply only Iginitor suitable for 70-400 w HPSV/MH Lamps of Make surya cat part NO. - SIG I 70-400SV/MH 1x70-400W SV/MH.

Supply only Porcelain lamp holder for HPSV, HPMV 250 / 150 watt

Supply only Porcelain lamp holder for HPSV/HPMV 125/80/70 watt

Supply only Porcelain connector for HPSV/HPMV fitting of any type

Supply only Chock for T-5, 2X24 Watt fitting.

Supply only Tube rod for T-5, 1X24 Watt fitting.

Supply only CFL 85 Watt retrofit

Supply only CFL 65 Watt retrofit

Supply only Copper Chock for HPSV/HPMV 250-400 W.

Supply only Copper Chock for HPSV/HPMV 150W .

Supply only Copper Chock for HPSV/HPMV 70Watts.

Supply only MH/SV Lamp Single Ended 250 Watts.

Supply only MH/SV Lamp Single Ended 150 Watts.

Supply only MH/SV Lamp Single/Double Ended 70 Watts.

Supply only MH Lamp Single/Double Ended 250 Watts.

Taking down old unsv street light fitting, and Supply and fixing new LED Street light fitting 60 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed

Taking down old unsv street light fitting and Supply and fixing new LED Street light fitting 70 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed.

Taking down old unsv street light fitting, Supply and fixing new LED Street light fitting 45 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed .

Taking down old unsv street light fitting and Supply and fixing new LED Flood light fitting 100 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed.

Taking down old unsv garden light, fitting and Supply and fixing new Extruded aluminium decorative luminaire for LED (Retrofit). is an ideal solution for Garden/pathways light of housing material powder coated Zn plated ERW MS tubular section , coloure temp cool white 6500K LED 15 watt complete including making connection complete all as specified and directed .

Dismantling and taking down the existing old rusted and weak mounting brackets of any size & type.complete all as directed .

Supply and fixing mounting bracket made out of 40 mm bore medium grade GI tubing suitable size bent to shape including 02 Nos MS clamps, Nut bolts, washers etc all as directed by EIC.

S & F in replacement 9 W to 15 W Solar LED Street Light complete all as specified and as directed .

S & F inreplacement 60 W to 90 W LED Street Light Soler Panel Plate complete all as specified and as directed

S & F in repacement post top lantern type light fitting (RUBY (CLEAR) - IP65 ) New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.including making connection complete all as specified and directed

S & F Decorative gate light made up of high grade unbreakable ( Doom Only) polycarbonate material suitable for retrofit LED Lamp.9W/10W Lamp B22 base.complete all as specified and directed

Dismantling of old UNSV/rusted steel tubular poles of 410 SP-31 (9.0metres long) necessary disconnecting cables/over head condcutor and removing unserviceable pole from site complete all as specified and directed.

Supply and fix in replacement Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0metres long) complete all as specified and as directed

Taking down old defective LT cable/conductor of any size and capacity complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 Core. complete all as specified and as directed

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4.0 Core. complete all as specified and as directed

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2.0 Core complete all as specified and as directed .

Boring under Road / PCC by using manual tool for inserting PVC/GI pipe of 40mm size for protection of cable complete all as specified and as directed .

Trimming of trees all as along the LT line in such a way that there is clear distance of 3 meter between tree and electric line. The work will be executed to the entire satisfaction of Engr-In-Charge irrespective of the size of the tree branches etc complete all as specified and as directed. Note : (i) Tree branches etc will be left as itias the wood belongs to Cantt board/DEO and they will be responsible for the wood. (ii) Contractor will employ sufficient labour to complete the full one job with in about 15 days. (iii) Contractor will responsible for any type of accident while trimming the trees. (iv) Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply, however full assistance will be provided by MES staff.

S & Fixing of lead acid battery, 180 AH, industrial heavy duty, 25/ 27 plates for DG set starting Model- MHD-FXPO-1800 of Exide or equivalent after disconnecting connection and taking down the unserviceable one

M&L Preparation of old (exposed) painted surface of existing (410 SP-31 ) Steel tubler poles /strut including cross clamps etc complete and applying two coat of aluminium paint above band/straps and painting of band/strap with paint of colour red post office and black numbering of pole at a height 1.5 m above GL as per existing having 15mm wide of poles at a heigth 1.5 M above GL as per existing having 15 mm wide and 50 mm bolt letter compete all as specified and directed .

M&L for replacement of cross arms. bracing supports. clamps back plates. fabricated from strucural steel sections including nut bolts washers . welding. bending cold or hot drilling holes for bolts in any shape or size as indicated or directad and incclusive of two coat of aluminium paint over one coat of redoxide . including taking down of unsv items all as specified and directed .

M&L Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for coping around poles, including necessary form work finishing even and smooth complite all as specified and directed .

Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying under ground LT XLPE /LT Pole cable and getting soft/loose soil complete all as specified and as directed

Returning , filling in including spreading, levelling, watering and well ramming in laying not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material (soils) to a distance not exceeding 50 m and depositing whare directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for river fine sand, washed and screened dry for caushioning to under ground cable in trenches below and around under ground cable including spreading and levelling punning complete all as specified and as directed

M&L for laying bricks, sub class'B' for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed.

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 10 sqmm 2 core in service connections , one twin core cable circular complete all as specified and as directed .

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 6.0 sqmm 2 core in service connections suspended by insulating hangers not more than 1 metre apart including 10sqmm suspension wire, one twin core cable circular complete all as specified and as directed .

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 2.5 sqmm 2 core in service connections complete all as specified and as directed .

S&F vertical three phase distribution board including MCCB 4 pole 63 Amps as incomer with three phase and single phase TP/SP as outgoing complete with insulated bus bar arrangement IP 43 protection with metal double door type 4 way complete all as specified and as directed .

S&F vertical three phase distribution board including MCCB 4 pole 100 Amps as incomer with three phase and single phase TP/SP as outgoing complete with insulated bus bar arrangement IP 43 protection with metal double door type 4 way complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate notless'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion

Supply & filling distilled water in batteries as required at various DG set installations all as specified and directed. Note :- Tenderer may note that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract

M/S CHAUHAN ELECTRIC WORKS

M/s. S.S. Refrigeration, Bareilly

LEEJA ENTERPRISES

M/S Rajeev Sharma and Co.