Renovation of 2 units Type-II Qtrs at DSS colony in Kadamtala, Middle Andaman.

Amount

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead, including cost of all labour charges, minor tools etc, complete. The rate is inclusive of consumable items and GST.

Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 metres lead of. Asbestos sheet. Including cost all labour charges, minor tools etc, complete.The rate is inclusive of consumable items and GST.

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the materials within 60 metres lead, including cost all labour charges, minor tools etc, complete. The rate is inclusive of consumable items and GST.

Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285, anodised transparent or dyed to required shade according to IS 1868 (Minimum anodic coating of grade AC 15), fixed with raw plugs and screws of with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and skles with required PVC / neoprene felt etc. aluminium sections shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium strap beading for glazing / panelling, CP brass / stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing and panelling to be paid for separately). For Fixed Portion.The rate is inclusive of consumable items and GST.

Providing and fixing glazing in aluminium door, window ventilator , shutters and partitions etc. with PVC neoprene gasket etc. complete as per the architectural drawings and the direction of EIC with glass pan of 5.5 mm thickness (weight not less than 13.50 kg/sqm)( cost of aluminium snap beading shall be paid in basic item), including cost of all materials, labour charges, transportation charges to work site, minor tools etc, complete.The rate is inclusive of consumable items and GST.

12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade -1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade -1, Type II marked :including cost of all materials, transportation charges, labour charges, minor tools etc, complete.The rate is inclusive of consumable items and GST.

Fabrication of MS Grill to windows including cost of cutting the steel flat, plate, angle etc hire charges of welding set cost of electrodes, transportation charges to work site, cost of of all materials, all labour charges, minor tools etc complete.The rate is inclusive of consumable items and GST.

Providing and fixing 6 mm thick oceanic sheet ceiling of Everest or equivalent make of size 610 mix 610 mm with necessary nails etc. In the aluminium framed ceiling (frame work to be paid separately) including cost of oceanic sheet all labour charges transportation miner tools etc. completes. The rate is inclusive of consumable items and GST.

Providing and laying Ist quality Ceramic glazed Floor tiles (300 x 300 mm, thickness to be specified by the manufacturer) confirming to IS 13753 of approved make like Nitco, Orient, Somany, Kajaria, or equivalent make, laid on 20 mmm thick bed of cement mortar 1:3 (1 Cement, 3 Pulverised sand) including pointing the joint with white cement and matching pigmet etc. complete, including cost of cement with (OPC Gr-43, IS 8112:1989), local pulverised sand, all labour charges, transportation charges of all materials to work site, minor tools etc complete.The rate is inclusive of consumable items and GST.

Steel work in built up G.I. tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers, including cost of G.I. pipe, all labour charges, transportation charges to work site, minor tools etc, complete. The rate is inclusive of consumable items and GST.

Steel work in built up MS tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers, including cost MS pipe, all labour charges, transportation charges to work site, minor tools etc, complete..The rate is inclusive of consumable items and GST.

Providing and fixing of precoated steel roofing of 0.6mm thickness (without curve) using hill top screws, 83mm with hill top washers 16mm and 19mm over the already fabricated steel truss, including the cost of precoated steel sheets, Hi-Hi screws, washers, drilling holes, cost of hire charges of drilling machine, transportation charges of all materials to worksite, all labour charges, minor tools etc., complete. The rate is inclusive of all consumable items and GST.

Providing and fixing of precoated steel roofing ridges of 0.6mm thickness (without curve) using hill top screws, 83mm with hill top washers 16mm and 19mm over the already fabricated steel truss, including the cost of precoated steel roofing ridges, Hi-Hi screws, washers, drilling holes, cost of hire charges of drilling machine, transportation charges of all materials to worksite, all labour charges, minor tools etc., complete. The rate is inclusive of all consumable items and GST.

Painting with synthetic enamel paint over the tubular truss, including cost of paint, brush, all other materials, scaffolding charges, transportation charges of all materials to worksite, minor tools etc., complete. The rate is inclusive of consumable items and GST.

Providing and fixing 20 cm thick masonry with Hollow block of size 0.40 X 0.20 X 0.20cm cast with Cement concrete 1:3:6 (one cement, three local pulverised sand and six 11.2 mm local stone chips), curing, fixing with CM 1:4 in walls, including cost of cement with (OPC Gr-43, IS 8112:1989), local pulverised sand, local stone chips, all labour charges for casting, curing, walling, hire charges of Hollow block casting machine, cost of timber pallets,transportation charges of all materials to work site, all labour charges minor tools etc complete.The rate is inclusive of consumable items and GST.

Providing and fixing 10 cm thick masonry with Hollow block of size 0.40 X 0.20 X 0.10cm cast with Cement concrete 1:3:6 (one cement, three local pulverised sand and six 11.2 mm local stone chips), curing, fixing with CM 1:4 in walls , including cost of cement with (OPC Gr-43, IS 8112:1989), local pulverised sand, local stone chips, all labour charges for casting, curing, walling, hire charges of Hollow block casting machine, cost of timber pallets, transportation charges of all materials to work site, all labour charges minor tools etc complete. The rate is inclusive of consumable items and GST.

Earth work in excavation over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50 m and lift up to 1.5 m disposed earth to the levelled and neatly dressed, including cost of all labour charges, minor tools etc, complete.The rate is inclusive of consumable items and GST. All kinds of soil

Providing and laying local pulverised stone sand filling below the column foundation, plinth beams and floor etc, including cost of local pulverised stone sand, watering, ramming, consolidation, including cost of transportation charges of all materials to worksite, all labour charges, cost of minor tools etc. complete.The rate is inclusive of consumable items and GST.

Providing and laying in position plain cement concrete PCC 1:3:6 (1 cement, 3 pulverised stone sand and 6 graded stone aggregate 20mm nominal size), including cost of cement (OPC Gr-43, IS 8112:1989), pulverised stone sand & stone aggregates from local quarry, mixing of concrete, conveying and placing the same, consolidation and curing, cost of all other materials, hire charges of mixer machine, transportation charges of all materials to work site, all labour charges, cost of minor tools etc., complete. All work up to plinth level. The rate is inclusive of all consumable items and GST.

Providing and laying RCC 1:1.5:3 (1 Cement, 1.5 pulverised sand and 3 local stone chips 20 mm nominal size) for foundation, works as directed by the EIC, , including cost of cement with (OPC Gr-43, IS 8112:1989), Pulverised sand & local stone chips, screening and washing of both the aggregates, mixing of concrete, conveying and placing the same, consolidation and curing, cost of all other materials, hire charges of mixer machine,vibrator, transportation charges of all materials to work site, all labour charges, cost of minor tools etc complete. The rate is inclusive of consumable items and GST.

Providing and fixing Tor steel reinforcement for R.C.C. work including cutting, bending, binding, and placing in position cost of G.I. binding wire, cost of transportation charges of all materials to worksite, all labour charges, cost of minor tools etc. complete. The rate is inclusive of consumable items and GST.

Providing form work including centering shuttering so as to give rough finish strutting and propping etc. height of propping and centering below supporting floors to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work, including cost of transportation charges of all materials to worksite, all labour charges, cost of minor tools etc. complete. The rate is inclusive of consumable items and GST.

Plastering with Cement mortar 1:4 (1 Cement and 4 Mainland River sand) for 12 mm thick over hollow block wall, exposed concrete surface etc, including cost of cement with (OPC Gr-43, IS 8112:1989), cost of mainland river sand, all labour charges, transportation charges of all materials to work site, cost of minor tools etc., complete. The rate is inclusive of consumable items and GST.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two coat) over and including priming coat with cement primer. including cost of all materials, labour charges, transportation charges to work site, minor tools etc, complete.The rate is inclusive of consumable items and GST

Painting Two coats with Exterior emulsion paint of approved brand and manufacture to give an even shade, including cost of all materials, labour charges, transportation charges to work site, minor tools etc, complete. The rate is inclusive of consumable items and GST.

Providing and fixing PVC Syntax tank 1000 lit (03 layered) capacity including cost of syntax tank fitting charges,syntex tank, all labour charges, transportation charges, etc complete.The rate is inclusive of consumable items and GST.

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work), all labour charges, curing, transportation charges of all materials to work site, and minor tools etc complete.The rate is inclusive of consumable items and GST. GI pipe 20 mm dia nominal bore.

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work), all labour charges, curing, transportation charges of all materials to work site, and minor tools etc complete.The rate is inclusive of consumable items and GST. GI pipe 20 mm dia nominal bore.

Providing and fixing GI union socket of approved quality, including cost of all materials, all labour charges, curing, transportation charges of all materials to work site, and minor tools etc complete.GI pipe 20 mm dia nominal bore.The rate is inclusive of consumable items and GST. GI union socket 20 mm, GI union socket 15 mm

Providing and fixing GI union socket of approved quality, including cost of all materials, all labour charges, curing, transportation charges of all materials to work site, and minor tools etc complete.GI pipe 15 mm dia nominal bore. The rate is inclusive of consumable items and GST. GI union socket 15 mm

Providing and fixing GI union socket of approved quality, including cost of all materials, all labour charges, curing, transportation charges of all materials to work site, and minor tools etc complete.GI pipe 15 mm dia nominal bore. The rate is inclusive of consumable items and GST. GI union socket 15 mm

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore., including cost of all materials, transportation charges, labour charges, minor tools etc, complete.The rate is inclusive of consumable items and GST.

BLUE CHIP CONSULTANCY SERVICE