Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.3 LAccepted-AOC GT ROAD MALSIAN JALANDHAR | MALSIAN | JALANDHAR | PUNJAB | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹28.4 L+₹4.1 L (16.9%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹30.8 L+₹6.4 L (26.5%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹37.6 L
EMD Value
₹75,260
Closing Date
9 Feb 2023, 6:00 pmClosed
CWE Jalandhar Cantt
HQ CWE Nalwa Road Jalandhar Cantt PIN-144005
Please refer tender documents
2022_MES_566583_2
8322/58/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
Jalandhar Cantt
Class D Category a(i) or a (v) for contractors enlisted with MES
8 documents required · 8 mandatory
₹500
Garrison Engineer East Jalandhar Cantt
₹75,260
Yes
20 Feb 2023
20 Jan 2023
16 Feb 2023
20 Jan 2023
9 Feb 2023
27 Jan 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed and removing excavated material to a distance exceeding 1.5 km not exec 5 km and depositing where directed.
Rolling and consolidattion of formation surface in cutting of roads/berms etc to the reqd level, gradient and camber with 8 to 12 tons power road roller incl filling in depressions which occure during process with approved earth.
M&L for 150mm thick solling (or sub base) with broken boulder crushed/ broken stone interstices filled surface formed and rolled with 8 to 12 tones power roller to reqd camber and gradient complete all as specified and directed.
M&L for 150 mm thick (compacted thickness) in ( two layers 7.5cm thick) each water bound macadom with graded broken stone aggregate of grade (40mm to 90mm) granite trap or basalt, spread, levelled,rolled and consolidated to reqd gradient camber and rolled with 8 to 12 tonne power road roller all as specified.
M&L for preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with bitumen VG-10 @ 10 kg per 10 sqm of road surface, and laying 40mm thick bituminous premixed asphaltic semi dense concrete with 5.5% binder content VG-30 by weight of total mix with mechanical paver rolled and compacted to required camber and gradient and rolled with 8 to 12 tonne power road roller to required gradient and camber complete all as specified and directed.
M&L precast cement concrete 1:2:4 Type B1 (using 20mm graded aggregate) as in kerbs or mud stops set in CM 1:4, including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for preparing bituminous surface of road and marking 2.5mm thick centre line, stop lines, dashes, arrows etc and the like n.exc 10cm wide on roads pavement with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
M&L for cat eye ABS plastic with nail of size 120x120mm, 43mm reflective glass colour white/red/yellow provided with steel zinc plated with bolt of 12mm dia length 120mm for fixing to road by hammering complete all as specified and directed.
Removal of surplus spoil to a distance exceeding 250 m but n. exceeding 500m and depositing where directed as specified
Motorway Constructions
s.v and co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .