CERTAIN REPAIR TO FLOORING, PLASTERING, JOINERY AND OTHER MISCELLANEOUS MAINTENANCE WORK AT TECHNICAL AREA UNDER AOR OF GE (AF) SRINAGAR

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge

Dismantling wall and ceiling boards, fibre pulp insulation etc or insulation boards / slabs / blankets, any thickness, including cover fillets and snap grid complete all as specified.

Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge.

Notes : - (i) For the purpose of measurement and payment for item 03 above, flat area of those sheets and ridges needing replacement shall only be measured and no payment for any other sheets taken down for the convenience of contractor or for any other reason whatsoever shall be made. Contractor’s quoted rates shall be deemed to include for the same and nothing extra shall be admissible on this account (ii) The rate quoted shall also be deemed to include for taking down of wind ties.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm fixed on and including new suitable MS brackets complete including, 32 mm size brass chromium plated waste coupling, plug & chain etc complete.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers of 4 mm dia GI wire adjusting level fixed to roof slab by meanes of ceiling cleat as per manufacturers instruction complete.

M&L for 12 mm thick gypsum board in ceiling fixed with self drilling screw as per manufacturers instructions, sealing of joint with tape and applying two coats of oil bound distemper over a thin layer of cement base wall care putty complete all as specified.

S&F decorative self designed false ceiling of Non asbestos fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including mild steel galvanised powder coated ceiling snap grid frame work of angle / T sec of size 25 x 15 x 0.5 in square pattern of grid size 600mm X 600mm. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge.

S&F 0.63 mm thick, Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook and washers, in roofs etc. with grade of zinc coating 275 gram / Sqm all as specified and as directed by Engineer-in-charge

S&F 0.80 mm thick, Galvanised, plain mild steel sheeting fixed with L-type or J-type or cranked hook and washers, in roofs for ridge etc. with grade of zinc coating 275 gram / Sqm all as specified and as directed by Engineer-in-charge

Fixing only Galvanised, corrugated mild steel sheeting in any position, fixed with J-type screws and washers in roof, walls etc. complete all as specified. Note:- Old sheeting retrieved vide BOQ item No 3 shall be reused.

M&L for tightening bolts and closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6 mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25 mm in length complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces including finishing the surface even and smooth with using extra cement and mixing only integral water proofing compound as per manufacturer,s instruction complete all as specified and as directed by Engineer-in-Charge. Note:- WPC shall be measured and paid seperately

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement complete all as specified.

Supply only integral water proofing compound.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each, complete all as specified.

All as per item No 17 above but area exceeding 1.5 sqm and not exceeding 4.00 sqm each, complete all as specified.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge

Re-fixing shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge

S&F Pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh hold bar, thickness of sheet 1.25 mm and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

S&F Pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh hold bar, thickness of sheet 1.25 mm and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

S&F 35mm thick, 2nd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed by Engineer-in-Charge.

S&F 30 mm thick, 2nd class hard wood, glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(b) complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete.

S&F Hasp and staple, 100 mm size, ISI marked safety type, of aluminium anodised with mild steel hinge pin including bolts to hinge plate, fixed with screws complete all as specified and as directed by Engineer-in-Charge.

S&F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium handles cast type anodised of size 125mm long ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 2nd class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door / window stoppers and like articles not exceeding 200 cubic centimetres each complete all as specified and as directed by Engineer-in-Charge.

S&F Box Type Steel windows with tubular frame side hung shutters including projecting type hinges with steel handle, 100 mm long and steel peg stay, complete with glazing and gauged pannel and guard bars, dovetailed or welded including one coat of red oxide zinc crome primer & PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate for embedding of holdfast, all as shown in Dwg No CEUZ/TD/1269/2008. complete all as specified & directed by Engr-in-Charge.

S&F Box type steel ventilators with top hung shutters with glazing/gauged pannels with guard bars, including hinges, steel side arms or peg stays and locking arrangements, all as shown in Dwg No CEUZ/TD/1269/2008.complete all as specified & directed by Engr-in-Charge.

S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165

S&F Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads not exceeding 1.5 Sqm complete all as specified and as directed by Engineer-in-Charge.

S&F 03 mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F 03 mm thick sheet glass, figured glass (Frosted), pin head type and glazing with oil putty / wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting, (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting, (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Refixing of old steel tubing (retrieved vide item No 38 of BOQ) and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge.

Refixing of old steel tubing (retrieved vide item No 39 of BOQ) and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge.

S&F in repair Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for 15 mm bore dia of pipe, complete all as specified and as directed by Engineer-in-Charge

S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 20 mm, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and as directed by Engineer-in-Charge

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass chromium plated shower roses with or without swivel joints, 75 mm dia, including fixing to 15 mm bore steel pipe or union all as specified.

S&F in repair 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.

M&L for 75 mm thick PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous china squatting pan, orrisa pattern, of size 580x440mm, white with integral foot rest with P or S trap including provision of cement concrete bedding (excluding flushing cistern and flush pipe) but including, making connections and demolition of concrete / lime concrete bedding for taking out existing broken squat pan complete all as directed at site.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete.

S&F in repairs One piece WC including twin flushing cistern and soft closing seat cover and all connected items complete all as specified Make:- CERA (CAPSTAN) Cat part No.:-S1013106, Jaquar Cat No.:-VGS-WHT-81851SN or equvallent model No of make Hindware

S&F in repairs PVC low level flushing cistern, valveless, syphonic action type, double push botton, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete, complete all as specified.

M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the top surface even and smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge.

S&F Glass dividing strips, 3 mm thick, 38 mm wide, fixed in position complete all as specified.

S&F in repairs Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work of thickness 19 mm complete all as specified.

Extra over rates of item No 59 for external teak wood lipping, 6 mm thick fixed with nails all as specified.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified and as directed by Engineer-in-Charge.

S&F in repair 25 mm Dia Curtain rod, anodised aluminium alloy chromium plated, fixed with bracket and end caps etc including taking down of existing curtain rail, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 2 mm thick cement base wall care putty, all as specified.

M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge

M&L for Preparaing old painted surface of walls by washing, rubbing down and stopping of holes and applying one coat of oil bound distemper, complete all as specified and as directed by Engineer-in-charge

M&L for Preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat primer complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparaing old painted surface of walls (plastered or unplastered) by Washing, rubbing down and stopping holes and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge

M&L for Preparation of new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth, applying one coat pink primer and finished with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old painted wood and wooden base surfaces of any description over 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for Preparation of old painted steel surfaces of any description exc 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, fancy type with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, complete all as specified and as directed by Engineer-in-Charge.

Demolition of floor, hearth or wall tilling including cement mortar bedding / backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for screed bed / bedding layer 10 mm thick in CM 1:4 or fixing of tiles/ Granite work complete all as specified and directed by Engineer-in-Charge..

M&L for rendering / backing coat 10 mm thick in CM 1:3 on brickwork or concrete surfaces of walls for fixing of tiles complete.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) of Gde BIIA area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over complete all as specified and directed by Engineer-in-Charge.

M&L for colour double charged vitrified ceremic tiles 10 mm thick (Square / Rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spfd colour and design approved by Engr-in-Charge.

All as per item No. 80 above but on vertical surfaces such as dados, skirtings and risers to steps, complete all as spfd colour and design approved by Engr-in-Charge.

M & L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

M&L for Lagging to pipes 25 mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spfd colour approved by Engr-in-Charge.

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified.

Supply only PVC waste pipe for 32 mm bore pipe complete all as specified and directed by Engineer in Charge.

S&F in repairs ABS body CP Health faucet fixed with spring action and lever along with 1.2 mtr long flexible connection pipe for supply of water fitted in the existing water connection in the toilets, complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass CP Jet Spray of Standard size for EWC alongwith connection and all fittings as fixed , Complete all as specified and directed by Engineer-in-Charge.

S&F in repair Toilet paper holder cast copper alloy chromium plated fixed to walls with chromium plated brass screws, complete all as specified and as direted by the Engr-in-Charge

S&F in repair PVC seat cover for EWC colour white incl hinging device, complete all as specified and as direted by the Engr-in-Charge.

S&F in repair brass spindel with nylone washer sutaible for cast copper alloy chromium plated bib taps, angle valve, stop cocks, pillar taps, mixer etc, complete all as specified and as direted by the Engr-in-Charge

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf of size 60 mm x 120 mm with chromium plated bracket, guard and railing complete. Make: Cera / Prayag / Jaquar

Supply and fix in repair 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including complete.

Supply and fix in repair 1000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including complete.

M&L for taking down aluminium glazed door of size exc 1.5 Sqm but n. exc 2.0 Sqm (each leaf), & S&F in repair of hard ware fitting such as stainless steel top & Bottom patch, Pivot, tightening of joint and adjustment of floor door spring and refixing shutters in same positioning for smooth functioning complete. Note:- Floor door spring if found unserviceable same will be replaced & will be measured & paid separately under respective item of this BOQ.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg / m including necessary joining cleats, glazing clips, rubber neoprene packing, 150 mm handles 2 Nos in each door shutter, 100 mm hinges-03 Nos, 150 mm tower bolt -02 nos in each shutter anodised aluminium snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg / m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.) hinge type B-21, 100 mm long (2 no) suitable handle (1 no), complete all as specified and directed by Engineer-in-Charge.

S&F sheet glass 5.5 mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular, complete all as specified and directed by Engineer-in-Charge. Note:- Cost of glazing clips and rubber neosprine gasket shall be included againest item No 101 & 102

S&F aluminium composite panels, 5 mm thick as in doors / paneling, of any colour, shape, size and design fixed in aluminium frame work including all necessary fittings and fixtures and necessary taping, complete all as per manufactures instructions, complete all as specified.

M/S FAROOQ AND SONS

M/S M.R. Construction

M/S Thakur & Sons

M/S WANI AND SONS