Providing of new BTS Shelter at NBSNL site at Shalibanda HD2174 and dismantling of exisiting BTS shelter at Shalibanda after providing of new BTS shelter in view of proposed metro rail works

Amount

1) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement: 1.5 coarse sand (zone-l1) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

2) Centering and shuttering including struting, propping etc. and removal of form for all heights: Columns, Pillars, Piers, Abutments, Posts and Struts.

3) Steel reinforcement for R.C.C. work including straightening, cutting. bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade 150.00 Kg Fe-500 D or more.

4) Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement: 3 fine sand).

5) Providing and fixing plain lining with necessary screws/nuts & bolts/nails fixed on wooden Isteel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately). 12mm thick commercial ply conforming to IS: 1328 BWR type.

6) Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

7) Providing and fixing precoated galvanised 12.00 Sqm iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tappingg screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

8) Finishing walls with Acrylic Smooth exterior paint of required shade : a) New work (Two or more coat applied @1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10.sqm).

9) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade a) Two or more coats on new work.

10) Assembling/Erection of BTS shelter of size 3.13X2.14X2.75 m including jointing the panels with pop up rivets, injecting the silicon sealant at panel joints and fixing to the bottom runners with SS nuts. Cost includes all labour charges, materials like Silicon sealant, pop up rivets and ss nuts & bolts of size M6X75mm etc all complete.

11) Dismantling of BTS shelter of size 3.13 X 2.14 X 2.75 m including shifting of materials to ground floor from building of G+2 terrace and stacking of shelter panels in good condition at designated place, all complete as directed by Engineer-In-Charge.

12) Providing and laying of 2.00 mm thick Antistatic polyvinyl chloride sheet of approved brand TUSKER or equivalent on a smooth and damp proof base using rubber based adhesives (viz. Dunlop 8753 or equivalent) including rolling with Light wooden roller weighing about 5 kg all complete including providing 40 mm wide copper strip fixed to floors with rivets / nails where ever required as per manufacture specifications. The copper strip shall be provided along the periphery of the room leaving 200mm border and under all pvC sheet joints. The copper strip shall be exposed at required locations. The rate includes all materials specified above.

13) Providing and fixing anchor fastners (expansion fastners) of approved quality including drilling holes in RCC and fixing complete 12 mm dia and 100mmm lenth

14) Drilling holes of 16mm dia in RCC slab/beam upto a depth 120 mm and embedding 12mm dia TMT bars of grade Fe 500D in the hole including grouting the hole with FOSROCK LOKFIX chemical or approved equivalent to anchor reinforcement excluding the cost of reinforcement as per direction of Engineer-in-Charge. ( the work shall be carried out as per manufactures specification through the applicator approved by the manufacturer).

15) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means inciluding loading, transporting. unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved.

16) Sorting & Collection and Mechanical transportation of BTS shelter (3.13 x 2.14 x 2.75) materials, including loading, unloading and shifting to place of work etc all complete .

i) from TE building Charminar to NBSNL work site at Shalibanda (HD-2174). (Approximate lead of 3.0 Km).

ii) from NBSNL work site at Shalibanda (HD-2174) to TE building at Charminar. (Approximate lead of 3.0 Km).