SPECIAL REPAIRS TO ROADS FROM MAIN GATE TO BLDG NO T-57 AND T-47 TO T-48 AT ARMY AREA COIMBATORE UNDER AGE (I) COIMBATORE

Amount

M&L Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat over black top surface using bitumen VG-10 grade at 5 Kg/10 Sqm complete all as specified and as directed.

M&L Bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.50 % binder content by weight of total mix using bitumen VG-30 grade, rolled and compacted to required camber and gradient using mechanical paver and rolling with 8 to 12 tonne power roller complete all as specified and as directed.

M&L Cleaning and preparing the road surfaces/existing or new painting surface of cement or bituminous surfaces and applying 2mm thick road marking painting (Retro reflective) of specified shade/ colour with thermoplastic marking paint confirming to BIS 3262 laid down through fully automatic thermoplastic paint applicator machine fitted with profile shoe, Glass beads dispenser, propane tank heater and profile shoe heater complete all as specified and directed. Note:- i) Road marking paint shall confirm to MORTH 803.4 Ver III (Specification for thermoplastic road marking material). ii) The colour, width and layout of road markings shall be in accordance with the code of practice for road marking with paints, IRC:35.

S&F Cat eye's solar reflective type made of metal body alloy of size 100mm x 100mm x 20mm, Model No DA972.1 fixed with and including MS stud of suitable size as per manufacturers instructions, fixed in repairs including removal of old one complete all as specified and as directed.

S&F Cat eye's of size 100mm x 100mm x 20mm made of tough polycarbonate body with electronically welded prismatic retro reflective lenses on two side for maximum retro reflection in wet and dry condition fixed with hot bitumen adhesive, fixed in repairs including removal of old one complete all as specified and as directed.

S&F Metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors mounted on 45/50mm dia mild steel pipe 600 mm height, duly powder coated and thermo plastic elastomeric 3 bands of green red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection embedded 200 mm below ground level including excavation and PCC 1:2:4, type B1 using 20 mm graded stone aggregate in foundation of size 200 mm x 200 mm x 200 mm and making good surface complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings not exceeding 15 cm thickness (below or above GL) complete all as specified and as directed.

M&L 75 mm thick, PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in floors/pavings etc. complete all as specified and as directed.

M&L Sand filling /cushioning under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L 60mm thick Machine pressed precast concrete interlocking paver block M-40 grade with grey cement and pigment any shape and size confirming to IS 15658-2006, complete all as specified and as directed.

M&L Precast cement concrete blocks in PCC 1:2:4, type B1, using 20mm graded aggregate and set in CM 1:4 as in kerbs complete all as specified and as directed.

Demolition of cement concrete (reinforced) in ground floors (including tiles / floor finishes) and pavings not exceeding 15cm thickness (below or above GL) complete all as specified and as directed.

S&F Reinforced concrete pipes, 300mm bore, class NP2, ISI Marked, laid and jointed with collars complete all as specified and as directed.

M&L Cement concrete 1:4:8, type D2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete as specified and as directed.

KSR AND COMPANY

VENKATESH