Supply and Delivery of Mobile Toilet ,Water Tank with Stand, Sitting Chair,Bleaching Powder and Bin in Palani Municipality

RM Excellant 2 - seater modular toilet with each cubicle of size 1220mm X 1220mm X 1980mm and with Sludge tank (capacity-400ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 4-seater) Specifications 1 Number of Compartments 2 - seater modular toilet Type of WC European with ceramic pan Water facility Direct connection from external supply Sewage facility Sludge tank (capacity-400ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 4-seater) ventilation One No. Leech pit provision Yes Civil foundation Required - to be provide by consignee himself Side panel frame material 35mm X 35mm X 5mm(thick) and 5mm X 25mm X 3mm(thick) MS angle (for 2-seater Top(roof) frame material 40mm X 40mm X 5mm(thick)-35mm X 35mm X 5mm(thick) and 25mm X 25mm X 3mm(thick) MS angle Top(roof) support frame structure 40mm X 5mm(thick),35mm X 5mm(thick),25mm X 3mm(thick) MS flat Partition frame material 35mm X 35mm X 5mm(thick),25mm X 25 mm X 3mm(thick) MS angle Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS Door frame material 50mm X 25mm of 14-16gauge rectangular MS hollow pipe Support material for Door panel fixing Aluminium U-channel of 18gauge Door hinges(two numbers) 75mm size with 1.2-1.5mm thickness. Specifications 2 MS Tank holder frame material 25mm X 3mm(thick) MS flat Unit understructure NO legs base Stairs frame material NO stairs Stairs material 25mm X 3mm MS flat Door Tee material 40mm X 40mm x40mm X 5mm(thick) SS Tee Side panel material Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM Top(Roof) panel material Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM Door panel material Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM partition panel material Insulated walls to be made of continue line sandwich panels with 0.35mm thick pre-coated steel sheet(PPGI SHEET) having 120 GSM with minimum 4 microns epoxy primer on both sides of sheet and polyester top coat min 15 microns on both sides of PUF with polyurethane foam(PUF) thickenss-38mm having density 40kg/CUM ±2 kg/CUM Floor material(inside cubical) Fitted with plastic light weight LLDPE roto molded size of each cubical(LXWXH) ± 25mm 1220mm X 1220mm X 1980mm Partition height ± 20mm Stairs size ± 10mm NO MS stairs Overhead tank material Made of PVC Sewage tank material Twin Leech pit with insepction chamber Electric provision By mean of connection from main line Base floor surface(inside) To be suitably slanted towards WC for proper drainage(for Indian WC) Raised platform for passage Width of passage 1220mm and height of passage above ground level 225mm antiskid block finish on passage only oling height 75mm by single brick flat Floor casting 75mm thick PCC of 1:2:4 ratio above brick flat soling Outside plinth plaster 15mm thick on brick work with CM 1:5 Stairs dimension Two Nos. stair of size 250mm(W) X 900mm(L) X 150mm(H) Twin leech pit with inspection chamber 1000mm Dia and 1000mm deep Construction of leech pit made out of 40-50mm thick concrete rings/brick work with sufficient holes Top cover 75mm RCC slab(1:4:8 C:S:A) Dimension(inside) of one inspection chamber 375mm X 375mm X 300mm(depth) Base of chamber 75mm thick PCC in 1:5:10 Finishing of chamber(inside surface) 10mm thick cement plaster in 1:4 Pipe connection To be between Toilet structure-inspection channel and leech pit Brick foundation size 200mm X 200mm with depth of 200mm from ground level for anchor/column locations Pocket to be filled With PCC of 1:2:4 ratio after grouting of steel element of structure Plinth height 300mm with 125mm brick plus 1:5 mortar Platform size 1125mm X 1500mm 1830mm

Supply and delivery and fixing of 2000 litre HDPE tank as per IS 12701 / 1996 including loading, unload ing, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supply and Fixing of 25mm UPVC Tank collar of approved quality with labour charges etc,. Complete.

Supply and Fixing of 25mm UPVC coupling of approved quality with labour charges etc,. Complete.

Supply and Fixing of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 mm dia.

Supply and delivery of dumbler and chain for sintex tank etc complete.

Supply and Delivery of Bleaching Powder inculding labour charges cost and conveyance charges etc completed

Supply and Delivery of Lime Powder inculding labour charges cost and conveyance charges etc completed

Arrangements of Name board letter witiing of sintex tank including cost of painting materials and artist charges etc complete.