ADDN/ALTN/IMP TO SMC AND SPECIAL REPAIRS TO DRAINAGE AT VARIOUS PLACES AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

M&L for Demolition of cement concrete (unreinforced) of any description and in any position including plastering and leeping (whether full thickness including textile coverings, bitumen felt on roofs removed or only a part thereof) complete all as directed.

Demolition of cement concrete of any description laid in any position and Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for and remove the debris out of MOD land complete all as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth of soft/loose soil and getting out and getting out complete.

M & L Cement concrete Type D2 (1:4:8) using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed

M & L Cement concrete Type B-2 (1:2:4) using 40mm aggregate in surface channels and drains complete and all as specified and directed

M & L Cement concrete type B-2 (1:2:4) in foundations, filling and mass concrete finished even and smooth without using extra cement complete all as specfied and directed

M & L PCC 1:2:4 type B0 (12.5 mm graded stone aggregate) as in coping including necessary formwork etc complete all as specified and as directed

M & L PCC 1:2:4 type B1 (20 mm graded stone aggregate) as in benching including necessary formwork for man holes etc complete all as specified and as directed

M& L brick work with fly ash bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:4 etc Complete all as specified and as directed

M&L walling of random rubble masonry uncoursed, well bonded, bedded and solidly hearted in cement mortar 1:6 etc Complete all as specified and as directed

M & L Pre-cast cement concrete block masonry (1:3:6 type C-1 using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width set in CM 1:4, etc complete all as specified and as directed

M &L for Raking out joints/ pointing to random rubble uncoursed/ coursed or brought up to courses built in cement mortar completed all as specified and as directed

M & L Providing, cement concrete (1:2:4) type B-1(using 20 mm graded agg) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) be finished even and smooth (without using extra cement) complete and all as specified and directed

M & L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and directed

M & L Removing excavated material exc. 50m and not exc 250m depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M & L Providing precast reinforce concrete Type B1 (1:2:4) using 20mm aggregates in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed

M & L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed

S & F Framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L preparing new steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.

Roughening surfaces of old concrete roof / floor surfaces by picking, sweeping clean and washing down with water to remove dust,etc

M & L Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces.

Material and labour 40mm average thick PCC nominal mix 1:2:4 type B0 (12.50mm graded stone aggregate) for roof treatment etc.

M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 2% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound

M&L for cleaning the roof, plastered surfaces and applying evenly a priming coat of bitumen primer at the rate of 1.2 kg per Sqm and providing APP based polymeric modified water proofing membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/Sqm) laid on primed surface by forced application and applying two coats of solar reflective bituminous aluminium paint @ 0.1 kg/Sqm per each coat complete all as specified and directed.

Taking down chowkats or frames not exc. 1.5 Sq mtr each with shutters without taking off shutters from the frames complete all as specified and as directed by the Engineer-in-Charge

All as per ser Item No 31 above but exc 1.5 Sqm and not exc 4 sqm each complete all as specified and as directed by the Engineer-in-Charge

Taking down shutters exc 1.0 Sqm and not exc 2 sqm each complete all as specified and as directed by the Engineer-in-Charge

Providing and fixing powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors,windows,ventilators and partitions(fixed portions)with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285 fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions,i.e. at top,bottom and sides with required EPDM rubber/neoprene gasket etc.Alunimium sections shall be smooth,rust free,straight,mitred and jointed mechanically whereever required including cleat angle,Aluminium snap beading for glazing/paneling,CP brass/stainless steel screws, locking arrarangements ,all as specified and directed

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S & F providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame(88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified.

S&F 5.5mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified.

M&L for 12mm thick prelaminated particle board,interior grade,prelaminated both sides with decorative choice laminations fixed with any sections complete all as specified and directed.

Material and labour for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match the shade complete all as specified and directed

S & F 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) Laid in flooring as specified and directed by Engineer In charge.

M&L for non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water and removing the debris out of MOD land etc complete all as directed.

Material and labour for digital coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, in vertical surfaces laid over including 10 mm thick rendering coat/backing layer in CM (1:3) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth (with out using extra cement) complete all as directed

M & L Virified Ceramic double charged tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. over 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and directed

Supply and fix 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and directed

Supply and fix 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and directed

Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and directed

Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed

Supply and fix mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and directed

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed

S&F in repair 25 mm dia anodised alumimium alloy curtain rods with brackets,stops,rollers etc and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair vitreous china ware wash hand basin (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting size 550mm x 400 mm including making good all connections in repairs complete all as directed by the EIC

Supply and fix vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern , seat cover and flush pipe) including provision of lime concrete bedding all as specified and directed.

Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.

S&F for Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all as directed and specified.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

Taking down or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store all as specified and directed.

Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed.

S&F in repair angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fix 15 mm bore PVC connection pipe 45cm long with brass nuts and washers on both ends complete all as in repairs specified and directed.

S&F in repair 15 mm bore CP fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15 mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as directed.

S&F brass CP Shower rose with arms 125 mm size fixed to pipe all as specified and directed.

S&F Sheet glass assembely consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long above WHB.

S&F Brass Chromium plated Tubular towel rail, 20mmdia, D type, 60cm long between flanges all as specified and directed.

Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and directed.

S&F 32mm Dia PVC waste pipe for sinks or wash basins complete all as directed and specified.

S&F in repair Two way taps 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions all as specified and directed.

M&L in repair 15 mm bore fancy type health faucet with SS hose complete all as specified.

Supply and fix Grating doom 125 mm dia with / without waste hole of PTMT (Minimum weight 40gms) and fixed in repairs all as specified and as directed.

Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed.

S&F PVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

Removing excavated material exc. 1.5 m but n.exc 5km and depositing where directed

M & L Mild steel work as in handles of man hole cover slabs, rungs of man holes, straps and similar articles confirming to FE-290 Gde E-165 etc complete all as specified and as directed

M & L Rendering 15mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement.. etc complete all as specified and as directed. NOTE: WPC will be measured and paid separately

M & L precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) set in CM 1:6. including all necessary form work etc complete all as specified and as directed

M&L preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed

M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed

M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer and chalk whiting with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed

M&L for preparation of old painted surfaces of walls and finishing walls with one coat of premium acrylic smooth exterior paint with silicone additives of required shade @ 1.43 Ltr / 10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10Sqm) using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy complete all as specified and as directed.

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping / PVC Conduit pipe of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with modular white colour cover plate with frame or with 3 mm thick laminated sheet fixed with suitable brass screws and cup washers

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket outlet 5 amp point on the independent board

All as per item above 97 but with 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for A/C Plug socket

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

S & F in repairs earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

Supply and fix wall mounted LED Batten fittings extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED (4 feet) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by ENgr-in-charge.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-charge

Supply and fix electric water heater, storage type steel body with inner tank made of ultra thixk super cold rolled steel plates and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece(hot and cold water connection pipe) etc complete all as specified and directed by Engr-in-charge. Make : Havells Monza DX or equivalent of Bajaj or Crompton

Supply and fix stop valve of dia 20 mm with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge.

Supply and fix bib tap of dia 20 mm cast iron alloy with crutch or butterfly handle screwd for iron pipe to outlet pipe of geyser complete all as specified and directed by Engr-in-charge.

Supply and fix of any length GI pipe of dia 15 mm dia including connection sockets, elbow and tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge

M&L for cutting round holes suitable for fixing of exhaust fan of size 250 mm mm into through brick walls / stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge.

Supplying, installing, commissioning and testing of split type air conditioning unit indoor / outdoor complete with cordless remote control unit and with in built with BEE 5 star rating inverter type with CFC refrigerant 1.5 tonne capacity complete and comprising of the following :- a) Room evaporator indoor unit with speed blower fan of approipriate capacity including PCB, thermostatic control, air filter and drain for condensing water b) Outdoor condensing unit of capacity 4900 Kcal / Hr capacity with condensor fan motor of appropriate capacity - 01 No. air cooled condensor of capacity 1.5 TR-01 No. shall be installed outside the building on and including suitable factory made mild steel brackets fixed on wall using fastners for fixing and installing of ACs c) Refrigerant copper pipe of suction and discharge line with insulation, condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including complete wiring for evaporator & condensing unit with fixing of suitable size of copper cable d) Making odd the disturbed surface to match with the existing surface after pluging the holes complete all as specified and directed. Note :- The unit rate quoted by the contractor shall deem to be inclusive of (i) Cutting holes in walls / windows of any thickness for installation of AC, connection and making good the disturbed surface to match with the thickness for installation of AC etc, connection. (ii) Electric cable of size 4 sqmm copper conductor PVC sheathed and of required length to connect outdoor unit and outdoor unit to voltage stablizer. (iii) Copper piping with insulation and drain piping.

Supply and install voltage stabilizer for voltage regulation input 150 - 285 V out put voltage 240 (+/- 2%) suitable for AC of capacity 5 KVA complete including all accessories required for installation as directed by Engr-in-Charge.

Supply and installation of air circulating fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed.

saradhi construction combines

KOGANTI CONSTRUCTION COMPANY

VACON INFRASTRUCTURES

K LAKSHMAN SINGH AND CO

M/S DIVIJA BUILDERS

NEWS CONSTRUCTIONS

M/s D.Krishna Varma