Loading
Loading…
Loading…
Tender Value
₹8.8 L
EMD Value
₹17,600
Closing Date
2 Jun 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
EL/MTC
3 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Contractor has to submit a copy of valid Electrical Contractor License for carrying out installation work of voltage class involved, issued by any State/Central Government along with a supervisor competency certificate and a person holding a permit (Wireman etc.) as per Regulation 29 of the Central Electricity Authority (Measure relating to Safety and Electric Supply) Regulation 2010 or latest / as per Rules 45 of the Indian Electricity Rules 1956 along with the tender documents, failing which the offer is liable to be rejected.
Part-A : Electrification arrangement for Extension of Ward No. 27 Furnishing Depot in RCF Workshop Kapurthala. Part-B: Electrification arrangement for Extension of Ward No. 37 Shell Shop in RCF Workshop Kapurthala.
RCF-EL-MTC-ET-75A-24-25
RCF-EL-MTC-ET-75A-24-25
Open
Works - General
60 Days
Kapurthala, Punjab
₹0
₹17,600
2 Jun 2025
30 Apr 2025
47 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,54,430 | ||
| — | — | — | Above/ Below/Par | ||
| — | 20.00 | — | — | ||
| Supply, installation, testing & commissioning of 4 ways Cable Junction Boxes CRCA powder coated with 20 Amp. connector 3 phase with neutral size not less than 180x180x80 mm with cover on truss at required height complete with fixing arrangement and suitable for 4 Core x 16 SQ MM U/A cable. | — | — | — | 5,970 | |
| — | 20.00 | — | — | ||
| Supply, Replacement, erection, testing and commissioning of Indoor Industrial LED Light 100 watt luminaries fittings model no. BY325P LED100S CW PSE GR FG WB PB of Philips, LHB11- 100-CDL- 60- M of Crompton make As per Explanatory Note. | — | — | — | 96,000 | |
| — | 1.00 | — | — | ||
| Supplying, erecting ,testing & Commissioning of Lighting FDB ,wall/Pillar mounted , made of CRCA sheet steel 1.6 mm, powder coated thickness not less than 40 microns, Incoming 63 Amp SFU front operated with HRC fuses -01nos., Out Going 20 Amp 10 kA SP MCB-10 Nos with suitable DIN rail mounting & Neutral Link Aluminium Bus Bar not less than 15x5mm ,earthing terminals with bolt etc. incoming gland hole for 50Sqmm cable 01 nos at bottom ,Out going Gland hole for 10 sqmm cable 12 nos on top side.(Class of Protection IP-42 ) | — | — | — | 10,560 | |
| — | 400.00 | — | — | ||
| Supply, Laying & fixing of 2 x10 Sq.mm XLPE insulated PVC outer Sheathed aluminum conductor armoured cable suitable for working voltage upto and including 1100 volts conforming to IS: 7098Part-1 )-1988. With amendment number 1&2 &3 reaffirmed 2005.As per Explanatory Note. | — | — | — | 39,800 | |
| — | 30.00 | — | — | ||
| Supplying & making cable End termination of 2 x10 sq.mm Aluminium Armoured PVC/XLPE cable. all material required including double compression brass gland , nuts, bolts, PVC tape crimping lugs etc. complete as required for following sizes of aluminum conductor cables. Make as mentioned only. As per Explanatory Note. | — | — | — | 2,100 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .