GF 2024-25 Purchase of Table and Chair to Engineering Section and Aluminium partition to General section, Cash counter and Town planning section for New office Building in Adirampattinam Municipality.

Amount

Manufacturing, Supply and delivery of Executive table size 6'0"x3'0"x2'6", using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board and 12mm glass, with drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacturing, Supply and delivery of Working table size 4'0"x2'6"x2'6" for General section using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board and 12mm glass, with drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Supply and delivery of Executive Chair (OCV-055) for General section The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Supply and delivery of Office Staff Chair (OCV-016) for General section The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

M.Krishnaveni (BID ID -1339981)