REPAIR/ MAINT TO CERTAIN PATH, HARD STANDING, GARBAGE BIN ETC IN DOMESTIC AREA UNDER GE AF UTARLAI

Amount

Demoliton of cement concrete(unreinforced) of any description & in any position not otherwise specifically provided for and removing debries out of MD land complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as sub base of floor complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for rubber moulded vibratory compacted coloured precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment including dismanting of old paver block complete all as specified and directed.

M&L for rubber moulded coloured Chequered cement concrete tiles with grey cement and pigment 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L two coat of synthetic enamel paint over a coat of primer on new concrete surface of any description over 10cm width or girth,not otherwise described incl prep of new concrete surfaces complete all as specified and directed.

M&L one coat of synthetic enamel paint on old concrete surfsce of any desc over 10cm width or girth,not otherwise described incl prep of old concrete surfaces complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 ( using 20mm graded agg) as in flooring complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B0(using 12.5mm graded aggregate) in steps; plinth courses, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry and precast block masonary for ashlar facings,dressed stonework, precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, complete all as directed.

Taking down cement plaster on brick or stone or pcc block wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate set in CM 1:6, exc. 10 cm in width and setting in CM 1:6complete all as specified and directed.

M&L rendering 15 mm thick, in CM (1:4) on stone masonry surfaces or surface other than fair face of stone masonry or on one side of lathing finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick, in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection complete all as specified.

Dismantling structural steel work in cluding doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F framed work as in doors or gates of angle,mild steel plate or other section with gusset plates , rails , braces, etc complete of Gde Fe-410-W or Gde - E-250, drilling, welding etc for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding complete all as specified and directed.

S&F mild steel work conforming to Fe 310-0 or Fe 410-0 in hold fasts of flat iron ,hooks,pintle hinges,cleats hand made sliding bolts and smilar items complete all as specified.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed .

M&L for applying two coats of synthetic enamel paint over over a coat of red oxide primer on newly surface of steel, description over 10 cm girth or width not otherwise described including preparation of surface complete all as specified and directed.

M/S Tanisha Traders