Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H7₹39.5 L−₹14.1 L (26.1%)Accepted-AOC ANURAGPUR PO PANAGARH BAZAR DIST BURDWAN WEST BENGAL 713 148 | PANAGARH BAZAR | BURDWAN | WEST BENGAL | 713148 | H7 | Accepted-AOC Contract awarded to M/s Unique Enterprises | |
| 2 | H1₹53.8 LRejected-Finance | H1 | Rejected-Finance Higher rate quoted than H7 | |
| 3 | H2₹53.0 L−₹79,744 (1.48%)Rejected-Finance VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | H2 | Rejected-Finance Higher rate quoted than H7 | |
| 4 | H3₹48.2 L−₹5.6 L (10.4%)Rejected-Finance | H3 | Rejected-Finance Higher rate quoted than H7 | |
| 5 | H4₹47.5 L−₹6.3 L (11.6%)Rejected-Finance | H4 | Rejected-Finance Higher rate quoted than H7 |
| Sl No | Description | Qty | Unit | M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd H6 | BISWAS ENTERPRISE H4 | Jaibalaji Enterprise H3 | S S ENTERPRISE H5 | NATIONAL CONSTRUCTION CO H2 | INDIAN CONSTRUCTION H1 | UNIQUE ENTERPRISE H7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00WOODEN/STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following wooden/steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:- | ||||||||||
| 1.10FD/MAP/II/04 Repair of Chair Dinning | ||||||||||
| 1.11 | 12mm ply seat of existing size in its original position all as shown on drg | 110 | Each | 60 ₹6,600 | 77 ₹8,470 | 90 ₹9,900 | 15 ₹1,650 | 100 ₹11,000 | 120 ₹13,200 | 10 ₹1,100 Lowest |
| 1.12 | Front legs made out of Teak wood well seasoned in existing shape and size | 58 | Each | 65 ₹3,770 | 77 ₹4,466 | 90 ₹5,220 | 15 ₹870 | 120 ₹6,960 | 125 ₹7,250 | 10 ₹580 Lowest |
| 1.13 | Rear legs made out of Teak wood well seasoned in existing shape and size | 64 | Each | 68 ₹4,352 | 77 ₹4,928 | 90 ₹5,760 | 15 ₹960 | 110 ₹7,040 | 125 ₹8,000 | 10 ₹640 Lowest |
| 1.14 | Front rail of seat frame made out of Teak wood well seasoned in existing shape and size | 62 | Each | 68 ₹4,216 | 80 ₹4,960 | 90 ₹5,580 | 15 ₹930 | 110 ₹6,820 | 125 ₹7,750 | 10 ₹620 Lowest |
| 1.15 | Side rail of seat frame made out of Teak wood well seasoned in existing shape and size | 50 | Each | 70 ₹3,500 | 80 ₹4,000 | 90 ₹4,500 | 15 ₹750 | 110 ₹5,500 | 125 ₹6,250 | 10 ₹500 Lowest |
| 1.16 | Back rail made out of Teak wood well seasoned in existing shape and size | 54 | Each | 70 ₹3,780 | 88 ₹4,752 | 90 ₹4,860 | 15 ₹810 | 110 ₹5,940 | 100 ₹5,400 | 10 ₹540 Lowest |
| 1.17 | Short stiffener made out of Teak wood well seasoned in existing shape and size | 120 | Each | 70 ₹8,400 | 88 ₹10,560 | 90 ₹10,800 | 15 ₹1,800 | 110 ₹13,200 | 130 ₹15,600 | 10 ₹1,200 Lowest |
| 1.18 | 75mm thick 32 density cushion and covered with new tapestry cloth duly stitched. | 140 | Each | 750 ₹1,05,000 | 755 ₹1,05,700 | 760 ₹1,06,400 | 800 ₹1,12,000 | 790 ₹1,10,600 | 800 ₹1,12,000 | 700 ₹98,000 Lowest |
Tender Value
₹44.8 L
EMD Value
₹90,000
Closing Date
6 Nov 2025, 6:00 pmClosed
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DISTT- BURDWAN, STATE-WEST BENGAL PIN-713420
All as per BOQ
2025_MES_735454_1
8500-428/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
As per tender documents
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,000
8 Dec 2025
16 Oct 2025
7 Nov 2025
16 Oct 2025
6 Nov 2025
30 Oct 2025
Amount
WOODEN/STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following wooden/steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:-
FD/MAP/II/04 Repair of Chair Dinning
12mm ply seat of existing size in its original position all as shown on drg
Front legs made out of Teak wood well seasoned in existing shape and size
Rear legs made out of Teak wood well seasoned in existing shape and size
Front rail of seat frame made out of Teak wood well seasoned in existing shape and size
Side rail of seat frame made out of Teak wood well seasoned in existing shape and size
Back rail made out of Teak wood well seasoned in existing shape and size
Short stiffener made out of Teak wood well seasoned in existing shape and size
75mm thick 32 density cushion and covered with new tapestry cloth duly stitched.
Back rest batten
PVC Shoe
Table Bed Side (MAP )
Top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top. here-in-before but for TableBed side
Handle of table Bed side chromium plated 75 mm ' D' Type as approved/directed by Garrison Engineer
Drawers made of 1st class hard seasoned teak wood free from knots duly french polished..
Stainless steel telescopic channel as approved/directed by Garrison Engineer
MS legs ( 650 x 25 x 25 mm ) made out of 25mm x 25mm MS tube 1.6mm thick thickness all as shown on drg.
Ply wood (back of the Table bed side MAP) made out of 6mm green ply BWR commercial and fixing the same in its original position as per drg.
Tightening of complete steel frame of Table bed side by the help of scew or by welding and making functional.
PVC Shoe
Sleeping Bunk Steel (Single men) W/Ply
Pre laminated particle board for head board frame (Size of Board : 610mm x 330mm)
Pre laminated particle board for foot board frame (Size of Board : 610mm x 220mm )
Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.
Stiffner middle made out of 25mm x 25mm, MS tube of 1.6mm wall thickness. All as directed by Engineer-in-Charge and shown on drg.
PVC Shoes
FD-1008 Table 900 x 600 x 760 mm Steel W/Drawer
Top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top
Internal locks 40mm 4 lever with duplicate keys of approved quality.
Drawer of existing size and shape made out of MS sheet 1.00mm thick
Necessary welding in drawer to make functional as per existing size and shape. All as shown on drg.
PVC shoe
FD-279 Chair Dinning
Front Legs, made out of 1st class HW well seasoned (Teak)
Rear Legs, made out of 1st class HW well seasoned (Teak)
Front rail of seat frame (Hole should be 12.5mm apart of each other), made out of 1st class HW well seasoned (Teak)
Side Rail, made out of 1st class HW well seasoned (Teak)
Back Rail, made out of 1st class HW well seasoned (Teak)
Short stiffener, made out of 1st class HW well seasoned (Teak)
Back rest batten, made out of 1st class HW well seasoned (Teak)
Supply and weaving with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approved by GE
PVC Shoes
FD-1029 Locker Steel/ Locker Bed Side
Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing
Hasp & stappples of size 150 mm long chromium plated
Handle of size 100 mm long 'D' Type chromium plated
Hanging rod made out of 20mm dia chromium plated pipe 500mm long
FD-241 side board
Leg made out of 1st class teak wood well seasoned
Stainless steel handle 50mm
Plywood 6mm thick BWR for back
Shutters made out of 18mm thick particle board exterior grade one side teak face and other side balancing white
Shelves made out of 18mm thick particle board exterior grade one side teak face and other side balancing white
Drawers made of 1st class hard seasoned teak wood free from knots
Top made out of prelaminated particle board one side teak face and other side commercial/balancing white exterior grade with french polished teak wood edging all around
FD-284 Table 900x600x760mm without drawer/with drawer FD- (FD-42(m) ,FD-41(m) FD-291, FD-284,FD-283)
Top made out of 18/19mm thick prelaminated particle board one side teak veneered with standard PVC edging all around the top.
Legs (size 740x60x30mm) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg
Long rails (740x25x65mm) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg
Side rails (size 440x25x65mm) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg
Side stiffiner (740x25x130mm) made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg for FD/41/FD-284
Drawer made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg
PVC Shoes as directed by Engineer-in-Charge and shown on drg.
FD/MAP-II/03 Table dining 6 Pers (MAP )
Table top made out of 18/19mm thick prelaminated particle board one side teak veneered with teak wood beading all around
Leg of size 750x45x90mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws
Long rail of size 1500 x 45 x 90 mm made out of 1st class well seasoned teakwood
Short top rail of size 900 X 45 X 90 MM . made out of 1st class well seasoned teakwood
MS Right angle of size 150 x 30 x 5 mm
PVC Shoes
FD/E6/MAP/ 16 Mirror Dressing Gents
Looking mirror of size 1130x530x5.5 mm thick silver coated
Glass shelf of size 5.5mm thick
Back ply of mirror dressing gents of size 1170mmx540mmx6mm thick 5 ply BWR grade
Stainless Steel Handle 50mm as approved/directed by Engineer-in-Charge and fixing the same in its original position.
Stainless Steel picture clip as approved/directed by Engineer-in-Charge and fixing the same in its original position.
FD-278 Teapoy
Top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around Size of particle board shall be 450mm x 300 mm.
Legs of existing shape and size made of 1st class hard seasoned teak wood free from knots
Top rail made of 1st class hard seasoned teak wood free from knots .
Short rail made of 1st class hard seasoned teak wood free from knots .
PVC shoes
FD-275 Table writing
Top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around
sides made out of 19mm prelaminated particle board one side teak veneered
Shutter made out of 19mm thick prelaminated particle board one side teak veneered bonded with phenol formaldehyde exterior gde
drawers made out of prelaminated particle board & 1st class well seasoned teakwood for sides and front & 6mm thick commercial plywood for bottom of drawers
MS butt hinges 50mm medium wt cold rolled mild steel.
stainless steel handle 50mm
plywood back of table writing & supply & fix new 6mm thick 5 ply plywood commercial BWR gde type BB fixed with 20mm mild steel screws
legs made out of 1st classs well teak wood
long rail made out of 1st class well seasoned teak wood
short rail made out of 1st class well seasoned teak wood
long stiffiner made out of 1st class well seasoned teak wood
Short stiffiner made out of 1st class well seasoned teak wood
PVC shoes
FD/MAP-II/01 Charpoy Hard Top MAP
Ply-wood top of Size 1980X900X12mm thick, Commercial grade (07 ply) ISI Marked with beading all around, with and including 10 Nos galvanised countersunk nut andt Bolt of suitable size and length, 02 Nos washer for each nut and bolts as directed by Engr-in-Charge.
Stiffner middle made out of 25mm x 25mm, MS tube of 1.6mm wall thickness. All as directed by Engineer-in-Charge and shown on drg.
PVC Shoes. All as directed by Engineer-in-Charge and shown on drg.
FD-281 Sofa set 2 Seater
Front legs made out of Teak wood well seasoned in existing shape and size
Rear legs made out of Teak wood well seasoned in existing shape and size
Front rail made out of Teak wood well seasoned in existing shape and size
Back rail made out of Teak wood well seasoned in existing shape and size
Arm rest made out of Teak wood well seasoned in existing shape and size
Back wooden bearers made out of Teak wood well seasoned in existing shape and size
Bottom wooden bearers made out of Teak wood well seasoned in existing shape and size
Cushion 100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched.
FD-281 Sofa set (3+1+1) Seater
Front Leg made out of Teak wood well seasoned
Rear Leg made out of Teak wood well seasoned
Front Rail (long sofa) made out of Teak wood well seasoned
Back Rail (long sofa) made out of Teak wood well seasoned
Front Rail (single sofa) made out of Teak wood well seasoned
Back Rail (single sofa) made out of Teak wood well seasoned
Arm Rest made out of Teak wood well seasoned
back wdn bearers made out of Teak wood well seasoned
bottom wdn bearers made out of Teak wood well seasoned
100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched
FD-274 Table Centre.
leg made out of 1st class teak Wood seasoned of size 60x30x356mm
top rail made out of 1st class hardwood teak of size 20x50x900mm
Short rail of size 20x50x450mm and shape made out of 1st class HW well seasoned teak
PVC shoes
FD-233 Hat Stand
looking mirror of size 460x300mm 5.5mm thick
Board made out of 19mm thick prelaminated particle board one side teak face
brass peg hook
FD-229 chair Easy
Front Legs made out of 1st class HW well seasoned (Teak)
Front rail of seat frame (Hole should be 12.5mm apart of each other), made out of 1st class HW well seasoned (Teak)
Side Rail, made out of 1st class HW well seasoned (Teak)
Back Rail, made out of 1st class HW well seasoned (Teak)
Arm Rest, made out of 1st class HW well seasoned (Teak)
Supply and weaving with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approved by GE
FD/MAP-II/03 Table dining 8 Pers (MAP )
Top made out of 18/19mm thick prelaminated particle board one side teak veneered with standard PVC edging all around the top.
Legs of size 750x45x90mm made out of 1st class well seasoned teakwood
long rail of size 1800 x 45 x 90 mm made out of 1st class well seasoned teakwood complete all as directed and shown on drg.
Short top rail of size 900 X 45 X 90 MM .made out of 1st class well seasoned teakwood complete all as directed and shown on drg.
MS Right angle of size 150 x 30 x 5 mm with mild steel screws complete all as directed & shown on drg.
PVC Shoe
FD-1009 Table 900 X900 X 760 mm steel
Top made out of 18/19 mm thick pre-laminated particle board (ISI Marked) exterior grade one side teak veneered finish and other side having balancing white lamination with 19 x 4 mm teakwood beading all around the top and polishing the wooden frame shall be with french polish(to the entire satisfaction subject to minimum two coats) including preparation of surfaces by scrapping /smoothing the surface all specified and shown on drawing .
Electric welding to the broken /dislocated 25 x 25 mm square tube rails of tables 900 x900x 760 mm steel , length of welding exceeding 2.5 cm but not exceeding 5 cm ( each spots measured separately) thickness of metal to be welded not exceeding 6 mm , complete all as directed.
Rubber shoes off approved quality and tightly fitted and the bottom of legs all as specified and shown on drawing
FD-1028 Book Case Steel 4 door
Door made out of 1.00mm thick MS Sheet
Sliding Roller with MS Channel 1.25mm thick
Glass 3mm thick
Handle Stainless Steel 100mm
Shelf made out of MS sheet 1.00mm thick. All as shown on drg.
Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate
FD-1028 Book Case small Steel
Door made out of 1.00mm thick MS Sheet
Sliding Roller with MS Channel 1.25mm thick
Glass 3mm thick
Handle Stainless Steel 100mm
Shelf made out of MS sheet 1.00mm thick. All as shown on drg.
Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate
FD-1033 Almirah steel large 1/2H x 1/2 Sh
Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing
Handle chromium plated heavy duty
Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate
3 way locking device
Leg made out of MS sheet 1.00mm thick
Hanging rod 15mm dia made out of stainless steel
Shelf of existing size and shape made out of MS sheet 1.00mm thick
FD/E6/MAP/05 Chair School with hand board
One piece PVC Back and Seat as per drg.
18mm pre laminated particle board top openable with PVC edging screwed 25mm hole steel pipe inserted in 20mm MS rod welded to frame as per drg.
Busket below the seat shall be made of 5mm dia 7 Nos mild steel rod made to shape as shown on drg.
PVC Shoe
FD/E6/MAP/02(R) Rack Shoe Steel
3mm dia CR Rod of length 300mm
25mm dia CR Pipe
3mm dia CR Rod of length 700mm
PVC Shoe fixed with MS Screw
Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY/BLACK OR AS APPROVED by GE paint both inside and outside (outside only in case of round/square pipe/tube) by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture/TP furniture :- (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE
FD/MAP-II/15 (R) Table Bed Side (MAP)
Sleeping Bunk Steel (Single men) W/Ply
FD-1008 Table 900 x 600 x 760 mm Steel W/Drawer
FD-1029 Locker Steel/ Locker Bed Side
FD/MAP-II/01 Charpoy Hard Top MAP
FD-1009 Table 900 X900 X 760 mm steel
FD-1028 Book Case Steel 4 door
FD-1028 Book Case small Steel
FD-1033 Almirah steel large 1/2H x 1/2 Sh
FD/E6/MAP/05 Chair School with hand board
FD/E6/MAP/02(R) Rack Shoe Steel
Material and Labour for Complete removal of total existing painting/polish and applying two coats of high gloss polyurethane enamel paint (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss)by spray painting method over and including a coat of pink primer and prepration of surfaces Complete all as specified and as directed for the following furnitures :-
FD/MAP/II/04 Repair of Chair Dinning
FD-279 Chair Dinning
FD-241 side board
FD-284 Table 900x600x760mm without drawer/with drawer FD- (FD-42(m) ,FD-41(m) FD-291, FD-284,FD-283)
FD/E6/MAP/ 16 Mirror Dressing Gents
FD-278 Teapoy
FD-275 Table writing
FD-281 Sofa set 2 Seater
FD-281 Sofa set (3+1+1) Seater
FD-274 Table Centre.
FD-233 Hat Stand
FD-229 chair Easy
FD/MAP-II/03 Table dining 6 Pers (MAP )
FD/MAP-II/03 Table dining 8 Pers (MAP )
NATIONAL CONSTRUCTION CO (BID ID -3468759)
Jaibalaji Enterprise (BID ID -3468607)
BISWAS ENTERPRISE (BID ID -3468574)
S S ENTERPRISE (BID ID -3468667)
M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd (BID ID -3468542)
UNIQUE ENTERPRISE (BID ID -3468901)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
PS-428.pdf
Tender Documents • 0.80 MB
BOQ_823550.xls
BOQ • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .