Loading…
Loading…
Tender ID
Tender Value
₹11.1 L
EMD Value
₹22,240
Closing Date
30 Mar 2026, 6:00 pmClosed
CWE Jalandhar Cantt
HQ CWE Jalandhar Cantt PIN 144005
Special repairs of existing road approximate length 174 Mtr Inside the unit perimeter of 106 I Comp Pl ASC at New Mil Stn Kapurthala
2026_MES_753164_1
8325/95/E8
Open Tender
Civil Works
Item Rate
90 days
HQ CWE Jalandhar Cantt
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
GE Kapurthala
₹22,240
Yes
2 Mar 2026
2 Mar 2026
1 Apr 2026
2 Mar 2026
30 Mar 2026
16 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material and labour for preparing existing black top surfaces with wire brushes for removing cake, mud etc sweeping with brooms and finally fanny the cleaned surfaces with gunny bags/air compressor to remove all losse dirt and applying evenly a priming/tack coat with paving bitumen VG-10/ cold emulsion at the erate of 5 kg per 10 sqm on road surfaces. Laying rolling, consoliding, 30mm thickness of bitumen premixed semi dense ashphaltic concrete with 5.5% binder content of bitumen grade VG-30 by weight of total mix laid with mechanical paver,roller and completed to required camber gradient with pressure roller and 8 to 10 tonne power roller and be achieved a uniform smooth pneumatic roller complete all as specified and directed by Engr-in-charge. | 263 | X Sqm | - | - |
| 2 | Repairs to pothholes any depth, not exc 1 sqm each including, sweeping free from dust and mud or water, scooring suncken surfaces in roads,paths etc cutting around edges atleast 25mm in depth and applying tack coat with paving bitumen VG-10 at the rate of 5 kg 10 sqm, making good by filling in screed and grade road metal watering and well ramming(including supply of road metal). | 20 | X Sqm | - | - |
| 3 | Material and labour for proving and marking 2.5mm thick broken centre line/side line/zebra lines, dashes,arrow etc on road pavement and the like of any description and width with hot thermoplastic paint hot applied with machine conforming to BS-3 all as specified and directed by Engr-in-charge. | 45 | Sqm | - | - |
| 4 | S&F in repairs cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA strips lens with reflector fixed with and including MS Stud of suitable size as per manufacruers instruction of approved make by GE. | 12 | Each | - | - |
| 5 | Supply and Fix solar cat eye aluminum alooy shall (100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm (shank 65 mm) of high efficiency mono rystafied solar panel 2.4v/0.3 watt one NI-ed rechargeable battery (1.2v/1600 MA) consisting of super bright LED with 10000-18000 mcd complete atll as manufacturer instructions of approved make by GE. | 29 | Each | - | - |
| 6 | Demilition of Concrete in ground floors (unreinforced) and pavings n exc 15 cm thickness (below or above ground level) | 9 | Cum | - | - |
| 7 | M&L for Cement concrete(1:4:8) type D-2 (using 40mm graded crushed stone agg) as in foundation, filling and mass mass concrete complete all as specified and directed by Engr-in-charge. | 9 | Cum | - | - |
| 8 | M&L for 25mm fine Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge. | 2 | Cum | - | - |
| 9 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigment all as specified and directed. | 60 | Sqm | - | - |
| 10 | M&L for Pre-cast cement concrete block masonry with solid blocks(30x20x10cm) as in edging type B-1 1:2:4 (20mm graded agg) , exc. 10 cm in width and setting in mortar, complete all as specified and directed by Engr-in-charge. | 2.7 | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
Tenderdocu.pdf
Tender Documents • 1.68 MB
BOQ_845595.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .