CONSTRUCTION OF CATERING TRAINING BLDG WITH INTEGRATED WORKS STATIONS AND ANCILLARY FACILITIES (PH-I OF TWO PHASES) (SPECIAL WORK) AT BANGALORE

Amount

Lump sum price worked out by the tenderer for BUILDINGS / STRUCTURES as listed in Schedule ‘A’ Part-I

Lump sum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-II

Lump sum price worked out by the tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-III

Lump sum price worked out by the tenderer for ROAD / FOOT PATH /CULVERT as listed in Schedule ‘A’ Part-IV

Lump sum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-V

Lump sum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI

Lump sum price worked out by the tenderer for RAIN WATER HARVESTING as listed in Schedule ‘A’ Part-VII

Lump sum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-VIII

Lump sum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-IX

Lump sum price worked out by the tenderer for SOLAR WATER HEATER as listed in Schedule ‘A’ Part-X

Lump sum price worked out by the tenderer for CHAIN LINK FENCING WITH WICKET GATE as listed in Schedule ‘A’ Part-XI

SCHEDULE 'A' PART XII (DIESEL GENERATOR SET 250KVA) Note: This schedule is not pre-priced by MES.

Supply, install, test and commissioning of silent Diesel Engine Generating set 250 KVA, 415 Volts, 3 phase, 4 wire engine as per IS : 10001/10002 conforming to CPCB Norms II, water cooled, BHP 310 @ 1500 RPM, 6 Cylinder, fuel tank capacity 460 Ltr and alternator as per IS : 13364 at site complete with control panel having meters, sound proof canopy as per latest CPCB norms II with suitable emission control device confirming to latest NGT norms etc including all accessories as per manufactures standard and as per the details given below and independent relay panel for automatic on mains failure :- AC Generator should be suitable for ambient conditions at Bangalore and confirming to IS and complete all as per Item No 1 of SCHEDULE 'A' Part XII on Serial page no. 65(R), 65A(R) & 66.

SCHEDULE 'A' PART XIII (FREEZER CUM CHILLER AND OVEN) Note: This schedule is not pre-priced by MES.

Supply ,installation, testing and commissioning of vertical freezer (-18 degree Celsius) cum chiller (+4 degree Celsius) combined unit with twin compressor , outer body made of 20 SWG SS (304)( 4'-6"x2'-8"x6' ht) (Tata/ Sail/ Jindal) of capacity 1200 ltr, 4 door ( 2 for freezer and 2 for chiller) , with central partition inner storage chambers ( 20 SWG SS 304 grade) (Tata/ Sail/ Jindal) insulated with PUF solution above the copper pipe windings (Static coil cooling system) for freezer compartment & air cooling ventilated system for chiller compartment, with automatic defrost, digital thermostat, temp LED display, run by compressor system (Emerson, Danfoss) complete with all accessories . Make : Model RC 1390E for Chiller and RF 4D1390E for freezer in Make Blue Star or any other techno commercially equivalent of other approved make.

Supply, install, testing and commissioning fully automatic double deck oven, Gas heated, with digital temperature for each burner and timer, 10 tray capacity in each deck (10+10=20 trays), digital temperature controller for top & bottom with timer, Fully automatic burner operation through microprocessor controllers . Material : outer & inner SS 402 grade Chamber size : 62"W x 31"D x8"Ht Deck Outer dimension : 82"W x 38"D x 50"Ht , Tray size : 12"x15" with leg wheels Make: Jomind, Dolar Engg Bangalore, continental Delhi or techno economical equivalent of other specified makes

Note For Schedule 'A' Part XIV & XV: All work has to be executed under the close supervision of OEM only.

SCHEDULE 'A' PART XIV (KITCHEN SYSTEM B/R) Note: This schedule is not pre-priced by MES

Supply, installation, commissioning and testing of COOKING RANGE WITH HOT PLATE & 1 UNDER SHELF OF SIZE 48" x 30" x 34" + 6 " with following specification :- (a) 16 SWG (304) (Tata, sail, Jindal) SS on top with front turned down and cut out to receive gratings. (b) 32 x 32 x 3 mm SS angular framework fully welded. (c) 4 Nos 10" x 10" heavy duty cast iron removable vessel rest. (d) 4 Nos G-22 burner with pilot and controls SWG 20 (304) SS Spillage tray (e) 12" x 12" x 3/4" MS plain plate with 1 No V type burner (f) manifold 1/2" dia provided on both side. 150 mm raised splash back. (g) Four numbers 38 mm 16 SWG (304) SS square tubular legs with heavy duty nylon adjustable bullet feet. (Matt Finish) Make:- Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, installation, commissioning and testing of SPREADER TABLE WITH SPLASH & UNDER SHELF of size 60" x 24" x 34" + 6" with following specification:- (a) 16 SWG (304) (Tata, sail, Jindal) SS top, double beaded on all sides and secured to 32 x 32 x 3 mm SS angle welded frame work. (b) One 18 SWG (304) SS bottom shelf starting at 150 mm height, raised 150 mm splash back. (c) Four nos 38 mm SS square tubular legs with heavy duty nylon adjustable bullet feet. (Matt Finish) Make:- Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, installation, commissioning and testing of WORK STATION WITH SINK & UNDER SHELF of size 60" x 30" x 34" + 6 " with following specification :- (a) 16 SWG (304) (Tata, sail, Jindal) SS top, double beaded on all sides and secured to 32 x 32 x 3 mm SS angle welded frame work. (b) Sink size 18" x 18" x 12" deep sink integral with top sheet, 1-1/2" dia drain coupling and swan neck tap (Brand - Jaguar, cera, jal or equivalent) 150mm splash rear side. (c) 18 SWG (304) SS sheet 2 under shelf, 18 SWG (304) SS Sheet 3 sides covered and 4 Nos 38 mm 16 SWG (304) SS square tubular legs with heavy duty nylon adjustable bullet feet. (Matt Finish) Make:- Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, installation, commissioning and testing of SS CLADDING PARTITION WALL BETWEEN THE WORKSTATION FOR 4 CLASS ROOMS. Specification : (a) Size of partition wall structure : Each line - (36' Length x 10" width x 4'-3" height) (b)Partition wall frame : 25 x 25 Square pipe 16 SWG 304 Grade (c)Number of partition wall lines for 4 rooms : 12 Partition wall (d)Lines SS Cladding sheet : 18 SWG (304) (Tata, sail, Jindal) mat finish. (e) Size of SS Cladding sheet : Each line 36' Length x 1'-9" ht Make:- Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, installation and commissioning of 18mm THICK GRANITE FIXING ABOVE THE SS PARTITION FRAME STRUCTURE. Colour of granite : Jet black granite Size of granite : 4' Length x 1' width / 5' Length x 1' width Make:- Dolar Engg Bangalore, SG Bangalore, Continental Delhi

SCHEDULE 'A' PART XV (KITCHEN SYSTEM E/M) Note: This schedule is not pre-priced by MES

Supply installation , testing and commissioning of Deep Fat fryer table top model (single container tank electrically operated) of size 8.5"x15"x14" with following specification:- (a) 18 SWG (304) ( Tata, Sail, Jindal) SS top, 20 SWG (304) SS sides covered. (b) 2KW heating element ( Single phase) with on/off switch, indicators and thermostat. (c) Four Nos 25mm Square SS tubular legs with heavy duty nylon adjustable bullet feet. ( Matt Finish). Make : Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, Erection, Installation, Commissioning and testing of kitchen hood (Exhaust hood size length 8' x Width 8'x 1'-8" height) made of SS matt finish ceiling mounted Box type for cooking range with removable 22 SWG (304) grade (Tata, SAIL, Jindal or equivalent) SS grease stop filters and fixing bracket ,Oil drain channel, Hoods made out of 20 SWG 304 grade SS Sheet, LED lighting 4 Nos (Philips, Polycab, Havells or equivalent) complete length of exhaust hood , oil collecting tray 18 SWG SS 304 grade- 2 Nos. (Matt finish) Make : Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, Erection, Installation, Commissioning and testing of kitchen hood (Exhaust hood size length 4' x Width 4'x 1'-8" height) made of SS matt finish ceiling mounted Box type for cooking range with removable 22 SWG (304) grade (Tata, SAIL, Jindal or equivalent) SS grease stop filters and fixing bracket ,Oil drain channel, Hoods made out of 20 SWG 304 grade SS Sheet, LED lighting (Philips, Polycab, Havells or equivalent) complete length of exhaust hood , oil collecting tray 18 SWG SS 304 grade- 2 Nos. (Matt finish) Make : Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, Erection, installation, commissioning and testing of exhausting ducting for 04 Nos Practical Hall, cooking range of size (895 x 300 mm) made of GI Sheet 20 SWG (Tata, sail, Jindal) provided in side the kitchen hall and connecting with the ceiling mounted exhaust hood upto outside of Kitchen hall terrace with fixing bracket. Make : Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, Erection, installation, commissioning and testing of exhaust Air Motor driven Blower for 04 nos Practical Hall, cooking range of capacity (5 HP, 440V, 3 Phase, 960 RPM, 7500 CFM, static Pressure 95mm) including connecting with exhaust ducting and suitable electric cable, starter (Make of starter L&T, Legrand, Schneider) Make of Motor :- Crompton, ABB or Siemens. Make : Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, Erection, installation, commissioning and testing of fresh air ducting for 04 Nos Practical Hall, cooking range of size (720 x 300 mm) made of GI Sheet 20 SWG (Tata, sail, Jindal) provided in side the kitchen hall and connection with the ceiling mounted exhaust hood upto outside of Kitchen hall terrace with fixing bracket. Make : Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, Erection, installation, commissioning and testing of fresh air motor driven Blower for 04 Nos Practical Hall, cooking range of capacity (3 HP, 440V, 3 Phase,960 RPM, 7200 CFM, static Pressure 50mm) including connecting with exhaust ducting and suitable electric cable, starter (Make of starter L&T, Legrand, Schneider) (Motor make Crompton, ABB or Siemens) . Make : Dolar Engg Bangalore, SG Bangalore, Continental Delhi

Supply, installation, commissioning and testing of fresh air grill made of Aluminium (White powdered coated) of size 16"x 8"x4"ht

Supply, Erection, installation of MS Structure platform for placement of fresh air blower, platform structure size 20'x5' x7' with following specification :- (a) Frame structure- MS Angle frame 50mmx50mmx 6mm thick (b) Pillar - 'C' channel-100mmx75mmx6mm (c) MS sheet - 3mm thick plate platform provision for blower placement (c) All surfaces shall be painted with two coat of synthetic enamel paint over a coat of primer. Make:- Dolar Engg Bangalore, SG Bangalore, Continental Delhi.

Supply, Erection, installation of MS Structure platform for placement of Exhaust blower, platform structure size 30'x5' x7' with following specification :- (a) Frame structure- MS Angle frame 50mmx50mmx 6mm thick (b) Pillar - 'C' channel-100mm x75mmx6mm tk (c) MS sheet - 3mm thick plate platform provision for blower placement (c) All surfaces shall be painted with two coat of synthetic enamel paint over a coat of primer. Make:- Dolar Engg Bangalore, SG Bangalore, Continental Delhi.

Material and Labour for Gas line for 100 cooking range supply installation and commissioning and lay SS 304 seamless pipe of 3.25 mm thick for LPG line with all accessories and pipeline concealed below floor and pressure gauge, regulator, isolating ball valve etc. complete all as specified and as directed. Note:- Rate quoted shall be inclusive of fixing charges of pressure gauges, regulator , isolating ball valves, flexible LPG safety hoses, however the pressure gauges, regulator, isolating ball valves, flexible LPG safety hoses , gas manifold used will be measured and paid separately under relevant items as supply only. Make:- Dolar Engg Bangalore, SG Bangalore, Continental Delhi.

Supply only LPG Suraksha flexible connection hose 1.5Mtr Length with necessary clamps and bolts.

Supply only LPG commercial flange valve of main line all as per engr-in-charge.

Supply only LPG commercial pressure valve 30 psi all as per engr-in-charge.

Supply only LPG commercial pressure valve 20 psi all as per engr-in-charge.

Supply only LPG commercial low pressure regulator all as per engr-in-charge.

Supply only LPG commercial (6+6) manifold system all as per engr-in-charge.

Supply, installation, testing and commissioning of Cold room (Freezer & Chiller room) of approx room size (15' x 15')of specification as mentioned herein below. Make :- Ice Make Refrigeration Limited/ Celfrost/ Rinac

Cold room for frozen food items (Freezer) Pre fabricated panels for cold room-CR-12 MM 1) Cold Room Outer Size (Ft):- 110.25" X 173.5"x97.2" (W x D X H) 2) Total Storage Volume - 793 Cubic Feet 3) Product - Frozen Food 4) Product Storage - 1500 Kg 5) Room Temperature - -20 deg C to -22 deg C 6) Product incoming Temp - -2deg C to 4 deg C 7) Pull Down Time - 10Hr 8) Product Turn Over - 20% of Total Storage 9) Man Occupancy Per Day - 2 Person for 20 Min 10) Panel construction - Prefabricated sandwich PUF panels with Cam lock & rubber gaskets. All panels fit together by cam lock. Panel with grooves to increase the strength. 11) Panel Thickness:- 125mm PUF (Poly urethane foam), Density 40 + 2 Kg/m3 PUF Blowing Agent - 141 B (CFC Free) 12) Panel Surface Material - 125 mm PUF Panel with both SS-304 sheet of 0.5 mm thickness. 13) Floor Insulation - 125mm PUF Panel with outside pre coated GI sheet & Inside 9 mm marine ply for Aluminium checkered Plate, sheet Thickness 2.0mm. 14) Door Accessories :- Flush type swing door with heavy duty Imported Hardware like Hinges, Handle & Door closer Door frame in Heavy duty PVC profile

Refrigeration system for frozen food ICL-13-SET-EMERSON-SCROLL 1) REFRIGERATION UNIT MODEL - ICL - 13 2) REFRIGERATION UNIT TYPE - AIR - COOLED SPLIT TYPE 3) NO OF REFRIGERATION UNIT :- 1 SET 4) CONDENSER TYPE - AIR COOLED ALUMINIUM FINE &COPPER TUBE 5) COMPRESSOR MAKE - EMERSON MAKE OR EQUIVALENT 6) COOLING CAPACITY - 3.880KW/HR (EACH UNIT) 7) COOLING CAPACITY BASED ON - 27 DEG c EVA & 50 DEC C CON TEMPERATURE 8) EVAPORATOR UNIT - "ICE MAKE" MAKE MODE NO S4024-353H (SS CANOPY) 9) EVAPORATOR COIL - ALUMINIUM FIN & COPPER TUBE TYPE 10)REFRIGERANT - R404a 11) CONNECTED POWER LOAD - 3.98 KW/HR (EACH UNIT) 12) POWER SUPPLY - 440v, 50HZ, 3Phase 13)DEFROSTING METHOD - ELECTRICAL HEATER

Ante Room for Vegetables storage Pre fabricated panels for cold room - CR-60 MM 1) Cold Room Outer Size (Inch) - 64.25" x 173.5" x 97.20" (W x D x H) 2) Total Storage Volume - 524 Cubic Feet 3) Product - Vegetables 4) Product Storage - 1500 Kg 5) Room Temperature - 2 deg C to 8 deg C 6) Product incoming temp - 26 deg C to 30 deg C 7) Pull Down Time - 20 Hr 8) Product Turn Over - 20% of Total Storage 9) Man Occupancy Per Day - 2 Person for 20 Min 10) Panel construction - Prefabricated sandwich PUF panels with Cam lock & rubber gaskets on all sides. All panels fit together with camlock. Panel with grooves to increase the strength. 11) Panel Thickness - 60 mm PUF (Poly urethane foam), Density 40+2 Kg /m3 PUF Blowing Agent -141B (CFC free) 12) Panel Surface Material - 60 mm PUF Panel both side SS-304, Sheet Thickness 0.5mm. 13) Floor Insulation - 60 mm PUF Panel with outside pre coated GI Sheet & Inside 9 mm marine ply for Aluminium checkered Plate, sheet Thickness 2.0mm 14) Door Accessories - Flush type swing Door with Heavy duty Imported Hardware like Hinges, Handle & Door closer. Door Frame made in Heavy duty PVC profile & Push type Gasket to stop air loss & easy operation for long life. 15) Door Opening size & Nos - Door opening size 34" x78' (W x H)

Refrigeration system for vegetables ICM-000 -SET-EMERSON-HERMETIC 1) REFRIGERATION UNIT MODEL - ICM-09 2) REFRIGERATION UNIT TYPE - AIR - COOLED SPLIT TYPE 3) NO OF REFRIGERATION UNIT :- 1 SET 4) CONDENSER TYPE - AIR COOLED ALUMINIUM FINE &COPPER TUBE TYPE 5)COMPRESSOR MAKE - EMERSON MAKE OR EQUIVALENT 6) COOLING CAPACITY - 2300KW/HR 7) COOLING CAPACITY BASED ON - -8 DEG C EVA & 50 DEC C COND TEMPERATURE 8) EVAPORATOR UNIT - "ICE MAKE" MAKE MODE NO S7012-301H (SS CANOPY) 9) EVAPORATOR COIL - ALUMINIUM FIN & COPPER TUBE TYPE 10)REFRIGERANT - R22 11) CONNECTED POWER LOAD - 1.46KW/HR 12) POWER SUPPLY - 440v, 50HZ, 3Phase 13)DEFROSTING METHOD - HOT GAS DEFROSTING

SCHEDULE 'A' PART XVI (MISCELLANEOUS ITEMS) Note: This schedule is not pre-priced by MES

INTERNAL WATER SUPPLY

Supply and fix Two way bib cock, cast copper alloy, chromium plated suitable for 15mm bore pipe, Quarter turn (Low-Flow) along with wall flange complete all as specified and as directed. Make: Jaquar Model No KUP-CHR-35041PM or Equivalent model in Somany/ Kohler/ Hindware

Supply and fix Pillar cock, cast copper alloy, chromium plated suitable for 15mm bore pipe, Quarter turn (Low-Flow) along with flange complete all as specified and as directed. Make: Jaquar Model No KUP-CHR-35001PM or Equivalent model in Somany/ Kohler/ Hindware

Supply and fix Sink cock cast copper alloy, chromium plated suitable for 15mm bore pipe, Quarter turn (Low-Flow) with swinging spout along with flange complete all as specified and as directed. Make: Jaquar Model No FLR-CHR-5357N or Equivalent model in Somany/ Kohler/ Hindware

Supply and fix Bib cock, cast copper alloy, chromium plated suitable for 15mm bore pipe, Quarter turn (Low-Flow) along with wall flange complete all as specified and as directed. Make: Jaquar Model No KUP-CHR-35037PM or Equivalent model in Somany/ Kohler/ Hindware

Supply and fix Health Faucet, cast copper alloy, chromium plated with 1 metre long easy flex tube and wall hook with NRV(Back flow preventer) complete all as specified and as directed. Make: Jaquar Model No ALD-CHR-579 or Equivalent model in Somany/ Kohler/ Hindware

Supply and fix Angle stop Cock, cast copper alloy, chromium plated suitable for 15mm bore pipe, along with wall flange complete all as specified and as directed. Make: Jaquar Model No KUP-CHR-35053PM or Equivalent model in Somany/ Kohler/ Hindware

INTERNAL ELECTRIC SUPPLY

Supply and fix 40 W surface / wall mounted LED batten capable of delivering minimum 4000 lumen, having PC diffuser, luminous efficacy of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. BN100C LED40S-6500 PSU L120 GR or equivalent model of Havells or Wipro

Supply and fix surface mounted round shape LED downlight 12 Watts capable of delivering 1200 lumen. having minimum luminous efficiency > 100 lumen/W, CCT 6500K, CRI > 80, high quality polycarbonate diffuser, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. SM250C LED12S- 6500 PSU WH or equivalent model of Havells or Wipro

Supply and fix 20 W surface / wall mounted LED batten capable of delivering minimum 2000 lumen, having PC diffuser, luminous efficacy of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. BN 021C LED20S PSU CDL/NW GR or equivalent model of Havells or Wipro

Supply and fix 10 W surface / wall mounted LED batten capable of delivering 1150 lumen, having PC diffuser, luminous efficacy of > 110 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No.BN 021 LED10S- 6500/4000 PSU GR S1 or equivalent model of Havells or Wipro

Supply and fix 39/40 W recessed mounted square shape 2' X 2' LED panel capable of delivering 3000 lumen having high efficiency long life LED package in integral module with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, high transmittance polystyrene opal diffuser, housed in white powder coated pressure die-cast aluminium heat sink having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Philips Cat-Part No.RC380B LED30S-4000 L60W60 PSU OD S1 or equivalent model of Havells or Wipro

Supply & Fix wall mounting fan having blade sweep 600 mm, air delivery not less than 125 m³/min, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size complete all as specified and directed by engineer-in-charge. Make: Crompton Cat-Part No. WM Fizzair or equivalent model of Havells & Bajaj

Supply and fix 25 W security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 2600 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high efficiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed by engineer-in-charge. NOTES: The above rate including security light fittings and GI pipe bracket with all fixing accessories. Make: Philips BRP052 LED 036 CW HP SLA FG S1 PSU GR or equivalent model of Havells or Wipro

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type BUILDING PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

The STABILIZER PANEL - 4(B) of shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 320 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection

[B] INCOMING [i] 200 Amp, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicator (Red, Yellow, Blue)- 01 Set

[C] OUTGOING [i] 63A, 16 kA, 415 V, 50 Hz FP MCCB - 05 Nos [ii] 32 A, 10 kA, 415 V, 50 Hz TP MCB - 06 Nos [iii] LED phase indicator (Red, Yellow, Blue)- 05 Set [iv] Digital ammeter of suitable capacity with suitable CTs for each feeder- 11 Nos. NOTES: [i] The Panel shall be purchased from the original equipment manufacturer (OEM) only. [ii] The bidder shall furnish dimensional drawings of the items offered indicating all the fittings, dimensional tolerances, GADs, etc. for approval of the Engineer-in-Charge.

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type LT PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

The panel shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 320 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection

[B] INCOMING [i] 200 Amp, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicator (Red, Yellow, Blue)- 01 Set

[C] OUTGOING [i] 63 Amp, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. - 05 Nos (4 Nos for blowers and 1 no Spare) Note: [i] The Panel shall be purchased from the original equipment manufacturer (OEM) only. [ii] The bidder shall furnish dimensional drawings of the items offered indicating all the fittings, dimensional tolerances, GADs, etc. for approval of the Engineer-in-Charge.

SEWAGE DISPOSAL

Supply and laying 150mm internal dia DWC HDPE SN-8 pipes confirming to IS 14930 part-2 / IS 16025 Part-24, laying including all necessary specials, cutting and jointing as specified and directed.

EXTERNAL WATER SUPPLY

Material and Labour for construction of valve chamber 900x900x900 mm depth with PCC foundation in the ratio 1:4:8 , brick work with cement mortar in the ratio 1:6 using of class B bricks , PCC 1:2:4 type B0 using 12.5 mm aggregate at the top , plastering 15 mm thick in the ratio 1:4 including MS sheet cover 3mm thick with angle iron frame 50x50x6mm locking arrangement complete with painting on steel surface with two coats of synthetic enameled paint over one coat of red oxide primer complete all as specified and directed . (Earth work shall be measured and paid separately in the respective items)

Supply and fix automatic pressure pump single phase, 0.5 HP capacity suitable for 180V- 240V, 50Hz, IP-65 protection complete with all accessories all as directed and specified

Supply and fix Non clog vertical, single phase 230 V, 50 Hz, waste disposer with cutting blades of capacity 1.75 HP with cast iron impeller ,with max solid particles 10mm with having flow 60 LPM and head 12 Mtr complete all as directed and as specified . Model No ETERNA 1300BW of Kirloskar or techno commercial equivalent of other specified makes.

EXTERNAL ELECTRIC SUPPLY

Material and Labour Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed.

Supply and Fix cable route indicator Oval shape 200x150x6mm cast iron fixed on 25x25x6mm angle iron including marking of HT/LT UG Cable duly painted and grouted in PCC

Supply and fix Poles 3 Mtr suitable for post top lanterns Aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish. Compatible for post top lanterns . Window-plasma cut & duly chamfered opening window of 300x110 mm for terminal connection & Mounting accessories. Window cover is fitted with Allen screw to the pole . Decorative sleek casting ring to increase aesthetical appeal

C R R CONSTRUCTIONS

GOPAL TEKNOCON PRIVATE LIMITED

varsha construction

SREEKRISHNACONSTRUCTIONS