Installation of National Flag (Tiranga) in Ramlila Park under Zone-06 Ward-85 Lajpat Nagar.

Earth Work-E/W in Excavation in trenches for foundation pipe cable etc in ordinary soil (loan clay or sand ) including 1.5left and 50m and dressing Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated soil as directed, within a lead of SO m.lncluding dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the All kinds of soil.-Rate-215 per 1 Cum.

Concrete/R.C.C. Work-Providing and laying In position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:6:12 (1 cement : 6 coarse sand (zone-Ill): 12 graded Brick aggregate 40 mm (nominal size)-Rate-4380 per 1 Cum.

BRICK WORK-Brick work with common burnt clay (non modular) bricks of class -150 in super structure Cement mortar 1:4 (1 cement: 4 coarse sand) Brick work with common burnt clay (non modular) bricks of class -150 in super structure above plinth level up to floor V level in all shapes and sizes. Cement mortar 1:4 (1 cement: 4 coarse sand)-Rate-7500.00 per 1 Cum.

Concrete/R.C.C. Work-4.1.3 Providing and laying In position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size)-Rate-6750 per 1 Cum.

FLOORING WORK-11.23 Providing and fixing 18 mm thick Granite (gang saw cut), mirror polished Providing and fixing 18 mm thick Granite (gang saw cut), mirror polished, premoulded and prepollshed, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), Joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Slab area upto 0.50-Rate-3500.00 per 1 Sqm.

MILD STEEL & IRON WORK-10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making_curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-In-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.).-Rate-620.00 per 1 kg

Supply & Fixing of 7.62 mtr (25 ft) High Mast Shaft of approved make with rising system, hot dip galvanized inside & outside, having pole sheet thickness 3 mm, top dia minimum 100 mm, bottom dia 310 mm, base plate 25 mm thick, suitable for wind velocity as per IS 875 Part-3 and having no circumferential weld, complete with accessories such as head frame, 0.75 HP power tool motor, 3-point suspension system with 6 mm dia steel wire rope, double drum winch, including making suitable RCC foundation as per manufacturer's drawing/site requirement along with foundation bolts, nuts, washers, anchor plates etc., complete in all respects. Supply & Fixing of 7.62 mtr (25 ft) High Mast Shaft of approved make with rising system, hot dip galvanized inside & outside, having pole sheet thickness 3 mm, top dia minimum 100 mm, bottom dia 310 mm, base plate 25 mm thick, suitable for wind velocity as per IS 875 Part-3 and having no circumferential weld, complete with accessories such as head frame, 0.75 HP power tool motor, 3-point suspension system with 6 mm dia steel wire rope, double drum winch, including making suitable RCC foundation as per manufacturer's drawing/site requirement along with foundation bolts, nuts, washers, anchor plates etc., complete in all respects.-Rate-120000 per 1 nos.

Supply and fixing of 40 A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. SCh no 807 F" "Supply and fixing of 40 A TPN capacity of automaticstreet light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of timeswitch TSO 100 series with contactors, HRC fuses,isolating switch metering instrument & instrument boxwith CTs etc. in case of TPN, complete in all respect.SCh no 807 F"-Rate-29300.00 per 1 nos.

Supply and laying of aluminium conductor PVC insulated 16 Sqmm 4 core armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Sch no 501-i" "Supply and laying of aluminium conductor PVCinsulated 16 Sqmm 4 core armoured served sheathedcables 1100 Volts grade at a depth of 750 mm belowground level over a cushion of 75 mm. thick sand allaround and protected with burnt bricks on sides and ontop. On surface the cable run shall be fixed on M.S.clamps etc. of suitable size or as directed by theEngineer-Incharge, complete in all respect. Thearmouring of the cable shall be properly connected withthe earth conductor by clamps etc.Sch no 501-i"-Rate-343.00 per 1 Mtr.

Supply & Fixing of the indian national flag size (1800mm x 1200mm) Supply & Fixing of the indian national flag size (1800mm x 1200mm)-Rate-12000 per 1 nos.