Construction of Electrical system to releasing connection (50 K.W.) to consumer Electrical Engineer, Northern Railway, Alamnagar, Lucknow in the area of E.U.D.D.-Rajajipuram, LESA CIS Gomti, Lucknow against Deposite Head

Amount

Safe carriage, loading and unloading of following material from ESC Daliganj, Lucknow to work site/J.E. dump store.

11/0.4 K.V. 100 K.V.A. Transformer

11 K.V. S.T. Pole 9.5 Mtr. long.

L.T. PVC XLPE Cable 3.5X150 Sq.mm.

11 K.V. XLPE Cable 3X120 Sq.mm.

11 K.V. Out door Jointing kit 3X120 Sq.mm.

11 K.V. Metering cubical Plifer proof CTR 10/5 Amp.

11 K.V. Out door type CT/PT. CTR 10/5 Amp. (Metering unit)

11 K.V. Non Extensible RMU SF-6

Fabrication, Erection of Double Pole Structure on 9.5 mtr. long STP with necessary clamps, accessories required including fixing of Top Channel 125X65X6 mm. (2240 mm long) 01 nos., Dropper Channel 100X50 mm. (2028 mm long) 01 nos. with arrangment of fixing of 06 nos. 11 K.V. Pin Insulators. Cross Bracing set of MS Angle 01 Nos. Grouting of 02 Nos of STP with cement, sand and brick ballast in ratio 1:4:8 (2X0.9 Cu.Mtr) and making plinth upto the height of 300 mm from ground. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect. Providing Danger board, Name plate & Barbed wire. Earthing of both the poles.

Erection of Single Pole on 9.5 mtr. STP with fixing of necessary clamps and other accessories required for stringing along with plinthing & grouting of STP with cement, sand and brick ballast in the ratio 1:4:8 (0.9 Cu.Mtr each) upto the height of 300 mm. from the ground level.

Placement of 100 K.V.A Transformer on plinth making L.T & H.T side conection of both side by fixing of Lugs, L-piece and other material required for completion of work including cariage of Transformer from store to site.

Earthing of 11/0.4 K.V Distribution Transformer/Metering Cubical body/neutral by way of boring and lowering of ISI marked two Nos. G.I pipe 1.5" dia 20 m deep from the ground level with solid cone at the lower end of G.I pipe. One end of G.I strip of size 50X6 mm. will be connected with neutral and body of the Transformer & other end will be clamped & welded with G.I Pipe as per UPPCL norms (All the material will be arranged by contractor at their own cost.)

Supply and Installation of different type D.P. Box with Busbary type. All the civil and other material required shall be arranged and provided by contractor for completion of job as per RESPO norms along with necessary laying of cable and its cartage & necessary connections.

Laying of 11 K.V. XLPE cable size 3X120 Sq.mm. single circuit including all civil material like brick, sand, G.I. Pipe etc. as per latest ISS.

Kacha Road.

Pakka Road.

Hoisting of 11 K.V. XLPE cable 3X120 mm2. along with 4" dia G.I. Pipe 03 meter long with required clamp etc.

Lay down the LT PVC cable of different sizes for making the both side, connection of Transformer after fixing the necessary clamps Lugs and other material required for completion of work including carriage from store center.

Installation of 11 K.V. Metering Cubical Pilfer proof.

Installation of C.T./P.T Unit 10/5 Amp.

Installation of 11 K.V. Non Extensible RMU SF-6.

1 Material supplied by Department - Transformer, Pole, XLPE cable, Jointing kit, Metering cubical, CT/PT, LT PVC cable etc. 2 Material supplied by Contractor - Civil material, steel sections,Clamps,Nuts & Bolts & other pettey items required for work. Note :- 1 All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2 One carriage including loading/unloading from dump site to pit site is included in scope of work 3 During execution of work all risk will be of the contractor. 4 Contractor will provide all T & P, vehicle and man power. 5 All the old and used material should be taken on book. 6 The quantity may be vary ±10%.

SINGH ENTERPRISES