RENOVATION OF OFFICE OF THE OFFG DIRECTOR MM AT ADA HQ BANGALORE

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. complete all as per sample available at ADA and OEMs specification. Make: Asian/ Berger/ Nerolac

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Make: Asian/ Berger/ Nerolac

French spirit polishing of approved shade with two or more coats including a coat of wood filler, cleaning / preparing the existing old surface with sand paper and scarpers etc complete as per ADA instructions.

LACQUERED GLASS WORK Providing and fixing in position 12mm toughened lacquered glass (colour-White) for columns. The work to include making necessary template for all the glasses and then cutting the glass to correct size, making all the necessary holes, cuts etc., and then toughening the same. The cost to include all hardware required viz., single corner patch, bracket etc., The approximate size of each glass will be 3'x4' subject to site conditions. The rate is for a finished item of work etc., complete as directed. Make: Saint Gobian/Modi

False Ceiling correction: Correction of three small portions of gypsum board false ceiling got to be corrected with provision of new gypsum board including supply, cutting, fixing, including joint correct ion etc. Complete to make it presentable. Make: Gyproc / Armstrong

Customising the wooden storage into computer table and Place for Xerox Machine: Removing the existing lower division storage doors (04 nos) along with internal shelfs. After that by using the available items it should be made as working place and other side we have to make place for large Xerox machine. Complete the work with using suitable hardware and making it presentable.

Converting the existing openable door into sliding door: The existing door located between the 216 & 217 is openable type needs to be sliding using suitable aluminum track with wheels and using required hardware make it presentable. Complete.

Provision of Hydraulic Door closure: Providing and fixing of door soft closure at main doors of O/o DMM & SO. Complete as per the ADA & OEM instructions. Make: Godrej

Provision of Door lock & handles: Providing and fixing of Mortice door lock and handles matching with the existing one at main doors of O/o DMM & SO. Complete as per the ADA & OEM instructions. Make: Godrej

The premium executive table (Main Table+ Ped+ Return table) size shall be : 2400 Width mm x 1104 Depth mm x 735 Height mm. The top panel shall be 40 mm thick(18 mm MDF + 18 mm MDF batons + 4 mm Natural Veneer) Veneered portion of work surface is finished with high gloss polyster. The under structure shall be having legs made from 1.6 mm thick MS clad with the strips of MFC (Medium Density fiber). Hollow construction of legs facilitates wire management. The modesty & side panel should be 18 mm thick MDF plus pigmented black and coated with melamine. The storage shall be having drawer unit unit body shall be constructed from 18 mm thick MDF boards has combination of 2 box drawers + 1 filling drawer. Drawers should be mounted on double extension ball slides + drawer fronts should be of natural veneer coated with High gloss Polyster and made of 23 mm (18 mm MDF + 4 mm Natural Veneer + 1 mm DL) and drawer body made of 14 mm MDF (12 mm MDF + 1 mm DL + 1 mm DL). The Premium executive table ERU size shall be : 1400 Width mm x 580 Depth mm x 690 Height mm. The top panel shall be 40 mm thick (18 mm MDF + 18 mm MDF batons + 4 mm Natural Veneer) Veneered portion of work surface is finished with high gloss polyster. The under structure shall be having the modesty panel of 18 mm thick MDF plus pigmented black and coated with melamine. The storage shall be having drawer unit unit body shall be constructed from 18 mm thick MDF boards has combination of 2 box drawers + 1 filling drawer . Drawers should be mounted on double extension ball slides + drawer fronts should be of natural veneer coated with High gloss Polyster and made of 23 mm (18 mm MDF + 4 mm Natural Veneer + 1 mm DL) and drawer body made of 14 mm MDF (12 mm MDF + 1 mm DL + 1 mm DL). Preferred model: Elite EBJ 01D24 (Featherlite) Brands: Godrej/ Featherlite/ Durian/ Damro/ Nilakamal

Supply & Installation of High Back revolving chair. Overall Dimensions of Chair-Seat Height - min 49.9 to max 58.9 cm. Total Height - min 134.9 to 143.9 cm. Width & Depth of Chair as measured from pedestal - Width 77 cm and Depth 77 cm • Seat/back assembly: The seat should be made up of 1.2 ± 0.1cm. Thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort. back size: 53.0cm.(w) x 95.4cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkhr steel and should be black powder-coated (dft 40-60 microns) Armrest assay: the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather The mechanism should be designed with the following features: * 360° revolving type, * seat back tilting ratio of 1 : 1.5 * Front pivot for tilt with feet resting on ground ensuring more comfort, * tilt tension adjustment, * 5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released * Static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. it has an adjustment stroke of 9.0 ± 0.3cm the bellow should be 1 piece and blow moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon. Preferred model: Nilakamal Boss High back Brands: Godrej/ Featherlite/ Durian/Damro/ Nilakamal

• Supply& installation Mid Back revolving chair without Tilting Mechanism. • The seat should be made up of 1.2 ± 0.1cm. Thick hot-pressed plywood and upholstered with leather and moulded polyurethane foam. The back foam should be designed with contoured lumber support for extra comfort. • Back size:53.0cm.(w) x 73.0cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) thehr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thkhr steel and should be black powder-coated (dft 40-60 microns) the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. The armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. The p.u. armrest should be made of black integral skin polyurethane with 50-70 shore hardness and reinforced with m.s. insert. The armrest top should be made of abs & upholstered with foam & leather the seat base assy. should be designed with following features: 360° revolving type without back tilt. It has an adjustment stroke of 12.0 ± 0.3cm the bellow should be 3-piece telescopic types and injection moulded in black polypropylene the pedestal should be made of die-cast aluminum with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-centre dia. (77.0 ± 1.0cm with castors) the twin wheel castors should be injection moulded in black nylon. • Overall Dimensions of Chair Seat Height - min 43.4 to max 55.4 cm. Back Height - min 99.4 to 111.4 cm. Preferred model: Nilakamal Boss mid back Brands: Godrej/ Featherlite/ Durian/Damro/ Nilakamal

Supply & INSTALLATION OF Discussion table of 4-seater rectangular in shape of 210x115x74 cm • Work top--Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing dual access flap provided for access to power supply and data cables. • Under structure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. • Wire Management-A wire raiser made of 0.8mm CRCA MS IS: 513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either side for standard 8 modules Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI, VGA-A,etc). Preferred Model: Godrej Mingle membrane 4 seater table Brands: Godrej/ Featherlite/ Durian/Damro/ Nilakamal

• Supply& installation Mid Back revolving Discussion chair . • SEAT/BACK ASSEMBLY: The seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up 1.2 TO 1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam The back ply and foam is designed with contoured lumber support for comfortable seating posture * MID BACK SIZE 48.5 cm (W) X 64.5 cm (H) * SEAT SIZE 51.0 cm (W) X 48.0 cm (D) • HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m* and Hardness load 16 2 kgf as per IS 7888 for 25% compression ARMRESTS (ADJUSTABLE):The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of B3 81z0 03 cm x 0 2-LO 01 cm thk M S E R W tube having chrome plated finish The armrest height adjustable up to 6 5z0 Scm in 5 steps • KNEE TILT SYNCHRO MECHANISM WITH SEAT DEPTH ADJUSTMENT * 360° revolving type Single point control * Single point control, * Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment * 4-position locking with anti-shock feature Seat back tilting ratio of 1.2 * Seat depth adjustment of 6.0 +0 Scm can be locked in 6 positions • FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features * 360° revolving type Single point control * Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment * 4-position locking with anti-shock feature * knockdown condition vacations within +1 0 cm • ADJUSTABLE BACKREST: The back rest is connected to the mechanism with a drop-iift mechanism which can be adjusted in the range of 7.0 IO.5cm. And locked in 5 positions for the better lumbar support. FIXED SPINE (COFERENCE/ VISITOR): The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; Contd../- made of 0.8 TO.05 cm thk HR Steel and is black powder-coated ( DFT 40-60 microns ) • HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.010.3 cm. • PEDESTAL ASSEMBLY: The pedestal is fabricated from 0.2 0.02 cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel • castors. The pedestal is 66.010.Scm. Pitch-centre dia. (76.011.0 cm with castors). • TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. Mid Back (W)76.*(D)76*(H)93.4-110.4 (SH)47.5-57.5 cm Preferred Model: Nilakamal Command Mid back chair Brands: Godrej/ Featherlite/ Durian/Damro/ Nilakamal

Supply & Installation of 03-SEATER SOFA • SEAT FOAM: The seat is made up of PU foam in Density 28 ±2 kg/cum with an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. • BACK FOAM: The back is made up of PU foam in Density 28 ± 2 kg/cum with two additional top layer of super soft foam of density 32±2 kg/cum, upholstered with fabric or leatherette. • UNDERSTRUCTURE: Under structure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose. LEG ASSEMBLY: It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic end cap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45CM. Preferred Model: PISA (Godrej Interio) / DAMRO-SABENA Brands: Godrej/ Featherlite/ Durian/Damro/ Nilakamal

Supply & Installation of 01-SEATER SOFA • SEAT FOAM: The seat is made up of PU foam in Density 28 ±2 kg/cum with an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. • BACK FOAM: The back is made up of PU foam in Density 28 ± 2 kg/cum with two additional top layer of super soft foam of density 32±2 kg/cum, upholstered with fabric or leatherette. • UNDERSTRUCTURE: Under structure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS: 303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over under structure for cushioning purpose. LEG ASSEMBLY: It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic end cap. Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45CM. Preferred Model: PISA (Godrej Interio)/DAMRO-SABENA Brands: Godrej/ Featherlite/ Durian/Damro/ Nilakamal

Supply & installation of Centre Coffee table with glass top, wooden legs 100 x 65 x 45 mm. • Overall Size : Width : 100cm Depth : 65cm Height : 45cm TABLE LEGS METERIALS: Colour :cherry • TABLE TOP MATERIALS & SIZE: (tempered Glass/ 10mm), L X W X T: 1000x650x10mm Colour: clear. Preferred Model: PISA (Godrej Interio) Brands: Godrej/ Featherlite/ Durian/Damro/ Nilakamal

Supply of ‘L’ shaped Manager Table of size shall be 1650mm(L) x 750mm(D) and Return Table 1200mm(L) x 450mm(D) with one side attached Frame of Fabric Magnetic and White board. Work top shall be made up of 25mm thick prelaminated particle board interior grade (As per IS: 12823). Bottom shall have a backing laminate of minimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2mm thick PVC Edge band with glue of standard quality. The single side legs shall be used for supporting panels & work surface on one side only. Single side legs shall be fabricated by CO2 welding in MS Tube of section 38 mm x 25 mm (IS: 7138 ERW Tube) with the base plate of the MS plate of 35x22x5mm (IS: 2062, 5 mm HR) over which an M8 Leveler shall be fitted, which shall allow for adjustment of the height by 50mm and this shall be coated with minimum 45 micron thickness of epoxy powder coating. Body Panel Structure: uprights and horizontals shall be made of aluminum extrusion having material AL96063-T6 or equivalent and shall have an average wall thickness of 1.2 mm and also powder coated with epoxy-polyester powder. Fabricated bottom frame for 52.4mm shall be comprises of L- Channels and it shall be made of 2mm thick CRCA steel (IS:513), formed plates of 3mm thick HR steel (IS:2062) & ERW steel tube of size 35x15x1.6mm in oval cross section (IS:7138) welded together. This shall be coated with average 50 to 60 micron thickness of epoxy powder coating. The 52.4 mm panel has more elaborate and flexible construction offering various functional and decorative finishes as well as cable management capacity. Preferable model: Featherlite Senate HT 531 Brands: Godrej/Featherlite/Durian/Damro/Wipro

Chair: large seat Depth + cross headrest SEAT/BACK ASSEMBLY: The seat is made up of 1.2 * 0 fern thk hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 The Back is made up of injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity yarn with 28 density foam Sandwich in lumbar area. * SEAT SIZE(Larger Seat Depth) : 47.0 cm. (W) x 51.5 cm (D) * SEAT SIZE(Standard Seat Depth) 47 0 cm. (W) x 49.5 cm. (D) ” BACK SIZE : 45.0 cm. ”(W) x 65.3 cm. (M) HIGH RESILIENCE (HR) POLYURETHANE FOAM The HR poly methane seat foam is moulded with density 45+/-2 kg/m"" and hardness 16 + 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features » Up-Down adjustment— 8 steps (8.0+0.Scm range) • Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad Lumbar pad has an adjustment of 8 0 + 0.5 cm in height. FRONT PIVOT SY!’JCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. Preferred Model: Nilakamal - Hexon High back chairs Brands: Godrej/Featherlite/Durian/Damro/Wipro

Providing and fixing a customized Main Table of size 1.80 x 0.9 x 0.75m. The table top shall be made up of 25mm thick Prelaminated Particle Board with PVC Edge. and which is provided with three side modesty with fixed 3 drawer system pedestal and detachable side table of size 1.20 x 0.45 x 0.75m with below storage in pedestal units including provision of cable manger, sliding computer key board tray of size 475mm (L) X 200mm (D) metal tray and other hardware to complete, as per specifications, drawings and as directed by Engineer in charge.

Providing and fixing a customized Main Table of size 1.20 x 0.6 x 0.75m. The table top shall be made up of 25mm thick Prelaminated Particle Board with PVC Edge. and which is provided with side modesty with below 2nos of storage in pedestal units. Including provision of cable manger, sliding computer key board tray of size 475mm (L) X 200mm (D) metal tray and other hardware to complete, as per specifications, drawings and as directed by Engineer in charge.

PNR INTERIOR SOLUTIONS PVT LTD (BID ID -3416836)

Orkay Interior & Modular Pvt Ltd (BID ID -3415116)