23(W)/EDCH/2025-26

Amount

Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/Bulandshar (0-50 Km)

Carriage of following material from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km).

(a) ST Pole 11/13 mtrs. Long

(b) PCC Pole 11 mtrs. Long

(c) PCC Pole 8.5 mtrs. Long

(d) LT ABC/PVC Cable 3.5x95/ 3.5x70sq.mm.

Carriage of following capacity transformer from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km).

Erection & Fixing of following pole in 11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.

(a) PCC Pole 8.5 mtr. Long

(b) PCC Pole 11 mtr. Long

(c) ST Pole 11/13 mtr Long

Erection of double pole structure on with PCC Pole 8.5 mtr. Long all accessories on following pole fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms. by providing all clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge.

Safely installing the New 25/63/100 KVA capacity transformer with the help of crane/manual labour at LT Sub-Station Double Pole/Plinth, as per direction of site incharge. With making all connections.

Laying of Three Phase LT ABC / LT ABC Cable 3.5x95 / 3.5x70 sq.mm and complete work properly, as per RESPO/Norms, and as per direction of site incharge.(Rate will be charge as per actual length of work).

Prividing & Fixing of LT Incoming Panel (with 300 Amp 3 phase 440 volt MCB) with all accessories And necessary Clamp nut and bolt for proper connection as per direction of site incharge. All the material provided by contractor.

Providing and fixing of Suspension Clamp with Eye Hook as per RESPO/Norms and as per direction of site incharge.

Providing and fixing of Dead End Clamp with Eye Hook, as per RESPO/Norms and as per direction of site incharge.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge. (only stay rod & stay wire will be provided by department)

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge. earthing rod and G.I. wire provided by department.

Grouting of following ST/PCC supports in CC 1:3:6 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge. all the material provided by contractor

PCC Pole 8.5 mtr. Long

ST/PCC Pole 11 mtr. Long

Fabrication of Guarding Angle & other requisites material for guarding by drawing 02Nos G.I Wire and making loop at suitable distance as per RESPO drawing/Norms by providing holding clamps, 02Nos. Eye bolts made of M.S. round size 12mm dia-100mm long & Cross Arm clamps made of M.S. Flat of size 50X6mm and bolts as per norms of RESPO Lucknow, and as per direction of site incharge. (only Guarding Angle & GI Wire will be provided by Department).

Laying , Stringing and final sagging of ACSR Weasel Conductor, as per RESPO/ Drawing Norms and as per direction of site incharge.

Erection & Fixing of 11KV. Fuse set on STP/PCC Pole, by providing all required fixing materials as per RESPO/Norms and as per direction of site incharge. (Only Fuse Set and required Angle/Channel) will be provided by the Department.

Erection & Fixing of 11KV. TPMO set on STP/PCC Pole, by providing all required fixing materials as per RESPO/Norms and as per direction of site incharge. (Only TPMO Set and required Angle/ Channel) will be provided by the Department.

Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms and as per direction of site incharge.

Jumpheing work of LT/HT line for proper energization of line.

Safely dismantalling work properly and carriage of old & used STP pole and other material from site of work to electricity store center, hapur with loading and unloding at both ends on kachha pakka road as per direction of site incharge

Providing and fixing of barbed wire as per RESPO norms on PCC/STP Pole

Provided and fixing HT/LT holding clamp as required at site with necessary nut bolt.

M/S RAJ ASSOCIATES (BID ID -5584416)

C B S ENTERPRISES (BID ID -5584451)