REPAIR TO LEAKAGE SEEPAGE FLOORIN FALSE CEILING PLUMBING ROOF TREATMENT AND OTHER MISC WKS IN OTM ACCN OF DELHI CANTT OFFICE AREA IN THE AOR OF AGE BR II UNDER GE NORTH DELHI CANTT 10

Amount

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling in wall care putty in holes existing or created, again sand papering thus making surface smooth and one coat of cement base paint complete all as specified and directed. Note : The work will be executed at highrise bldgs and cost for necessary arrangement of T&P and scaffolding is deemed to be included in quoted rate against this item.

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling in wall care putty in potholes existing or created, again sand papering thus making surface smooth and two coat of cement base paint complete all as specified and directed. Note : The work will be executed at highrise bldgs and cost for necessary arrangement of T&P and scaffolding is deemed to be included in quoted rate against this item.

M&L for preparation of old decoreated external wall surface by sand paper of required sizes, filling in wall care putty in potholes existing or created, again sand papering thus making surface smooth and one coats of weather proofing exterior acrylic emulsion paint complete all as specified and directed. Note : The work will be executed at highrise bldgs and cost for necessary arrangement of T&P and scaffolding is deemed to be included in quoted rate against this item.

M&L for preparation of old decoreated external wall surface by sand paper of required sizes, filling in wall care putty in potholes existing or created, again sand papering thus making surface smooth and two coats of weather proofing exterior acrylic emulsion paint complete all as specified and directed. Note : The work will be executed at highrise bldgs and cost for necessary arrangement of T&P and scaffolding is deemed to be included in quoted rate against this item.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed Note: OBD shall be done with roller of required size instead of brush.

M&L two coats of colour wash on surface of wall including preparation of old plastered surface complete all as specified and directed

Taking down cement or cement plaster on brick walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan on exceeding 6m mean radius, using old size brick, built in cement mortar 1:6, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L 10mm thick rendering on concrete surface of ceiling in CM 1:3 finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered wall surface and applying two coats of cement base paint with one coat primer complete all as specified and all as directed.

M&L for preparation of new external wall surface applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, alkali and fungal resistence,dirt resistence exterior paint of requqred shade (company depot tinted) with silicon aditives at 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 Ltr/10 sqm complete all as specified and all as directed.

M&L for preparing preparation of old decorated plastered or unplastered surfaces of ceilling and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

M&L for providing precast reinforced cement concrete jallies 45 mm thick including all mouldings 1:2:4 type B-0 (12.5mm graded stone aggreagte) set in cement mortar 1:4 including taking down Old RCC Jallies complete all as specified and directed

M&L for writing letters or figures (block, roman, Italic or Indian) not exc 30cm (avge ht 20cm) of height complete all as specified and directed

M&L for preparation of old painted surfaces of steel of any description over 10cms width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed complete all as specified and directed.

M&L for preparation of old painted surfaces of wood of any description over 10cms width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed.

M&L for double charged Vitrified ceramic tiles (Designer type) 10mm thick square/rectangular light shade texture polished, area of each tiles exceeding 0.42 sqm but n exc 1.0 Sqm, as in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile over and including 15mm thick cement mortar screed bed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for double charged Vitrified ceramic tiles (Designer type) 10mm thick square/rectangular light shade texture polished,area of each tiles exceeding 0.42 sqm but n exc 1.0 Sqm, as in dado/skirting over and including 10mm thick plaster in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises all as specified.

M&L for glazed ceramic designer coloured tiles size 600mm x 300mm x 7mm thick as in vertical surface of wall etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F in repairs to factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S&F in repairs solid door frame 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete.all as specified and directed.

S&F 100mm medium weight cold rolled mild steel butt hinges complete all as specified and directed

S&F aluminium anodised barrel tower bolt 200mm long extruded section complete all as specified and directed

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified and directed

Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC, Tar-felt, loose particles and all foreign materials over the roof and shifting the debris from site to out-side area as directed by authority on factory garbage area. Cleaning the surface & removing of dust, existing paints from wall & roof surface, finding visible crack Making V - Groove by machine on crack area, providing & applying Polymer Bonding agent 1:2 & filling those grooves by modified cement & sand mortar 1:4 with WPM liquid (5% by wt. of cement). complete all as specified and directed

M&L for 15mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 and including mixed with liquid water proofing compound @ 200ml per 50 kg of cement bag, surface finished even and smooth without using extra cement complete all as specified and directed. Note :- The cost of water proofing additive is deemed to be included in quoted rate against this item.

Cleaning all the dust and loose material by brush/blower/grinder including removing of vegetation/plantation from the surface and M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system. Make: STP/Sika/Asian paint or equivalent as approved by GE. Note:- Application of water proofing treatment will be done by Authorised Applicator only.

S&F in repairs for gypsum ceiling board for ceiling prepainted, perforated finish, 600mm x 600mm x 9mm to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600mm x 600mm, made out of 0.5mm thick G.I. tee 32mm x 24mm for main, 25mm x 24mm for cross tee and 20mm x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. suspension wires spaced at 1200mm on main runners including making niches for fans/light, including dismantling of wall & ceiling boards, (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fitllets. all as specified and directed.

Cutting shrubs, wild growth/trees n exc 30cm girth and removing complete vegetation growth from walls including taking out roots from roofs/brick work and making good the disturbed surface with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate including treating affected area with acid wash to check further growth of vegetation and disposing off the rubbish from site (MoD Land) from the above mentioned area complete all as specified and as directed.

DEEP ASSOCIATES

Rohan Construction Company

M/S GR construction compony

ANSH VANSH CONSTRUCTION COMPANY

M/S VERMA BUILDER

Keshav Brothers

V M CONSTRUCTION