Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹2.9 CrAccepted-Finance KODBELTALA BOALIADANGA BERHAMPORE MURSHIDABAD | BERHAMPORE | MURSHIDABAD | WEST BENGAL | ₹2.9 Cr | l1 | Accepted-Finance l1 |
| 2 | l2₹2.9 Cr+₹2.5 L (0.85%)Rejected-Finance MOHISHILA COLONY ASANSOL 713303 | ASANSOL | PASCHIM BARDHAMAN | WEST BENGAL | 713303 | ₹2.9 Cr+₹2.5 L (0.85%) | l2 | Rejected-Finance l2 |
| 3 | l3₹2.9 Cr+₹2.2 L (0.75%)Rejected-Finance ASANSOL | ASANSOL | ₹2.9 Cr+₹2.2 L (0.75%) | l3 | Rejected-Finance l3 |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
19 Oct 2022, 3:00 pmClosed
Secretary
Asansol mc
Maintenance of Damalia Pump house Robinsen Pump House and Dumping Ground PumpHouse including supplying and installation of necessary materials of Raniganj B II within AMC.
2022_MAD_401690_11
202/WS/ENG/2022
Open Tender
Miscellaneous Works
Item Rate
365 days
Asansol
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹20,000
21 Nov 2022
6 Sept 2022
21 Oct 2022
6 Sept 2022
19 Oct 2022
6 Sept 2022
Amount
REPAIRING AND MAINTENANCE OF DAMALIA, DUMPING GROUND & ROBINSEN STADIUM PUMP HOUSE OF RANIGANJ WITHIN ASANSOL MUNICIPAL CORPORATION.
Fixed Cost. Periodical inspection as and when required by electrical supervisor having valid supervisor's certificate of competency from directorate of Electricity (Licensing board) , govt. of west bengal or under any other state govt. of India along with pump Technician/ Supervisor. The supervisor requires to have thorough/in-depth instruction of all the electrical appliances to ascertain the healthy/ fault free operational condition of each equipment i.e For all kinds of pump-motor & its MCC panel ,cable ,HT VCB, ACB, OCB, Transformer, LT panel ,PDB, capacitor bank, all type of valves, actuators, relays, contactors, timers, SFU including cleaning of contacts by CRC 226 spray in HT & LT panel board, cleaning of all terminal sockets and checking of healthy condition of draw out feeders all complete and also any kind of Electro mechanical works of less than Rs. 500/- agency will be done within the above fixed cost. As per satisfaction of E-i-C.
Variable cost 240 HP CENTRIFUGAL PUMP- Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
240 HP CENTRIFUGAL PUMP- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
240 HP CENTRIFUGAL PUMP- Supply & install of new Roll Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
240 HP CENTRIFUGAL PUMP- Supply & Changing of pump oil
240 HP CENTRIFUGAL PUMP- Supply and installation of Shaft by dismantling old one, incl. fitting fixing all complete with all allied works.
240 HP CENTRIFUGAL PUMP- Supply and installation of Impeller by dismantling old one, incl. fitting fixing all complete with all allied works.
240 HP CENTRIFUGAL PUMP- Supply and installation of neck ring by dismantling old one, incl. fitting fixing all complete with all allied works.
240 HP CENTRIFUGAL PUMP- Repairing pump and motor base plate with dismantling of PCC, welding incl. fitting fixing all complete with all allied works.
240 HP CENTRIFUGAL PUMP- Repairing and leathe work for CI part of pump incl. fitting fixing all complete with all allied works.
240 HP CENTRIFUGAL PUMP- Repairing of bearing housing including all necessary materials to complete the item.
240 HP CENTRIFUGAL PUMP- Overhauling of Pump
180 KW SQUIRREL CAGE MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
180 KW SQUIRREL CAGE MOTOR- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW SQUIRREL CAGE MOTOR- pump terminal repairing by socketing & others necessary if reqired incl. fitting, fixing all complete with all allied works.
180 KW SQUIRREL CAGE MOTOR- heat burnish incl. fitting fixing all complete with all allied works.
180 KW SQUIRREL CAGE MOTOR- Overhauling of motor
180 KW MCC PANNEL- Supply & install of contractor of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Supply & install of Timer by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Supply & install of CT Coil by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Supply & install of MCCB of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Supply & install of Relay of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Repairing of Bus bar incl. fitting fixing all complete with all allied works. Like Socketing, Glanding of cable.
180 KW MCC PANNEL- Supply & install of AUX. Contact of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Supply & install of Ammeter/voltmeter of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Supply & install of Isolator switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Supply & install of MPCB switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
180 KW MCC PANNEL- Overhauling of Panel
150 HP CENTRIFUGAL PUMP- Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
150 HP CENTRIFUGAL PUMP- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
150 HP CENTRIFUGAL PUMP- Supply & install of new Roll Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
150 HP CENTRIFUGAL PUMP- Supply and installation of Shaft by dismantling old one, incl. fitting fixing all complete with all allied works.
150 HP CENTRIFUGAL PUMP- Supply and installation of Impeller by dismantling old one, incl. fitting fixing all complete with all allied works.
150 HP CENTRIFUGAL PUMP- Supply and installation of neck ring by dismantling old one, incl. fitting fixing all complete with all allied works.
150 HP CENTRIFUGAL PUMP- Repairing pump and motor base plate with dismantling of PCC, welding incl. fitting fixing all complete with all allied works.
150 HP CENTRIFUGAL PUMP- Repairing and leathe work for CI part of pump incl. fitting fixing all complete with all allied works.
150 HP CENTRIFUGAL PUMP- Repairing of bearing housing including all necessary materials to complete the item.
150 HP CENTRIFUGAL PUMP- overhauling of pump
110 KW SQUIRREL CAGE MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
110 KW SQUIRREL CAGE MOTOR- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW SQUIRREL CAGE MOTOR- pump terminal repairing by socketing & others necessary if reqired incl. fitting, fixing all complete with all allied works.
110 KW SQUIRREL CAGE MOTOR- heat burnish incl. fitting fixing all complete with all allied works.
110 KW SQUIRREL CAGE MOTOR- Overhauling of motor
110 KW MCC PANNEL- Supply & install of contractor of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- Supply & install of Timer by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- Supply & install of CT Coil by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- Supply & install of MCCB of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- Supply & install of Relay of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- Repairing of Bus bar incl. fitting fixing all complete with all allied works. Like Socketing, Glanding of cable.
110 KW MCC PANNEL- Supply & install of AUX. Contact of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- Supply & install of Ammeter/voltmeter of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- Supply & install of Isolator switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- Supply & install of MPCB switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
110 KW MCC PANNEL- overhauling of Panel
125 HP CENTRIFUGAL PUMP- Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
125 HP CENTRIFUGAL PUMP- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
125 HP CENTRIFUGAL PUMP- Supply & install of new Roll Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
125 HP CENTRIFUGAL PUMP- Supply and installation of Shaft by dismantling old one, incl. fitting fixing all complete with all allied works.
125 HP CENTRIFUGAL PUMP- Supply and installation of Impeller by dismantling old one, incl. fitting fixing all complete with all allied works.
125 HP CENTRIFUGAL PUMP- Supply and installation of neck ring by dismantling old one, incl. fitting fixing all complete with all allied works.
125 HP CENTRIFUGAL PUMP- Repairing pump and motor base plate with dismantling of PCC, welding incl. fitting fixing all complete with all allied works.
125 HP CENTRIFUGAL PUMP- Repairing and leathe work for CI part of pump incl. fitting fixing all complete with all allied works.
125 HP CENTRIFUGAL PUMP- Repairing of bearing housing including all necessary materials to complete the item.
125 HP CENTRIFUGAL PUMP- Overhauling of pump
100 KW SQUIRREL CAGE MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
100 KW SQUIRREL CAGE MOTOR- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW SQUIRREL CAGE MOTOR- pump terminal repairing by socketing & others necessary if reqired incl. fitting, fixing all complete with all allied works.
100 KW SQUIRREL CAGE MOTOR- heat burnish incl. fitting fixing all complete with all allied works.
100 KW SQUIRREL CAGE MOTOR- Overhauling of motor
100 KW SLIP RING MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
100 KW SLIP RING MOTOR- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW SLIP RING MOTOR- pump terminal repairing by socketing & others necessary if reqired incl. fitting, fixing all complete with all allied works.
100 KW SLIP RING MOTOR- heat burnish incl. fitting fixing all complete with all allied works.
100 KW SLIP RING MOTOR- overhauling
100 KW SLIP RING MOTOR- Supply & installation of new slip ring of adequate rating and dismantling the old one with all other allied works require to complete the item.
oil changing of starter control drum incl. fitting fixing all complete.
100 KW SLIP RING MOTOR- repairing of stater stud & Overhauling with supplying all necessary item.
100 KW SLIP RING MOTOR- Supply & Installation of carbon of adequate rating
100 KW Motor MCC PANNEL- Supply & install of contractor of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- Supply & install of Timer by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- Supply & install of CT Coil by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- Supply & install of MCCB of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- Supply & install of Relay of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- Repairing of Bus bar incl. fitting fixing all complete with all allied works. Like Socketing, Glanding of cable.
100 KW Motor MCC PANNEL- Supply & install of AUX. Contact of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- Supply & install of Ammeter/voltmeter of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- Supply & install of Isolator switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- Supply & install of MPCB switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
100 KW Motor MCC PANNEL- overhauling of Panel
75 HP CENTRIFUGAL PUMP- Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
75 HP CENTRIFUGAL PUMP- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
75 HP CENTRIFUGAL PUMP- Supply & install of new Roll Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
75 HP CENTRIFUGAL PUMP- Supply and installation of Shaft by dismantling old one, incl. fitting fixing all complete with all allied works.
75 HP CENTRIFUGAL PUMP- Supply and installation of Impeller by dismantling old one, incl. fitting fixing all complete with all allied works.
75 HP CENTRIFUGAL PUMP- Supply and installation of neck ring by dismantling old one, incl. fitting fixing all complete with all allied works.
75 HP CENTRIFUGAL PUMP- Repairing pump and motor base plate with dismantling of PCC, welding incl. fitting fixing all complete with all allied works.
75 HP CENTRIFUGAL PUMP- Repairing and leathe work for CI part of pump incl. fitting fixing all complete with all allied works.
75 HP CENTRIFUGAL PUMP- Repairing of bearing housing including all necessary materials to complete the item.
75 HP CENTRIFUGAL PUMP- Overhauling of Pump
55 KW SQUIRREL CAGE MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
55 KW SQUIRREL CAGE MOTOR- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW SQUIRREL CAGE MOTOR- pump terminal repairing by socketing & others necessary if reqired incl. fitting, fixing all complete with all allied works.
55 KW SQUIRREL CAGE MOTOR- heat burnish incl. fitting fixing all complete with all allied works.
55 KW SQUIRREL CAGE MOTOR- Overhauling of Motor
55 KW MCC PANNEL- Supply & install of contractor of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Supply & install of Timer by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Supply & install of CT Coil by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Supply & install of MCCB of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Supply & install of Relay of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Repairing of Bus bar incl. fitting fixing all complete with all allied works. Like Socketing, Glanding of cable.
55 KW MCC PANNEL- Supply & install of AUX. Contact of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Supply & install of Ammeter/voltmeter of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Supply & install of Isolator switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Supply & install of MPCB switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
55 KW MCC PANNEL- Overhauling of Panel
80 HP CENTRIFUGAL PUMP- Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
80 HP CENTRIFUGAL PUMP- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
80 HP CENTRIFUGAL PUMP- Supply & install of new Roll Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
80 HP CENTRIFUGAL PUMP- Supply and installation of Shaft by dismantling old one, incl. fitting fixing all complete with all allied works.
80 HP CENTRIFUGAL PUMP- Supply and installation of Impeller by dismantling old one, incl. fitting fixing all complete with all allied works.
80 HP CENTRIFUGAL PUMP- Supply and installation of neck ring by dismantling old one, incl. fitting fixing all complete with all allied works.
80 HP CENTRIFUGAL PUMP- Repairing pump and motor base plate with dismantling of PCC, welding incl. fitting fixing all complete with all allied works.
80 HP CENTRIFUGAL PUMP- Repairing and leathe work for CI part of pump incl. fitting fixing all complete with all allied works.
80 HP CENTRIFUGAL PUMP- Repairing of bearing housing including all necessary materials to complete the item.
80 HP CENTRIFUGAL PUMP- Overhauling of Pump
80 HP SLIP RING MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
80 HP SLIP RING MOTOR- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
80 HP SLIP RING MOTOR- pump terminal repairing by socketing & others necessary if reqired incl. fitting, fixing all complete with all allied works.
80 HP SLIP RING MOTOR- heat burnish incl. fitting fixing all complete with all allied works.
80 HP SLIP RING MOTOR- overhauling
80 HP SLIP RING MOTOR- Supply & installation of new slip ring of adequate rating and dismantling the old one with all other allied works require to complete the item.
80 HP SLIP RING MOTOR- oil changing of starter control drum incl. fitting fixing all complete.
80 HP SLIP RING MOTOR- repairing of stater stud & Overhauling with supplying all necessary item.
80 HP SLIP RING MOTOR- Supply & Installation of carbon of adequate rating
40 HP CENTRIFUGAL PUMP- Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP CENTRIFUGAL PUMP- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP CENTRIFUGAL PUMP- Supply & install of new Roll Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP CENTRIFUGAL PUMP- Supply and installation of Shaft by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP CENTRIFUGAL PUMP- Supply and installation of Impeller by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP CENTRIFUGAL PUMP- Supply and installation of neck ring by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP CENTRIFUGAL PUMP- Repairing pump and motor base plate with dismantling of PCC, welding incl. fitting fixing all complete with all allied works.
40 HP CENTRIFUGAL PUMP- Repairing and leathe work for CI part of pump incl. fitting fixing all complete with all allied works.
40 HP CENTRIFUGAL PUMP- Repairing of bearing housing including all necessary materials to complete the item.
40 HP CENTRIFUGAL PUMP- Overhauling of pump
40 HP SQUIRREL CAGE MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
40 HP SQUIRREL CAGE MOTOR- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP SQUIRREL CAGE MOTOR- pump terminal repairing by socketing & others necessary if reqired incl. fitting, fixing all complete with all allied works.
40 HP SQUIRREL CAGE MOTOR- heat burnish incl. fitting fixing all complete with all allied works.
40 HP SQUIRREL CAGE MOTOR- Overhauling of motor
40 HP SLIP RING MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
40 HP SLIP RING MOTOR- Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP SLIP RING MOTOR- pump terminal repairing by socketing & others necessary if reqired incl. fitting, fixing all complete with all allied works.
40 HP SLIP RING MOTOR- heat burnish incl. fitting fixing all complete with all allied works.
40 HP SLIP RING MOTOR- Overhauling of Motor
40 HP SLIP RING MOTOR- Supply & installation of new slip ring of adequate rating and dismantling the old one with all other allied works require to complete the item.
40 HP SLIP RING MOTOR- Oil changing of starter control drum incl. fitting fixing all complete.
40 HP SLIP RING MOTOR- Repairing of stater stud & Overhauling with supplying all necessary item.
40 HP SLIP RING MOTOR- Supply & Installation of carbon of adequate rating
40 HP Motor MCC PANNEL- Supply & install of contractor of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP Motor MCC PANNEL- Supply & install of Timer by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP Motor MCC PANNEL- Supply & install of CT Coil by dismantling old one, incl. fitting fixing all complete with all allied works.
Supply & install of MCCB of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP Motor MCC PANNEL- Supply & install of Relay of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP Motor MCC PANNEL- Repairing of Bus bar incl. fitting fixing all complete with all allied works. Like Socketing, Glanding of cable.
Supply & install of AUX. Contact of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP Motor MCC PANNEL- Supply & install of Ammeter/voltmeter of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP Motor MCC PANNEL- Supply & install of Isolator switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP Motor MCC PANNEL- Supply & install of MPCB switch of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP Motor MCC PANNEL- Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
40 HP Motor MCC PANNEL- Overhauling of Panel
15 HP SUB-MERSIBLE PUMP-MOTOR- Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
10 Sqmm 3 Core Socketing with supply of adequate size socket and all other allied works required to complete the item.
10 Sqmm 3 Core Supply & laying of Cable incl. dismantling old one.
Repairing of Starter including supply all necessary item and fitting fixing al complete.
Supply of Main switch 63 A including fitting fixing all complete.
Withdrawing, Surging and re installation of Pump from riverbed
Replacing of stainer pipe by dismantling old one and supply of new 250 mm dia fibre glass strainer including fitting fixing all complete.
100 mm dia MS/GI pipe replacing by dismantling old one and supply of new pipe including laying of new pipe line.
Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
Overhauling of Submersible pump motor.
7.5 HP SUB-MERSIBLE PUMP-MOTOR- Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
10 Sqmm 3 Core Socketing with supply of adequate size socket and all other allied works required to complete the item.
10 Sqmm 3 Core Supply & laying of Cable incl. dismantling old one.
Repairing of Starter including supply all necessary item and fitting fixing al complete.
Supply of Main switch 63 A including fitting fixing all complete.
Withdrawing, Surging and re installation of Pump from riverbed
Replacing of stainer pipe by dismantling old one and supply of new 250 mm dia fibre glass strainer including fitting fixing all complete.
100 mm dia MS/GI pipe replacing by dismantling old one and supply of new pipe including laying of new pipe line.
Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
Overhauling of Submersible pump motor.
05 HP SUB-MERSIBLE PUMP-MOTOR- Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
10 Sqmm 3 Core Socketing with supply of adequate size socket and all other allied works required to complete the item.
10 Sqmm 3 Core Supply & laying of Cable incl. dismantling old one.
Repairing of Starter including supply all necessary item and fitting fixing al complete.
Supply of Main switch 63 A including fitting fixing all complete.
Withdrawing, Surging and re installation of Pump from riverbed
Replacing of stainer pipe by dismantling old one and supply of new 250 mm dia fibre glass strainer including fitting fixing all complete.
100 mm dia MS/GI pipe replacing by dismantling old one and supply of new pipe including laying of new pipe line.
Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
Overhauling of Submersible pump motor.
KRTK PUMP 40 HP- Coil rewinding incl. fitting fixing all complete with all allied works.
Supply & install of new Ball Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
pump terminal repairing by socketing & others necessary if reqired incl. fitting, fixing all complete with all allied works.
Overhauling
Supply & install of new Mechanical seal by dismantling old one, incl. fitting fixing all complete with all allied works.
Scuba driver charge for installation including Oxygen cylinder and other necessary arrangement for installing KRTK Pump
40 HP OPEN WELL SUB-MERSIBLE PUMP-MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
Supply & install of new Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
Socketing of Cable
Cable Replacement with supply of new cable incl. fitting fixing socketing, glanding all complete.
Repairing of Panel fitting, fixing all necessary equipment and allied works required to complete the item.
Supply of Main switch 63 A incl. fitting fixing all complete.
Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
overhauling
30 HP OPEN WELL SUB-MERSIBLE PUMP-MOTOR- Coil rewinding incl. fitting fixing all complete with all allied works.
Supply & install of new Bearing by dismantling old one, incl. fitting fixing all complete with all allied works.
Supply & install of new Bush by dismantling old one, incl. fitting fixing all complete with all allied works.
Socketing of Cable
Cable Replacement with supply of new cable incl. fitting fixing socketing, glanding all complete.
Repairing of Panel fitting, fixing all necessary equipment and allied works required to complete the item.
Supply of Main switch 63 A incl. fitting fixing all complete.
Supply & install of HRC fuse of adequate rating by dismantling old one, incl. fitting fixing all complete with all allied works.
overhauling
HT VCB PANNEL- Supply & installation of new CT of adequate rating incl. fitting & fixing all complete with all allied works.
Supply & installation of new PT of adequate ratingincl. fitting & fixing all complete with all allied works.
Supply & installation of vaccum bottle of adequate rating incl. fitting & fixing all complete with all allied works.
Electric Heater repairing incl. fitting & fixing all complete with all allied works.
Supply & installation of rose contact of adequate rating incl. fitting & fixing all complete with all allied works.
Overhauling of VCB Panel
OCB PANEL FOR TRANSFORMER- Supply of Insulating Oil
supply & installation of contact of adequate rating with all other allied works.
Overhauling of OCB Panel
Repairing of Bus bar incl. fitting fixing all complete with all allied works. Like Socketing, Glanding of cable. For ACB/PDB Panel
Supply & installation of Contact of adequate rating incl. fitting & fixing all complete with all allied works. For PDB/ACB Panel
Replacement of old damage Voltmeter/Ammeter for ACB/ PDB Panel
overhauling of ACB/PDB Panel
Supply & Installation of HRC/HBC fuse of adequate rating material including fitting & fixing all complete with all allied work FOR acb/pdb Panel
TRANSFORMER 1200 KVA- Supply & installation of 11 KV Bush of adequate rating including fitting & fixing all complete with all allied works.
TRANSFORMER 1200 KVA- Re winding of transformer including fitting, fixing, testing, commissioning all complete including filling with Oil.
TRANSFORMER 1200 KVA- Filtering of Transformer Oil with necessary machinaries and Di-electric test of 33 kV for Transformer Oil.
TRANSFORMER 1200 KVA- Supply and installation of adequate size oil seal gasket for transformer.
TRANSFORMER 1200 KVA- Supply and filling with filtering of Transformer oil of Power oil.
TRANSFORMER 1200 KVA- Supply and filling of Silica Gel
TRANSFORMER 1200 KVA- Overhauling of Transformer
TRANSFORMER 250 KVA- Supply & installation of 11 KV Bush of adequate rating including fitting & fixing all complete with all allied works.
TRANSFORMER 250 KVA- Re winding of transformer including fitting, fixing, testing, commissioning all complete including filling with Oil.
TRANSFORMER 250 KVA- Filtering of Transformer Oil with necessary machinaries and Di-electric test of 33 kV for Transformer Oil.
TRANSFORMER 250 KVA- Supply and installation of adequate size oil seal gasket for transformer.
TRANSFORMER 250 KVA- Supply and filling with filtering of Transformer oil of Power oil.
TRANSFORMER 250 KVA- Supply and filling of Silica Gel
TRANSFORMER 250 KVA- Overhauling of Transformer
Supply & laying of Cable incl. necessary earth work and foundation trench fitting fixing socketing glanding all complete. 50 Sqmm 3Core 1.1 KV grade
70 Sqmm 3Core 1.1 KV grade
95 Sqmm 3Core 1.1 KV grade
120 Sqmm 3Core 1.1 KV grade
150 Sqmm 3Core 1.1 KV grade
185 Sqmm 3Core 1.1 KV grade
240 Sqmm 3Core 1.1 KV grade
300 Sqmm 3Core 1.1 KV grade
50 Sqmm 3.5 Core 1.1 KV grade
70 Sqmm 3.5 Core 1.1 KV grade
95 Sqmm 3.5 Core 1.1 KV grade
120 Sqmm 3.5 Core 1.1 KV grade
150 Sqmm 3.5 Core 1.1 KV grade
185 Sqmm 3.5 Core 1.1 KV grade
240 Sqmm 3.5 Core 1.1 KV grade
300 Sqmm 3.5 Core 1.1 KV grade
400 Sqmm 3.5 Core 1.1 KV grade
95 Sqmm 3Core 11 KV grade
120 Sqmm 3Core 11 KV grade
150 Sqmm 3Core 11 KV grade
185 Sqmm 3Core 11 KV grade
240 Sqmm 3Core 11 KV grade
300 Sqmm 3Core 11 KV grade
Repairing of Cable by straight through jointing method incl. supply of jointing kit and fitting fixing socketing glanding all complete. Necessary earth work if required. 10 Sqmm 3Core 1.1 KV grade
50 Sqmm 3Core 1.1 KV grade
70 Sqmm 3Core 1.1 KV grade
95 Sqmm 3Core 1.1 KV grade
120 Sqmm 3Core 1.1 KV grade
150 Sqmm 3Core 1.1 KV grade
185 Sqmm 3Core 1.1 KV grade
240 Sqmm 3Core 1.1 KV grade
300 Sqmm 3Core 1.1 KV grade
50 Sqmm 3.5 Core 1.1 KV grade
70 Sqmm 3.5 Core 1.1 KV grade
95 Sqmm 3.5 Core 1.1 KV grade
120 Sqmm 3.5 Core 1.1 KV grade
150 Sqmm 3.5 Core 1.1 KV grade
185 Sqmm 3.5 Core 1.1 KV grade
240 Sqmm 3.5 Core 1.1 KV grade
300 Sqmm 3.5 Core 1.1 KV grade
400 Sqmm 3.5 Core 1.1 KV grade
95 Sqmm 3Core 11 KV grade
120 Sqmm 3Core 11 KV grade
150 Sqmm 3Core 11 KV grade
185 Sqmm 3Core 11 KV grade
240 Sqmm 3Core 11 KV grade
300 Sqmm 3Core 11 KV grade
Socketing of Cable by crimping method incl. supply of adequate size of socket and fitting fixing of ampere tape all complete. upto 35 Sqmm 3Core 1.1 KV grade
50 Sqmm 3Core 1.1 KV grade
70 Sqmm 3Core 1.1 KV grade
95 Sqmm 3Core 1.1 KV grade
120 Sqmm 3Core 1.1 KV grade
150 Sqmm 3Core 1.1 KV grade
185 Sqmm 3Core 1.1 KV grade
240 Sqmm 3Core 1.1 KV grade
300 Sqmm 3Core 1.1 KV grade
50 Sqmm 3.5 Core 1.1 KV grade
70 Sqmm 3.5 Core 1.1 KV grade
95 Sqmm 3.5 Core 1.1 KV grade
120 Sqmm 3.5 Core 1.1 KV grade
150 Sqmm 3.5 Core 1.1 KV grade
185 Sqmm 3.5 Core 1.1 KV grade
240 Sqmm 3.5 Core 1.1 KV grade
300 Sqmm 3.5 Core 1.1 KV grade
400 Sqmm 3.5 Core 1.1 KV grade
95 Sqmm 3Core 11 KV grade
120 Sqmm 3Core 11 KV grade
150 Sqmm 3Core 11 KV grade
185 Sqmm 3Core 11 KV grade
240 Sqmm 3Core 11 KV grade
300 Sqmm 3Core 11 KV grade
Supply and Fixing new Post Top Light Set by replacement the old damage light including all necessary material, wire and labour required.
Replacing of Driver of campus LED light in Pole / Wall including necessary wire and labour required. 18 watts
40 watts
60 watts
72 watts
80 watts
120 watts
140 watts
160 watts
180 watts
210 watts
Supply of new outdoor type LED lights by replacing of old LED lights of campus light in Pole / Wall including necessary wire and labour required. 25 watts
40 watts
60 watts
72 watts
80 watts
120 watts
140 watts
160 watts
180 watts
210 watts
Supply of new indoor type LED Tube lights by replacing of old LED Tube lights inside of pump house & other rooms of pump house including necessary wire and labour required. 18 watts
22 watts
30 watts
Replacement of old LED Lamp by the new one including holder if required. 09 watts
11 watts
16 watts
20 watts
30 watts
Repairing of Metal Helaid light by replacing the following aparatus. 400 Watts Metal Helaid lamps
Replacing of 250 Watts Metal Helaid lamps
Replacing of 400 Watts Metal Helaid holder
Replacing of 400 Watts Metal Helaid Ballast
Replacing of 250 Watts Metal Helaid Ballast
Repalcing of Ignitor
Replacing of 250 Watts Metal Helaid holder
Replacement of Post Top Light Holder
Replacement of Post Top LED Lamp.
Repairing and Replacing of AC Ceiling Fan and Exhaust Fan
Rewinding and overhauling of AC Ceiling Fan including all necessary material, labour required
Supply and fixing new AC Celing fan by replaceing the old damage AC Ceiling Fan.
Rewinding and overhauling of Exhaust Fan including all necessary material, labour required
Supply and fixing new Exhaust fan by replaceing the old damage Exhaust Fan by new one Heavy duty 60 W
Supply and fixing new Exhaust fan by replaceing the old damage Exhaust Fan by new one Heavy duty 80 W
Supplying and drawing of 1.5 Sqmm copper cable of wiring
NON-RETURN VALVE: Repairing of gate incl. fitting fixing all complete with all allied works like supply of nut-bolts, rubber sheet (if required) 100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm dia
500 mm dia
Supply & installation of NRV of PN. 1.6 incl. fitting fixing all complete with all allied works like supply of nut-bolts, rubber sheet (if required) 100 mm dia
150 mm dia
200 mm dia
250 mm dia
600 mm dia
700 mm dia
Reparing of HOT Crain Mechinal Part
Repairing of Chain rope and Gear.
Repairing of 1 HP Dewatering Pump by motor Coil rewinding
Repairing Of 5 Hp Dewatering Pump By changing bearing, Bush, Neck ring all complete
Repairing of 5 HP Dewatering Pump by motor Coil rewinding
Supply of Salt For chlorination system
Repairing of Chlorination Tank
Sluice Valve repairing by dismantling old spindle, supply of new spindle, rubber sheet and nut bolts (if required) incl. earth work, de-watering, fitting fixing all complete for all types of pipe. 100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
500 mm dia
Sluice Valve repairing by dismantling old bush, supply of new bush rubber sheet and nut bolts (if required) incl. earth work, de-watering, fitting fixing all complete for all types of pipe. 100 mm dia
600 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
500 mm dia
Sluice Valve repairing by dismantling old Lock nut, supply of new lock nut rubber sheet and nut bolts (if required) incl. earth work, de-watering, fitting fixing all complete for all types of pipe line. 600 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
500 mm dia
Sluice Valve gate linear repairing with supply of rubber sheet and nut bolts (if required) incl. earth work, de-watering, fitting fixing all complete for all types of pipe line. 600 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
500 mm dia
Sluice Valve Gland packing & greaseing, incl dismantling old gland packing and nut bolts (if required) incl. earth work, de-watering, fitting fixing all complete for all types of pipe line. 600 mm dia.
100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
500 mm dia
Welding of MS pipes including necessary materails & labour cost at site.
Repairing of manifold line by replacing of old damaged MS pipe (8 mm to 12.5 mm thick) including supply and febricating, welding of new pipe along with earth cutting, dewatering, hiring basis hydra & JCB if required and all other items for complete the work. 150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
500 mm dia
600 mm dia
700 mm dia
700 mm dia
A.CONSTRUCTION CO.
SONA ENTERPRISE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .