8694 REPAIR REPLACEMENT AND CLEANING OF MANHOLES SEWAGE LINE SEPTIC TANK SOAKAGE WELL AND CONNECTED MISC B R WORKS AT AICTS NGM OGM FAFA PCDA O AND NADFM AREA UNDER AGE B R I OF GE S PUNE

Amount

Scooping & taking out sludge, sullage and foreign materials from septic tank, soak wells of any description & depth including removing & re-fixing of accessories and appliances required for safe disposal of sludge, sullage and foreign materials either by carrying the same in covered van / trolley outside defence land and it should be disposed off at such place which is not determinate to public health, complete all as specified and directed. Note :- Net depth shall be measured for payment purpose after bailing out water and the cost of bailing out water shall be deemed to be included in unit quoted rates.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete), 150mm dia, set in cement mortar, complete all as specified and directed. Notes for item nos. 02 to 05:- Excavation & earth work and demolition of PCC in foundation shall be measured and paid separately

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete), 200mm dia, set in cement mortar, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete), 250mm dia, set in cement mortar, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete), 300mm dia, set in cement mortar, complete all as specified and directed.

S&F of 150mm dia DWC (Double wall corrugated), class SN8 as in sewage pipes (Black or orange in colour) including with socketed ends with and all fittings & fixtures, water tight joints to prevent leakage, laid over sand cushioning and jointed complete with rubber rings joints etc complete all as specified and directed by Engr-in-Charge. Note:- Sand cushioning shall be measured and paid separately.

All as item no. 6.00 but 200mm dia, complete all as specified and directed by Engr-in-Charge

All as item no. 6.00 but 250mm dia, complete all as specified and directed by Engr-in-Charge

All as item no. 6.00 but 300mm dia, complete all as specified and directed by Engr-in-Charge Note for item nos. 6 to 9 :- Laying of sewage line work is to carried out in running sewage water therefore, temporary diversion /plugged of existing sewage line & bailing out of sewage water is the responsibility of contractor and the cost for the same provisions are to be deemed to be included in unit quoted rates.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in soft / loose soil, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and exc. 1.5m but n.exc. 3.0m in depth for foundations, manholes etc and getting out in in soft / loose soil, complete all as specified and directed.

Excavation in trenches or in road cuttings not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in hard / dense soil, complete all as specified and directed.

Excavation in over areas, n.exc. 1.50m deep and getting out in soft / loose soil, complete all as specified and directed.

M&L TMT bars, up to 10 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L sand filling under in trenches or foundations including watering and consolidation, complete all as specified and directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified and directed.

S&F in repairs PVC (SWR), 75mm dia outlet floor trap, plain with steel grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) WC connector with lip ring, complete all as specified and directed

S&F in repairs PVC (SWR) gully trap 125x110mm, setting and jointing to waste pipe pipe with solvent cement, complete all as specified and directed.

Cleaning of manholes of any size and any depth by taking out semi solid / solid sludge from manholes completely and dispossed off the same in covered vehicle exceeding 5.0 Km complete all as directed by Engr-in-charge.

M&L for cleaning of blockage of sewer lines of any type & any dia of sewer line (ie branch sewer line or main sewer line) by way of cleaning desludging foreign material as well as rodding of sewer line between succession manholes manually /mechanically or by pumping out sewage from blocked manhole including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional entering from floor trap, water closet, soil waste / vent pipe, gully trap up to final drop / outlet into septic tank, soakage well complete all as specified and directed by Engineer-in-charge.

Cleaning of sewage system on day to day basis including blocked WCs, blocked WHB outlet , bottle traps, nahani traps, floor traps, gully traps, soil/waste pipe running on external walls of building including junctions in running / flowing condition without any disturbance and removing all types of blockages of any description in any situation manually or mechanically and disposal off of the sludge / waste materials outside the Defence land by deploying 02 (TWO) safaiwala per day (All working days) complete all as specified and directed by Engineer-in-charge. Note :- (i) Complaints which shall be handed over to contractor up to 1600 Hrs, shall be completed on same day. (ii) If safaiwala not attended the complaint within the time frame as mentioned above, 50% of quoted rate shall be deducted from the contractor’s dues as a penalty. (iii) The contractor shall be responsible to maintain daily job completed by safaiwala deputed by him in the subject work and obtain the signature of I/C complaint cell / Engr-in-charge daily at 1700 hours on all working days. (iv) Attending one complaint and make it functional shall be measured as one Job.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for the following dia of pipe, complete all as specified and directed:- (a) 150mm bore

(b) 200 mm Bore

(c) 250 mm bore

Demolition of cement concrete of any description and in any position not otherwise specifically provided for , complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for , complete all as specified and directed.

Demolition of stone walling / brick masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for brick work with fly ash Bricks straight or curved on plan exec 6 mtr mean radius with modular bricks in CM 1: 6 complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, brought up to course, complete all as specified and directed

M & L for 75mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in hardstanding / approaches, finishing cement concrete surface even & smooth using extra cement and brooming etc complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in benching & copping to manholes etc., complete all as specified and directed.

M&L for three coats white wash on new plastered surfaces of wall including preparation of new surfaces, complete as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on stone / brick masonry work or concrete surfaces, surfaces has to be finished even and smooth with spong finish mixed with water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note :- Water proofing compound shall be measured & paid separately under respective item.

Supply only liquid water proofing compound, complete all as specified and directed.

Dismantling & breaking of drain pipes of 75mm to 110 mm dia of AC/ PVC including fittings, set in cement mortar or adhensive, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed. Note for item nos. 39 & 40:- Quoted rates shall be deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

S&F of PVC (SWR), 110mm bore junction with access door, single (Single Tee), equal or unequal, complete all as specified & directed.

S&F of 110 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F of PVC (SWR) bends with oval access door of 110 mm bore, complete all as specified and directed.

S&F of PVC (SWR) bends with oval access door of 75 mm bore, complete all as specified and directed.

S&F of PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access, complete all as specified and directed.

S&F of PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access, complete all as specified and directed.

S&F in repairs stainless steel grating of 100mm in size suitablr for nahni trap/floor including jointing, complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 (Using 20mm garded crushed stone aggregate) as in manhole covers and setting in cement mortar 1:4, complete all as specified & directed.

M&L for precast factory made manhole cover of medium duty, area of each cover 0.75 Sqm and above, 100mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars, complete all as specified and directed by Engr-in-charge.

M&L for precast factory made manhole cover of medium duty, area of each cover n.exc 0.36 Sqm, 100mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars, complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:2:4 type B1(Using 20mm graded stone aggregate) as in cement concrete in rounded or coping chamfered on edges of chequired tiles / interlocking tiles etc. complete all as specified and directed

M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor / pavement laid over and including 30mm thick stone dust cushioning, laid dry to the profile over hard concrete sub base filling complete all as specified and directed by Engr-in-Charge

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including provision of concrete bedding with and including PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed

S&F in repairs vitreous china wash down water closet pan, 'Pedestal white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices with and including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (Using 12.5mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes or as leveling course, complete all as specified and directed.

M&L for 16-18mm thick granite slab, one side pre-polished (of any type/colour) work (table rubbed and polished) as in steps, pillars, window cills / jamb, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius etc laid over and including 20mm thick screed bed in CM 1:4 including dismantling of existing stone slab & screed bed of any description and removing rubbish / debries etc. complete all as specified and directed.

Removing building materials etc to a distance exceeding 5 Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed

M&L for machine cut cudappah stone slab, 40-50mm thick, one side pre-polished, laid over and including 15mm thick screed bed in CM 1:4, set and jointed in grey cement slurry mixed with pigment to match the shade of slab including grinding, rubbing and polishing etc, including dismantling of old existing stone slab & screed bed and removing of debries etc. complete all as specified and directed by Engineer-in-Charge.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore GI pipe, complete all as specified and directed.

S&F in repairs 15mm bore GI pipe "medium grade" including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

S&F in repairs 20mm bore GI pipe "medium grade" including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

M&L for cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

S & F in repairs of 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F brass chromium plated shower rose, 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore, complete all as specified and directed.

S&F in repairs CP angular type stop cock conforming to CAT No. CON-053KN of "Jaquar" / 9210 of Prayag or of Equivalent cat part of makes as specified here-in-after, complete all as specified and directed

S&F in repairs health faucet, chromium plated, fancy type conforming to CAT No ALD-583KN of Jaquar / BEA-85 of Prayag or equivalent cat part from the makes as specified here in after, complete all as specified and directed.

S&F in repairs CP 2 way bib cock with wall flange conforming to CAT No. CON 041N of Jaquar or of Equivalent cat part of makes as specified here-in-after, complete all as specified and directed

S&F in repairs 15 mm bore PVC connection 600 mm long with PTMT nut and PVC washer (suitable for Hot & Cold water supply), complete all as specified and directed.

M&L for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiles including screed bed etc. and removing of debries complete all as specified and as directed

M&L for glazed ceramic coloured tiles of size 600x300x7-8mm thick as on vertical surfaces such as skirting, dados and riser to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick rendering in cement mortar (1:4) with and including triangular filleting in CM 1:4 on top edges including dismantling of old existing wall tiles including backing coat and removing of debries complete all as specified and as directed

M&L for PCC 1:3:6 type C-1, (using 20mm graded stone aggregate) of 75mm thick, laid in alternate bays as in path and plinth protection / hard standing flooring etc., finish the surfaces even and smooth with using extra cement, complete all as specified and directed

M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor etc., finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for precast coloured chequered cement concrete tiles, glossy finish of size 305x305x25 mm thick, machine pressed, set jointed and pointed with grey cement and pigment as in floor and cut and polished laind over and including 20 mm thick screed bed in cement mortar 1:4 including demolition of existing floor tiles including bedding layer complete all as specified and directed

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm² fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors etc complete all as specified and as directed.

shiva traders (BID ID -3309334)

PAL CONSTRUCTION (BID ID -3316380)

PRASHANT CONSTRUCTION (BID ID -3316071)

M/s.BAJRANG CONSTRUCTION (BID ID -3309803)