Construction of E type Qtr. For J.E. R.W. Section-II Kuliana for the year 2025-26

Civil

Excavation of foundation in hard soil within initial lead of 50 mtr and lift of 1.5 mtr etc including levelling and dressing the foundation trenches, stacking the excavated materials away from the work site etc as per the instruction of E.I.C.

Supplying, filling in foundation & plinth with well watered sand in layers not exceeding 150mm thick including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge.

Providing Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge.

Brick work with Fly Ash brick in foundation & plinth using 25cmx12cmx8cm size bricks having crushing strength not less than 35kg./cm2 with dimensional to lerance 2% in c.c. (1:6) after immersing the bricks for six hours in water before use in foundation & plinth, basement & for ornametal flower heads plinth moulding & similar such type of works with all necessary projection, cutting, moulding, corebelling, chamfering, watering & curing including cost, conveyance, royalties & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification * direction of the E.I.C.

R.C.C M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour,centering shuttering etc complete bu

Column Base

Column

Ground Floor

First Floor

Plinth Beam

Lintel

Ground Floor

First Floor

Chhaja

Ground Floor

First Floor

Stair Case

Ground Floor

Wall Beam

Ground Floor

First Floor

Roof Slab

Ground Floor

First Floor

Supplying and straightening bent up or coiled rods cutting, bending, cranking, hooking, welding (if required) the M.S.Rods or Tor steel & binding and tying the grills, hoisting, lowering & placing in proper position as required for R.C.C. works with all cost, conveyance & taxes of M.S. rods or Tor steel & binding wires of 18 to 20 gauge & labour with all T&P required for the work etc. complete in all floors (weight of binding wires and laping of MS rod will not be considered for payment & payment will be made on weight of M.S.rods or Tor steel only).as per direction of the Engineer-in-charge.

Ground Floor

First Floor

Brick work with Fly Ash brick in superstructure using 25cmx12cmx8cm size bricks having crushing strength not less than 35kg./cm2 with dimensional to lerance 2% in c.c. (1:6) after immersing the bricks for six hours in water before use in foundation & plinth, basement & for ornametal flower heads plinth moulding & similar such type of works with all necessary projection, cutting, moulding, corebelling, chamfering, watering & curing including cost, conveyance, royalties & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification * direction of the E.I.C.

Ground Floor

First Floor

20mm thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiselling the same and cleaning the surface by wire brushing laid to proper slope finished smooth, watering and curing including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete as per direction of the Engineer-in-charge.

Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge.

Ground Floor

First Floor

Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge.

Ground Floor

First Floor

Providing fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of approved make on 25mm thick bed of cement mortar (1:1) joint with neat cement slury mixed with pigment to match the shade of tile including polishing, rubbing etc. including cost, conveyance, royalty, taxes of all materials and cost of all labour T&P required for the work etc. complete as directed by the Engineer-in-charge.

Supplying fitting & fixing of Vitrified tile in dado in force treade or steps and including on 25mm thick bed of cement mortar (1:1) joint with net cement slowray mixed with prgment to materials the shades of tiles including rubbing & polishing etc. with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge

Providing fitting and fixing of M.S. doors, windows & grill gate of approved design and fixing in proper position including making holes in walls, R.C.C. structure and wood work etc. and making good to the damages to walls or R.C.C. structure including mending or cutting to sizes or grooves in walls and fixing with C.C. (1:2:4) with hard black crusher broken granite stone chips of 12mm with cost and conveyance, royalities of all materials, all labour taxes with all T&P etc. complete in all floors as per direction of the Engineer-in-charge.

Supplying, fiting and fixing of 35mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.

Supplying. fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.

Supplying and fixing of roller Blinds by fixing powder coated top channel, bottom channel with bottom end gap,control unit and good quality of 0.60 mm thick fabric of approved design and quality etc complete.

Painting two coats with any approved Enamel Paint over a coat of approved primer to wood work and iron work including cost of the primer and paint sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge.

Finishig Wall with Weather seal Coat two coats of approved shade to out side the wall surface including cost of all materials, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge.

Ground Floor

First Floor

Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.

Ground Floor

First Floor

Distempering two coats to walls with distemper of approved shade on old work one coat to give an even shade including cost of distemper per 1 sqm.(Ref. P-99, item-22 of A/R- 06). Data 10 sqm

Ground Floor

First Floor

Supplying. Fitiing and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm 2mm @ 0.90mtr.c/c and stanless square pipe bracing of size 32mm x 32mm 2mm in 3 rows in stair case as per approved design etc.complete.