SRSV_2024

SLIDE CALIPERS

SCREW GAUGE

Set up to measure radius of curvature of a convex/concave surface using Spherometer

Set up to find the co-efficient of friction between wood and glass using a horizontal board

Standard quality Hooke's law apparatus

Flywheel with shaft

Stoke’s law apparatus for viscosity measurement

co-efficient of linear expansion of the material of a rod.

BOYLE’S LAW APPARATUS

STANDARD FORTIN’S BAROMETER

HYDROSTATIC BALANCE

Set up to determine and verify the time period of oscillation of a cantilever

Set up to verify laws of refraction (Snell’s law) using a glass slab

set up to determine focal length and magnifying power of a convex lens by u-v method

Set up to verify Ohm’s law by plotting graph between current and potential difference.

To verify laws of resistances in series by P.O.box. And laws of resistances in parallel by using Ammeter and Volt meter

Kit to verify Kirchhoff’s law using electrical circuits

Set up to find resistance of a galvanometer by half deflection method.

Set up to convert a galvanometer into an ammeter.

Set up to verify inverse square law of radiations using a photo-electric cell.

PN Jn Diode characteristics trainer ( for Forward & Reverse characteristics curves expt) (Compact)

Parallel plate capacitor parameters measurement kit

Analytical Balance

Digital PH meter

Digital conductivity meter

Digital colorimeter

Complete set for Thin Layer Chromatography

Arsenic set (For Laboratory)

Digital Thermometer or Normal Thermometer

Water Bath

Redwood Viscometer

ABLES FLASH POINT Apparatus

Daniel - Cell for EMF measurement

Soil Core cutter

Hydraulic Bench with facility for 11 experiments

Ultrasonic Pulse Velocity Test Instrument for Concrete

Total Station

DO Meter

Conductivity Meter

Turbidity Meter

Arsenic Kit

Jar Test Apparatus

Balance

Hot Plate/ Stirrer

Filtration Assembly

Distilled Water plant

BOD Incubator

Vacuum Pump

Hot Air Oven

Vacuum desiccator

COD digester

Civil Engineering Model of Plumbing pipe fitting, complete set in a multistorey housing complex (Inclusive of all types of necessary connection)

Civil Engineering Model of septic tank with soak pit

Civil Engineering Model of Slab culvert, Pipe culvert

Civil Engineering Model of King post and queen post timber truss

Civil Engineering Model of Fink type steel roof Struss

Reinforcement details: One way slab reinforcement

Reinforcement details: Two-way slab reinforcement

Reinforcement details: Simple, continuous and fixed beam reinforcement (3Nos. Each)

Reinforcement details: Column and footing reinforcement (3Nos. Each)

Reinforcement details: Stair case reinforcement (dog-legged) (2Nos. Each)

Reinforcement details: Lintel with chajja showing reinforcement

Irrigation Engineering Model:

Transport Engineering Model:

Steel connection (riveted and welded):

Building Materials Model:Full Brick King closure,Queen closure

Building Materials Model:Brick joint and pillar

Environmental Engineering Model: Water treatment plant

Environmental Engineering Model: Waste water treatment plant

Hand held GPS

Volumetric flask Borosilicate 500ml A class

Plane Table Survey Equipment

SPECTROPHOTOMETER

Air Permeability Apparatus (Blaine type)

Vernier Transit Theodolite & Accessories

D.C. power supply

Anderson bridge to measure unknown inductance

Schering bridge to measure unknown capacitance

Single phase electronic (digital) energy meter

Three phase electronic (digital) energy meter

Kelvin double bridge

Maxwell's bridge

500V megger

Analog Oscilloscope (20MHz Dual Trace ) with Component Tester

Dual channel Digital Storage Oscilloscope 50 MHz.

C.T. & P.T. testing trainer kit

Function Generator

Training kit for study of Kirchhoff’s Current & Voltage Law

Series parallel resonance of R-L-C ckt.

Training kit for design of parallel resonance circuit

Training kit for design of series resonance circuit

Training kit for verification of- a) Superposition theorem. b) Thevenin’s theorem. c) Norton’s theorem. d) Maximum power transfer theorem.

Display board containing sample of different types of Overhead Conductors, Underground Cables.

Sample of different types of Line supports and Line Insulators.

Power Factor Meter

AC distributor simulator

Experimental setup for Speed control of 1 HP Induction Motor (Frequency Changing with required Panel & VVVF drive and other accessories).

Synchronization of two 3 phase alternators (1 KVA, 415V) by synchroscope &. Pannel should comprises of frequency meter: 2nos;

Experimental set up for load test of 3 phase 2 HP Induction Motor

Three phase, 415 V, 2HP SYNCHRONOUS MOTOR with excitation control

Slip ring I/M 3 hp,400v,1500 rpm to determine effect of rotor resistance on T/S curve

Experimental set up for load test and O.C. & S.C. test of three phase alternator.

The direct load test on 1 HP single phase induction motor to determine the efficiency and speed regulation for different loads.

Speed Control of the stepper motor with reversing facility

A.C.Motor Drives (variable voltage variable frequency)

Relay testing kit with relay to test neumerical/ static over current (Industrial grade)

Current differential relay , IDMT type 3 phase transformer with fault creation arrangement .

Testing of Directional Over Current Relay (DOCR) [ Industrial grade]by Relay Testing Kit.

Simulator for differential protection scheme for transformer with power system simulation kit.

IDMT type over current/ earth fault relay trainer kit.

Kit for demonstrating the operation of single phasing preventer by creating single phasing fault of a 3-ph induction motor with D.O.L. starter. :

Transmission line protection simulation Kit

Testing of static distance protection relay using Relay Testing Kit.

Pyranometer with Shading ring facility:

Complete set up of Poly crystalline silicon PV Cell to measure the cell parameters – O.C. voltage (Voc), Short circuit current (Isc), Voltage-Current-Power at Maximum Power point (Vmp, Imp, Mpp), Fill factor, Efficiency.

One piece Flat plate collector with complete set up and measuring facility of temperature, flow, pressure.

Box type solar cooker with varying reflector:

Complete set up to measure thermal performance of a solar water heating system

400W Small Wind Turbine (SWT) system to generate electricity

Complete set up of 40 Watt, 12 V DC solar street lighting system for student demonstration. Necessary components with installation are required.

Set up to test the proper functioning of DIAC to determine the break over voltage and plot its V-I characteristics

Set up to test the variation of R, C in R and RC triggering circuits on firing angle of SCR and observe the firing angles with R,C variation.

Set up to perform the operation of Class – A, B, C commutation circuits of SCR.

Set up to observe the output waveform of half wave-controlled rectifier using SCR with resistive load and determine the load voltage at different firing angles and observe the firing angles and load voltage in CRO.

Set up to observe the output waveform of Full wave-controlled rectifier with R load, RL load and with freewheeling diode and determine the load voltage at different firing angles and observe the firing angles and load voltage in CRO.

Set up to determine the firing angle using DIAC and TRIAC phase-controlled circuit on output power under different loads such as lamp, motor and observe the firing angles and load voltage in CRO.

Set up to perform speed control of DC series / DC separately excited motor using SCR and observe the speed in digital meterand firing angles in CRO

Set up to perform speed control of 3-phase Induction motor using PWM inverter. Interpret speed-torque characteristics. Use variable voltage variable frequency drive.

Training kit for 8051 Microcontroller having facility to interface with PC

a)Operation of a stepper motor with a fixed no.of steps and to determine the angular displacement per step by measuring the total angular rotation interfacing with 8051 microcontroller kit and PC. and also have b) 8051 microcontroller having facility of stand alone operation.

a)Setup for measurement of ac voltage, current, frequency and phase angle difference (either between two voltages or between voltage and current) using suitable PT, CT, Zero crossing detectors, A/D converters etc. using 8051 microcontroller kit and interfacing with PC.; also have b) 8051 microcontroller having facility of stand alone operation.

Setup for run and test Speed Control of a D.C. motor and note speed vs. Load characteristics at open loop condition using 8051 microcontroller kit and interfacing with PC.and also have b) 8051 microcontroller having facility of stand alone operation.

Setup for run and test Traffic light Control with 8051 microcontroller kit and interfacing with PC.and also have b) 8051 microcontroller having facility of stand alone operation.

Setup for run and test Over voltage/under voltage and over current/under current relay circuit by 8051 microcontroller kit and with suitable hardware circuit and also have b) 8051 microcontroller having facility of stand alone operation.

PLC TRAINER MODULE -1

PLC TRAINER MODULE -2

PLC TRAINER MODULE - 3

PLC TRAINER MODULE -4

Complete set up of PLC with analog and digital I/Os with PC

Push button switches

ON Delay timer

OFF delay timer

Three phase electromagnetic contactor

Make & test the control and power circuit for forward and reverse rotation of sq. cage induction motor using contactor circuit.

Make & test the control and power circuit for automatic star-delta starter operation of sq. cage

Dynamic braking of three phase squirrel cage induction motor using contactor control.

Set up to measure the output voltage of chopper for resistive load by varying the frequency and /or duty cycle of chopper.

Set up to measure change of speed of given D.C. series motor by varying armature voltage using step down chopper.

Set up to measure change of speed of the given D.C. separately excited motor by varying voltage using step down chopper.

Set up to control the speed of the separately exited DC motor by changing the firing angle of SCR using single phase full converter and measure the speed.

Set up to control the speed of a three phase induction motor by using constant V/f method and facility to plot the graph between speed and frequency.

Set up to control the speed of a three phase induction motor by varying frequency and facility to plot the graph between speed and frequency.

Set up to control the speed of a single-phase capacitor split phase induction motor using DIAC –TRIAC circuit and facility to measure speed.

Set up to control the speed of a DC motor using DC drives and microcontroller.

Experimental setup for Dielectric Strength test set for transformer oil

Experimental kit for the measurement of Linear displacement by LVDT & plotting of characteristics curve of it.

Experimental setup for Measurement of temperature using Thermocouple,RTD, Thermister.

Experimental setup for the measurement of Strain using Strain Guaze

Experimental setup for the measurement of flow of liquid using Rotameter

Stroboscope gun

Experimental kit of diffentiator and integrator using IC 741.

Experimentalkit for Instrumentation amplifier using IC 741.

Experimental set up to measure and control the temperature of furnace/ machine using thermocouple..

Heat run test of a single phase transformer

Infrared camera

Test kit for verification of Input and output characteristics of BJT in Common Base (CB) mode

Test kit for verification of Input and output characteristics of BJT in Common Emitter (CE) mode

Test kit for verification of the characteristics of JFET / MOSFET

Test kit for Relaxation Oscillator using UJT

Test kit for Voltage Regulator IC 7805, 7905

Test kit for Half Adder, Full Adder, Half Subtractor and Full Subtractor

Test kit for SR, D, JK and T Flip-flops

Test kit for Encoder and Decoder

Test kit for Multiplexer and Demultiplexer circuit

Test kit for binary Asynchronous or Synchronous counter

Test kit for controlled shift register to verify SISO, SIPO, PISO, PIPO operation

Test kit for A/D converter

Test kit for D/A converter

Automatic Power Factor Controller (3Phase, 3CTs)

Experimental set up to compare power consumption of different types of TL with electromagnetic ballast, electronic ballast and LED lamps

Experimental set up to determine the reduction in power consumption in star mode operation of Induction motor compared to delta mode at different load conditions.

Experimental set up to determine the reduction in power consumption by replacement of Fans and regulators

A model of fire tube boiler with accessories and parts for teaching students in lab

A prototype model of a water tube boiler showing various sections and parts such as water tubes , super heater economizer, firing burners, bottom and top headers, primary and secondary air circuits, pulverizes, air preheaters etc point for teaching students in lab

A model of a steam turbine prototype containing various parts like main steam stop valve, governor valves, runners blades, fixed blade , connecting tube etcfor teaching students in lab

Cut-section model of peltom wheel, Francis turbine and Kaplan turbines

A model of traction transformer to identify its various parts

A model of pantograph and bow collector

Actual Cut Section Model of Differential Gear Box

Actual Cut Section Model of 3:1 Speed type Synchromesh Gear Box

Actual Cut Section Model of Air Brake System

Cut Section Model of single plate coil spring type clutch

Model of Battery Charging System with Dynamo

Centrifugal Pump Test Rig

Electro-Pneumatic Trainer Kit

Oil Hydraulic Circuit Trainer Unit

Surface Grinding Machine

Dial Indicators (Metric Standard) with Magnetic Stand with Fine Adjustment

Cut section model of actual 4-cylinder 4-stroke diesel engine (Study and demonstration of the construction and working of four-stroke IC engine and identify different components of it.)

Four Stroke Four Cylinder Petrol Engine Test Rig (Conduct trial on Petrol Engine Test Rig to find out the Brake Thermal Efficiency and Brake Specific Fuel Consumption.)

Four Stroke Four Cylinder Diesel Engine Test Rig (Conduct trial on Diesel Engine Test Rig to find out the Brake Thermal Efficiency and Brake Specific Fuel Consumption.)

Single Cylinder Four Stroke Diesel Engine Cut Section Model along with Valve Timing Diagram Arrangement

Cut Section Model of Impulse Turbine

Model of Burden tube pressure gauge

Experimental set up of Separating & Throttling Steam Calorimeter with Boiler

Model of La-Mont Boiler (water tube boiler)

Cut Section Model of following Boiler Mountings and Accessories

Cut out Model of Reciprocating Compressor

Cut section Model of Centrifugal Compressor

Stefan-Boltzmann’s Apparatus,

THERMAL CONDUCTIVITY OF METAL ROD, For Laboratory, Copper

Cut Section Model of Shell & Tube Heat exchanger

Cut Section Model of Plate type Heat exchanger

Actual model (old) of a room air-conditioner (window / split type).

Digital Universal Testing Machine

Digital Torsion testing machine

Haemocytometer with Micropipettes

Sphygmomanometers

Stethoscopes Analog

Models for various organs

Specimen for various organs and systems

Human Skeleton and bones

IR Thermometer

First aid equipment

Stop watch

Dummy Inhalers and Nebulizer

Pharmacotherapeutic charts for various diseases & disorders

Surgical devices and Sutures

Digital BP Instrument

Digital Thermometer

Pulse Oximeter

ESR Apparatus (Westergren and Wintrobe)

Peak Flow meter

Stadiometer

Adult Weighing Scale (150 kg)

Glucometer

Permanent slide set of plants and charts for Pharmacognosy Lab

Various types of PPE Kits

Charts /displays/ AVs on tobacco control, glycemic index of foods, nutrition, reproductive health

Water Testing Kit

Permanent slide of different microbes

Analytical Balances for demonstration

Magnetic Stirrers with Thermostat

Wall Mounted Water Distillation Unit

Nessler’s Cylinders

Thieles Tube

Digital balance (10mg)

Standard sieves, sieve no. 8, 10, 12, 22, 24, 44, 54, 60, 80, 85, 100, 120

Microscopes Binocular

Magnetic stirrer, 500ml and 1 litter capacity with speed control

Tablet counter – small size

Electric water bath unit

Stalagmometer

Filtration assembly with Vacuum Pump

Andreasen’s Pipette

Micrometre slide Stage

Micrometre slide Eyepiece

Viscometer Ostwald

Stop watch

Refrigerator

Sieve shaker with sieve set

All-purpose equipment with all accessories

Liquid Filling Machine

Ampoule washing machine

Ampoule filling and sealing machine (Jet Burner)

knee cap

LS belts

Abdominal belt

Walker

Walking sticks

Different Types of bandages such As sterile gauze, cotton, crepe bandages, roll bandage etc.

Mannequins for CPR-1 (with indication Signals)

Mannequins for injection IV Arm

Variety of Needles

Variety of Syringes

Variety of catheters

IV set

Urine Bag

RYLE’s tube

Urine pots

Colostomy bags

Oxygen masks

GLASS FUNNEL Borosilicate, 4 INCH DIA

GLASS FUNNEL Borosilicate, 2 INCH DIA

GLASS CONICAL FLASK Borosilicate, 250 ML

STOPPERED CONICAL FLASK Borosilicate, 250 ML

WASH BOTTLES Borosilicate, 500 ML

GLASS DROPPER1ML calibrated

STAINLESS STEEL SPATULA

MEASURING CYLINDER Borosilicate, 100ML

MEASURING CYLINDER Borosilicate, 50ML

MEASURING CYLINDER Borosilicate, 10ML

BEAKER Borosilicate, 100ML

BEAKER Borosilicate, 250ML

Mortar & pestle China clay, Dia 13.5 x 11 H cm

Mortar & pestle Glass, Dia 13.5 x 11 H cm

Test tube Borosilicate glass 100ML without rim

Test tube Borosilicate glass 20ML with rim

Test tube Borosilicate glass 100ML with rim

Beaker with spout (suitable for heating) Borosilicate glass A class 50ml

Beaker with spout (suitable for heating) Borosilicate glass A class 1000ml

Beaker with spout (suitable for heating) Borosilicate glass A class 500ml

Erlenmeyer flask Borosilicate glass 250 ml

Bulb pipette Borosilicate glass 25 ml

Burette Borosilicate glass 50 ml

Burette stand with clamp (high)

Dropper

Fusion tube

Nessler cylinder

Nessler cylinder stand

Borosilicate bulb type 10 ml Pipette

Borosilicate graduated type 10 ml Pipette

Borosilicate bulb type 25 ml Pipette

Borosilicate graduated type 25 ml Pipette

Borosilicate bulb type 50 ml Pipette

Pipette Borosilicate graduated type 50 ml

Volumetric flask Borosilicate 1000ml A class

Volumetric flask Borosilicate 100ml A class

Volumetric flask Borosilicate 50ml A class

Volumetric flask Borosilicate 25ml A class

ELECTRO-SYS (BID ID -5268591)

PODDAR SYSTEM AND SERVICES (BID ID -5222471)

Lawrence and Mayo (India) Pvt. Ltd. (BID ID -5249317)

SUSHAMA ELECTRONICS (BID ID -5179005)

ADVANCE INSTRUMENTS (BID ID -5281219)

UNITECH CORPORATION (BID ID -5280490)

DELTA TECHNOLOGIES (BID ID -5268528)

PODDAR SYSTEM AND SERVICES

Lawrence and Mayo (India) Pvt. Ltd.

ABC Enterprises

DELTA TECHNOLOGIES

ELECTRO-SYS

UNITECH CORPORATION

ADVANCE INSTRUMENTS