REPAIRS AND MAINTENANCE OF ELECTRIC GEYSERS, SOLAR WATER HEATING SYSTEM, FAN AND OTHERS CONNECTED WORK IN CERTAIN MARRIED ACCN AND OTM ACCN UNDER GE (MCTE) MHOW

Amount

Identifying and rectifying the defects pertaining to Geyser,solar water heater of any type and nature such as taking down defective switch/socket/AC Box/MCB SP, loose connection, wiring short circuit any type, removing air lock or checking & replacing heating element/thermoastat /indicator/ PVC connection/geyser plug top/15 Amps switch & sockets,rectification of faulty electric circuits, tightening of loose connections, replacment of old u/s wiring/conduits/casing caping & connections etc. complete all as directed.

Identifying and rectifying the complaints pertains to ceiling fans/exhaust fans/wall fans/table fans and connects electric circuit, tightening of loose wirring/conduits /fan capacitors and connection carrying out minor repairs incl blade alignments , screwing/ tightening the nuts/bolts/washers etc incl taking down & refixing properly in the same position after repairs,complete all as specified and as directed.

NOTE FOR ITEM NO 1 & 2 :- (a) All T & P and labour team required for comprising the Nos of trained electricians & helpers will be provided by the contractor daily as directed. (b) Rep of the contractor will present in complaint cell & responsible for receiving & attending the complaints from 08.30 Hrs to 04.30 Hrs the time of lodging the complaint. In absence of rep of Contractor penel recovery as decided by GE shall be imposed on the contractor. (c) Cost of minor stores such as screws,clamps,insulation tapes,nuts/bolts, nail etc. of required size shall be deemed to be included in the quoted rates. (d) Complaints where complete replacement of faulty circuit/point wiring required,shall be measured separately under relevent item of this schedule.

M & L for Overhauling/Dismantling of defective/rusted Geyser of 25 Ltr capacity from different locations by removing inlet/outlet connections, taking out U/S parts by unscrewing bolts and nuts etc. Checking defects and re-assembling the Geyser after refixing serviceable/new parts & cleaning ,dicling and refixing only serviceable items and re-installing the Geyser in suitable place/position and connecting inlet-outlet connections & testing complete, all as specified and as directed by Engr-in-charge.

All as per item No-3 above,but capacity 50 litres geyser complete all as & directed.

Note for Ser No. 3 & 4 :- (a) Items required for replacement of U/S parts shall be measured and paid separately under relevant item of this schedule). (b) The element for Labour of new spare parts are deemed to be included in the quoted unit rate of above items

Dismantling defective Ceiling fan of 1200 mm sweep (i.e.,) down rod with its Canopies, Shackle, Blade,Condenser housing with its rubber bushes, split pins, unscrewing the body parts of Ceiling fan, taking out starter, rotor winding,ball bearing, gun metal bush etc. complete to carry out the following repairs :-

(a) Removing of burnt out fan winding and rewinding of starter winding with suitable size of Copper enamelled wire, (weight of copper coil shall not be less than the specified as in dismantled Fan) varnishing heating and testing as per manufactures design and specifications and as directed by Enge-in-charge. (b) Re-assembling complete Ceiling fan by fixing only serviceable of old/new spare parts (i.e.) rubber bush of shackle and condenser housing, condenser, gun metal bushes,blades, ball bearing, twin twisted Copper cable, down rod assembly with its shackle condenser housing and Canopies & split pins complete all as specified and design to give designed air delivery including greasing, oiling, cleaning outer body & surfaces etc complete all as directed.

All as per srl Item No.05 above but ceiling fan of 1400mm sweep.

All as per srl Item No.05 here-in-before but exhaust fan of size 230/300 mm sweep.

All as per srl Item No.05 here-in-before but exhaust fan of size 380/450 mm sweep.

All as per srl Item No.05 here-in-before but pedestal/Cabin fan/ wall fan of size 400 mm sweep.

All as per srl Item No.05 & 06 here-in-before but only overhauling of celing fan 1200mm/1400mm by greasing and oiling,replacement of unserviceable/defective components ,except rewinding of starter winding complete all as directed.

All as per srl Item No 07 & 08 here-in-before but exhaust fan of 230 to 450 mm sweep.

Note Sl.No.05 to 10.01 :- (a) Spare parts found unserviceable/defective shall be measured and paid separately under relevant item of this schedule as supply only. (b) The element for fixing of new spare parts shall deemed to be included in quoted unit rate of above items

Supply only spare parts of Ceiling fan 1200mm /1400mm sweep of different makes as required :-

(a) Condenser of capacity 2.5 to 3.15 Microfarad, 440 Volts, AC 50 Hz,plastic-casing, two terminal-copper wire, confirming to IS 1709 complete

(b) Rubber bush for shackle with bolt, nut and lock pin suitable for Ceiling fan 1200mm/1400mm sweep.

(c) Split Pin

(d) Ball bearing of size 62'01/62'02 as per sample.

(e) Gun metal bush as per sample.

(f) Condenser 4 MFD, 440 Volts, AC 50 Hz as per IS 1709

(g) Condenser housing, suitable for placing condensor at ceiling fan/ Exaust fan as per sample

(h) Fan canopy pvc body,white in colour, suitable for existing fan,as per sample and as directed.

M & L for preparation of old painted/rusted surfaces of 1200/1400 mm sweep ceiling fan and re-fixing the same after painting of the same with white colour synthetic enamel paint by spraying including filling cavities with filler & after cleaning all dust etc. and writing MES Number with black paint by skilled painter, complete all as specified and as directed. NOTE:-All T&P and labour team as required will be provided by the contractor and cost deemed to be included in the quoted rate.

Supply and fix in repair MS down rod 'medium grade' 15mm dia,in appropriate length of segments of required size of each down rod as per site requirement,including all fixing arrangments like hooks, clamps, nuts, bolts etc for hanging the ceiling fan at site, complete with making split holes, cut or threads at both end of pipe as required for hanging of Ceiling fan incl. painting of down rod with two coats of synthetic enamel white colour paint over a coat of primer complete all as specified and as directed.

S & F in repair 'U' shape shackle clamp assembly incl checknut, bolts, screws, washer, lock nut, rubber reel etc and connecting, complete all as directed.

Supply in Repairs/Replacements of following spare parts of geyser storage type of different make for capacity 25/50 ltrs (Make of spare parts shall be of existing make or as per sample approved by GE)

(a) Apparatus assembly duly prewired without heating element and thermostat/thermal cutout.

(b) Indication lamp (Green/Red) as per sample.

(c) Thermostat as per sample.

(d) Heating element 1.5 KW,trangle base type, as per sample.

(e) Heating element 1.5 KW,cup,base type as per sample and as directed.

(f) Geyser 'O' ring gasket as per sample.

(g) Geyser bottom plate as per sample.

(h) Geyser flange assembly nine holes as per sample.

(i) Fusible plug suitable for 25/50 ltrs capacity geyser, as per sample

(j) NRV Valve suitable for storage type geyser, 25 mm, as per sample,complete all as directed.

(k) NRV Valve suitable for storage type geyser, 12.5 mm (0.5"), as per sample,complete all as directed.

(l) Heating Element 3.00 KW, suitable for existing Solar/Electric (Dual type) ,as per sample and as directed.

S & F in repair PVC connction pipes double layer, heavy duty, ISI Marked,15mm dia both end socketed, inner threaded 450-600mm long, heavy duty of suitable thickness for hot/cold water complete all as per sample approve by GE.

M & L for taking down existing Electric geyser storage type of any size in position and re-fixing the same after preparation of old painted/rusted surfaces of 25/50 ltrs capacity geysers from different-different locations of MD Accn/OTM,including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, complete all as specified and as directed.

M & L for repairs of the the Faulty/unserviceable solar water heating system and making serviceable by filling the Distilled water, cleaning the solar touch end glass, cleaning of copper tubing inside the solar heating panel,stopping the leackage from union,control valve,NRV,PVC connection etc,incl repairs any type, complete all as specified and as directed. Note: Distilled water and new components used ,shall be measured and paid saperately under respective item of this schedule.

Supply only Distilled water suitable for solar water heating system

S & F in repair PVC insulated flexible cable three core Copper conductor of size 1.00 Sqmm, ISI marked, covered with white colour round insulation complete all as specified and as directed.

Supply & fix in repair sheet metal enclousure with a 3 pin (2 pin and earth) plug & socket complete with one MCB SP 20 Amps of breaking capacity 10KA, 'C' series, 240 volts complete all as directed.

Supply fix in repairs metal clad plug and socket single pole with earth, 230 volt 20 amp complete all as specified and as directed.

Supply and fix Electronic fan regulator, five steps, hume free, Socket type, 230 V,AC, single phase connection complete all as specified and as directed.

Taking down carefully point wiring of any type complete for light, fan ,bell,socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, conduit etc. including accessories and making good the disturbed surfaces to match with the existing complete all as directed.

Taking down submain wiring any type and any size and making good the disturbed surfaces match with the existing complete all as directed.

Taking down switch fuse/DB'S including MCCB/MCB'S any type and any capacity complete all as directed.

M & L for Point wiring with PVC insulated FRLS, PVC unsheathed cable, single core, stranded copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into with and including PVC casing-capping not less than 20mm wide, ISI marked, with 1.5 Sqmm unsheathed, stranded copper cable for continuous earth wire and including pressed steel concealed terminal boxes of reqd size made out of 1.2 mm thick sheet and covered with 2.8 mm thick plastic laminated bakalite (hylam) ISI marked sheet suitable for switches/sockets/regulators complete all as specified and as directed for the following :-

(a) One light/fan/bell point controlled by one switch

(b) One point for socket outlet 5 amp on independent board

(c) One point for socket outlet 5 amp on same board

All as per srl Item No 27 above, but with FRLS cable 2.5 sqmm stranded copper conductor FRLS with 2.5 sqmm copper conductor earth wire for switch/socket outlet 5 pin,15 Amps multipurpose on independend board complete all as directed.

M&L for Point wiring with PVC insulated,FRLS, PVC unsheathed cable, single core, stranded, copper conductor FRLS cable 1.5 Sqmm size, 1100V grade, drawn through existing PVC Conduit of any type and dia, with1.5 Sqmm unsheathed, stranded copper conductor FRLS cable for continuous earth wire green colour and including pressed steel concealed terminal boxes of reqd size made out of 1.2 mm thick sheet and covered with 2.6 mm thick white hylam sheet cover, of suitable size for mounting switches/sockets/regulators or Modular flush box for mounting modular switches/sockets/regulators etc complete all as specified and as directed for the following :-

(a) One light/fan point controlled by one switch

(c) One socket outlet 2/3 pin 5 amp multipurpose on same board

(d) One switch/socket outlet point 2/3 pin 5 amp multipurpose on independent board

All as per Item No 29 above, but with FRLS cable 2.5 sqmm stranded copper conductor for switch/socket outlet 5Pin,15 Amps multipurpose controlled with 2.5 sqmm copper conductor FRLS cable as continuous earth wire of green colour on independent board complete all as directed.

S&F switch piano flush type, 6 amps, 230V AC,single pole, one way complete.

S&F socket out let multipurpose suitable for 2 pin and 3 pin 5/6 amp type complete all as directed

S&F switch piano, flush type 15 amps,230V, AC Single pole, one way, complete all as directed.

S & F socket out let 2 in 1, multipurpose suitable for 2/3 pin 15 amp flush type.

S & F bell push,flush type 5 Amp, 220 V, single pole.

Supply and fixing ceiling rose, 3 phase /PVC /polycarbonate, isolated body for surface type, 65x50mm three terminal complete all as directed.

S&F angle type holder insulated body with back plate complete all as directed.

Supply and fix in repairs Modular Switch flush type 06 Amps single pole, one way complete all as specified.

Supply and fix in repairs Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type complete all as specified.

Supply and fix in repairs Modular Bell push flush type, 10 Amps complete all as specified.

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified.

Supply and fix in repairs Modular Switch 16 Amps single pole, one way complete all as specified.

Supply & fix in repairs modular fan regulator step type, 2 module type complete.

Supply and fixing in repairs white finished single mounting modular plates suitable for modular accessories of following sizes complete all as secified and as directed.

(a) Suitable for 1/2 modules

(b) Suitable for 3 modules

(c) Suitable for 4 modules

(d) Suitable for 6 modules

(e) Suitable for 8 horizontal modules

(f) Sutable for 12 horizontal modules

Supply and fix in repairs double door SPN DBs 8 ways powder coated suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as directed.

S & F in repairs MCB SPN 6 to 32 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and as directed. (Make:L&T/Havells/Legrand/Indoasian)

S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and as directed. (Make:L&T/Havells/Legrand/Indoasian)

S & F in repair MCB triple pole & neutral 63 amp, 415 volts, 'C' series' 10 KA breaking capacity & connection complete all directed. (Make:L&T/Havells/Legrand/Indoasian)

Supply and fix in repairs MCB Protected socket, 240 Volts,incl plug, socket,MCB SP, 20 Amp single pole, suitable and safe for Geyser,Air conditioners, Coolers, refrigerators etc, Including plug top and making good disturbed surfaces with existing finishes complete all as specified and as directed.

S&F( in building peripheri) energy efficient, compact street lighting 25 Watt, LED with deep drawn Alluminium housing complete with conncting wire and provision of GI bracket, clamp, nuts, bolts grouted in wall incl all fixing arrangement complete all as directed

S & F in repair of LED PL 18 W Lamp 4 PIN type (LED pin type 18 w lamp) suitable for Existing 2'x2' ceiling light fittings of 2X36/ 3X36 wattage type complete all as directed. Make-(Havells: cat no. PHOTONULTRAPLL419TL18WLED865SPC) or equivalent in Wipro/Crompton.

Supply and fix in repairs LED batten suitable for single T8 LED tube upto 1x22 Watt, without LED tube rod,pre-wired for LED tube, complete with all accessories duly connection with three core flexible copper cable and duly fixed on two Nos PVC square boxes complete all as specified and as directed.

Supply and fix in repairs retrofit LED tube light T-8 type, 1x20 Watt, 6000K with extruded Al heat sink for efficient heat dissipation complete all as specified and as directed.

Supply and fix in repairs LED tube light fittings 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and as directed.

S&F for energy saving recess/surface mounted luminaire 36/40/42W, high efficiency PMMA diffuser gives soft glare free light, suitable for 600X600 ceiling cut out, recess mounted 36W LED luminaire in MS housing (2'X2') incl Provn of three core cable of copper conductor of size 1.5 sqmm, making necessary electric connetion from ceiling rose to fitting terminal , fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all fixing arrangement complete all as directed. (Make:-Havells/crompton/Wipro/phillips)

Supply & fix Recessed mounted LED panel slim,compact,aluminium die castedge lite panel of 15 W with premium diffuser to ensure glare free & even distribution of light complete with electric connection all as specified and as directed. (Make:- Havells, Cat No. LHEBHEP7IZ1W015 or equivalent in Wipro/Phillips/Crompton).

Supply & fix surface mounted round LED panel of 12W, Al die cast body with premium diffuser to ensure glare free & even distribution of light complete with electric connection all as specified and as directed.

Supply and fix in repairs PVC rectangular blocks, for mounting,switch,sockets,fan regulator etc.with 3 mm thick plastic laminated sheet cover with closed recessed, designed and cutting module for fixing switches/sockets of any rating complete all as directed for the following sizes:-

(a) 100mm X 100 MM X 50 mm deep

(b) 175 mm X 100 MM X 50 mm deep

(c) 200 mm X 150 MM X 50 mm deep

S&F hylam sheet Incl cuttings module suitable for fixing 5/15 Amps switch/socket /fan regulator/indicator etc. of following sizes:

S&F in replacement 3 pin plug-top, 15A, 240, beckelite, heavy duty suitable for 16A socket outlet complete all as directed.

Supply & Fix in repairs/replacement plastic body exhaust fan AC single phase 230/ 240 V of size 200mm sweep with louver ,white in colour including duly connection with copper wire etc. and taking down old unserviceable exaust fan deposit to E/M Store complete all as specified and as directed.

Supply & Fix in repairs/replacement plastic body exhaust fan AC single phase 230/ 240 V of size 250mm sweep with louver ,white in colour making duly connection with copper wire etc. incl taking down and old unserviceable exaust fan and deposit to E/M Store complete all as specified and as directed.

Supply & Fix in repairs/replacement Metallic body Ventilation/exhaust fan AC single phase 230/ 240 V of size 300 mm sweep, including duly connection with copper wire etc, incl taking down and old unserviceable exaust fan deposit to E/M Store complete all as specified and directed.

Supply & fix in repairs and replacement testing of Energy efficient 5 Star BEE rating, electric geyser of 25 liters capacity with Fiber/ceramic body with puff insulation inner tank ceramic with all in -built safety accessories like thermo start / automatic thermal cut out with ON/OFF/Cut out indications all pre wired and additional safety accessories like ELCB ,pressure release valve, non return valve in same or other position as ordered with the help of suitable size of nuts & bolts making necessary electrical connection incl taking down and deposit of old unserviceable Geyser to E/M Store complete all as directed .

Supply & fix in repair and replacement of electric wall fan of 400mm sweep, 230 Volts single phase,white in colour, complete with all accessories like nuts, bolts, clamps etc and connection from ceiling rose complete all as specified and as directed .

Supply and fix in replacement, Side Holder & New Rotor Holder suitable for FTL T5 & T8 fittng complete all as specified and as directed .

Supply & fix in replacement, electric bell, ding dong , AC, 220 V, single pole, complete all as directed.

Supply and fix in replacement, compact electronic ballast suitable for any type fluorescent tube/CFL light fitting of 1x36 watt complete all as specified . Make-Havells/Bajaj/Crompton.

Supply and fix in replacement, compact electronic ballast suitable for T-5 type fluorescent tube lights fitting of 1x28 watt complete all as specified . Make-Havells/Bajaj/Crompton.

M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surfaces of wall all as specified and as directed.

M&L for Sub main wiring in repairs with two runs of single core FR PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

SAHYOG ELECTRIC

Mighty Steel Sales Crop

J K Enterprises