Maintenance work

Amount

Supplying and fixing single skin plywood using 2" x 1" Aluminium Channel 2"-0" intervals on both directed and fixing to the existing wall portion and fixing 12mm thick anti termites water proofing plywood using screws etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Supply and fixing the high quality wall papper of approved colour, design including labour charges for forming wall surface scraping sand papering, applying wall gum, fixing wall paper in position without damaged etc., complete as directed by the departmental officers.

Supplying and fixing of special type high quality roller blinds of approved quality and colour inclusive of all accessories as per site condition and cost of all materials and labour charges and as directed by the departmental officers. (The Quality and shade of vertical blinds should be got approved from the EE before use on work.)

Supplying and fixing of roller blinds of approved quality and colour inclusive of all accessories as per site condition and cost of all materials and labour charges and as directed by the departmental officers. (The Quality and shade of vertical blinds should be got approved from the EE before use on work.)

Paving the floor with best quality Double charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing in position Long body tap (heavy duty) of Jacquar make or equivalent conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing the Angle cock with new one of Jaguar make Angle cock CP of approved quality and make including labour charges for fixing the shower rose in its position and as directed by the departmental officers.

Supplying and fixing 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coats of plastered wall surface with Exterior emulsion paint of first class quality and of approved colour without primer, including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Collecting the earth debries using tipper machinery from work spot and dumping the same into low lying area to a distance of 3 Km away from the site etc., complete complying with standard specification and as directed by the departmental officers.

GST at 18%

S.P Muthu Constructions (BID ID -1265324)