Providing urgent Misc electrical works under AE(E)KBN,MTNL,ND

Amount

Supplying and fixing DP Sheet steel enclosure on surface / recessalong with 25 Amp240 Volts C curve DP MCB complete with connections , testing and commissioning et c as reqd

Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate as required .

Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required.

Providing and fixing of Internet RJ 45 (IO) Complete with PVC box and two module plate etc complete as reqd. ( Making Dlink )

Providing and fixing wall mounted decorative light with lamp holder and bulb (7W/9W) etc as reqd. Make – Havells .

Providing and fixing of 5 watt, 1 feet long led mirrior light fitting, operation on 230Volt 50Hz A/c supply and fixing on the wall with fixing accessories and connect etc complete as reqd. Make Havells

Providing and fixing of 9 walt led downlighter operation on 230Volt 50Hz A/c supply and fixing in the existing fall celling and connection etc complete as reqd. Make Havells

Sitc of energy efficient altera modern 595mm X 595 mm size led luminaire having following specification i/c deismantlign of existing outlived/ Faulty convention luminaire with brightness SMD LEDs , making suitable arrangement for installation etc complete as reqd. in all respected to the entire satisfaction of engineer – in –charge :- a) wattage 34 walts to 36 walt + 10% b) system luments efficacy : Note less than 100 Lumen per watt .( Make Havells Model no VENUSNE02X2PLR36W LED857 POTR )

S/F 1200 mm sweep AC 230 volts single phase ceiling fan with all accessories including blades capacitor connection testing etc as reqd.(M/S Cromption /USHA/Orient/Bajaj/Luminous/kaithan/Crompton make)

Replacement of existing Gate light with new 36/40 W LED post-top Gate Light fitting with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source & suitable modification work of existing pole according to the size of above fitting etc and dismantling the old faulty fitting etc as reqd (Make: Surya Model No. SLE PT 30W-ETPP or equivalent model of Crompton/ Havells / Bajaj / Philips/Syska/Orient/SS)

SITC of 7 to 9 watt energy efficient LED bollard light fitting(minimum up to 500 mm height (apx ) with LED bulb of 9W) i/c grouting nut bolt in existing foundation etc as required. (Make : Philips / Bajaj / Havells/surya/polycab/SS).

S/L of following sizes PVC insulated and PVC sheathed armoured copper cable and fixing on the wall /existing pipe/laying in under ground etc as reqdMake-M/S poly cab/KEI/Havells/Finolex a) 3 x 1.5 sqmm

Supplying/Laying /Fixing of following size GI Pipe in floor /road i/c cutting of floor /road & repairing the same with CC (1:2:4)etc as per requirement suitable for crossing of required size armoured power cables etc as required. (a) 65 mm dia GI Pipe

Replacement/S/F pole box of size 200mm x 150mm (app.) made out of polycarbonate thermoplastic enclosure shock proof, rust proof, water proof having internally embedded gasket, fixing on existing GI poles with 2 nos. factory fabricated GI clamps (wherever required)/ pole box fixing arrangement, complete with 1 no. 6 amp DP MCB of approved make and interconnections etc. as reqd. (Pole box make: Sintex)

S/F 450 mm sweep single phase 230 volts air circulator heavy Duty fan complete with all accessories i.e. fan blade, capacitor and fixing on wall connection earthing as reqd (M/S Almonard/crompton/Havells Make)

P/F CC Foundation of size 600 mm x 300 mm of ratio 1:2:4 i/c providing suitable size of GI pipe( hockey pipe) for incoming and out going cables, excavation & plastering works suitable for bollard light etc complete as reqd

SITC of following type 230 V 50 Hz AC supply metal exhaust fan with louver shutter in existing opening with necessary arrangement i/c connection etc as reqd(M/s Crompton/Usha/Havells/Almonard make with ISI Marked)a)450 mm (18") Exhaust fan

600 mm (24") Exhaust fan

Star Electric Works