PERIODICAL SERVICES TO BLDGS UNDER AGE B/R-II AT GE AMRITSAR CANTT

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and directed by the Engineer-in-charge.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement ; Complete all as specified and directed by the Engineer-in-charge.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; Complete all as specified and directed by the Engineer-in-charge.

Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement ; Complete all as specified and directed by the Engineer-in-charge.

Material and Labour for preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment ; Complete all as specified and directed by the Engineer-in-charge.

Material and labour for preparation of newly plastered/old decorated surface of wall and applying two coats of oil bound distemper with necessary putty filling ; Complete all as specified and directed by the Engineer-in-charge.

All as per item No 06 above but on ceiling surface. ; Complete all as specified and directed by the Engineer-in-charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interoir paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for preperation of OLD decorated surfaces of walls by scraping and washing down with, removing all acales/dirts and greasy spots and applying one coat of oil bound distemper over and including applying 1mm thick plaster of paris putty to prepare the surface even and smooth including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for applying one coat of whitewash on ceiling including preperation of OLD plastered surfaces including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for Preparing of OLD decorated brick/concrete plastered/un-plastered surfaces including scrapping of old existing treatment of walls pillars cornices and apply one coat of weather proof exterior paint incl filling putty in depression and making smooth surface including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge.

Material and labour for complete removal of existing treatment of brick/concrete plastered/un-plastered surfaces of walls, Pillars, cornices , Chaajas, facia etc by scrapping mannually as well with mechanical means to make the surface free from dust, loose paint and loose plaster to be completely removed & repair of external surfaces of walls, Pillars, cornices , Chaajas, facia etc including preparation of old surface by filling cracks with cement based putty paste and make good smoothen surface by sand paper and applying two coats of premium quality Cement Base Paint of approved colour & make over & including one coat of Cement based exterior grade primer , including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge. Note :- (i) Premium Cemnent Base Paint and Primer shall be diluted with water as per manufacture's instruction . (ii) Allow 6-8 hrs to dry the surface in subsequent coats of paint . (iii) Necessary scaffolding at any height is included in the quoted rates of this items complete all as specified and directed. (iv) Make (1st Quality) :- Snowcem, Asian, Jenson & Nicholson, Berger, Duracem, British Xtracem

Material and Labour for Preparing of OLD decorated brick/concrete plastered/un-plastered surfaces including scrapping of old existing treatment of walls pillars cornices applying one coat of white wash and making smooth surface including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for Preparing of OLD decorated brick/concrete plastered/un-plastered surfaces including scrapping of old existing treatment of walls pillars cornices applying one coat of colour wash and making smooth surface including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for apply One coat of synthetic enamel pain on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of OLD surfaces including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for One coat of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described including prepration of OLD surfaces including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for Preparing of OLD decorated brick/concrete plastered/un-plastered surfaces including scrapping of old existing treatment of walls/pillars cornices/stone kerb and applying one coats of synthetic enamel paint and making smooth surface ; Complete all as specified and directed by the Engineer-in-charge.

Material and Labour for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm height ; Complete all as specified and directed by the Engineer-in-charge.

RAJ KAMAL BUILDERS (BID ID -3172695)