REPAIR/MAINT OF STREET LIGHTS/SECURITY LIGHT FITTING INCL FLOOD LIGHT AT OTM ACCN AT CME

Amount

Excavation in trenches n. exc. 1.5m wide and n exc. 1.5m in depth for taking out/laying cables and getting out in soft/loose soil all as directed.

Excavation in trenches n. exc. 1.5m wide and n exc. 1.5m in depth for pole foundation/laying cables and getting out in Hard/dense soil all as directed.

Excavation in trenches exceeding 1.5m wide and n exc. 3 m in depth for pole foundation/laying cables and getting out in Hard/dense soil all as directed.

M & L for bituminous road cutting to a width of 45 cm and depth 50 cm for laying UG cables and making good with cement concrete 1:3:6 type C 1 (using 20 mm graded stone aggregate) all as specified and directed.

Returning filling in, including, spreading, leveling, watering and well ramming in layers n exc. 25 cm all as specified and directed.

Removing surplus excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point all as directed.

Supply, laying and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured , electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade cross sectional area 4 core 16 Sqmm in and including taking out old one all as specified and directed.

All as per item 07above, but of the size 4 core 25 Sqmm

All as per item 07 above, but of the size 3.5 core 35 Sqmm

All as per item 07 above, but of the size 2 core 10 Sqmm

Supply & Laying of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 77 mm and inner dia 63 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable incl couplers & bends complete all as specified. Make : REX POLYEXTRUSION LTD or its equivalent as approved

S & fix LT Cable joining kit heat shrinkable complete with jointing materials suitable for LT Armoured cable 4 core of size 25 to 50 Sqmm all as directed. Make : Denson/3M/Raychem/m seal

Cutting of tree branches of any girth along OH lines & street light pole at a distance not less than 2 metre on either side of the pole cleaning of bushes and shrubes of any type along entire RM of pole. Cleaning /prunning should be carried out as and when required during entire running period of contract as directed.

Taking down and refixing after repairs of street light LED fittings/flood light fitting on pole or high mast of any type, size or at any height manually or with the help of hydraulic street light repair vehicle including replacement of damaged wire connection from kiosk box to LED fitting/high mast fittings, LED lamp, electronic driver etc. Note :- 1. Contractor is responsible to arrange electronic driver for unsv fitting as per existing make and capacity. 2. Electronic driver will be paid seperately. 3. Ladder alongwith vehicle will be borne by Contractor and same will be included in quoting rate.

Supply and fix 'ICON' electronics LED driver Suitable for LED Street light fitting 120 to150 watt all as specified and directed.

Supply and fix 'ICON' electronics LED driver Suitable for LED Street light fitting 90 watt all as specified and directed.

Supply and fix 'ICON' electronics LED driver Suitable for LED Street light fitting 60 watt all as specified and directed.

Supply and fix 'ICON' electronics LED driver Suitable for LED Street light fitting 45 watt all as specified and directed.

Dismantling and taking down old unsv street/security lights and Material and labour for new LED street light fittings of 45 watt system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection more than 10kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Make Havells cat part No ENDURAPEARLNEOSL45WLED757SASYTOPC or equivalent of CG/philips/Surya

Dismantling and taking down old unsv street/security lights and Material and labour for new LED street light fittings of 60 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection more than 10kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Make Havells cat part No ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent CG/philips/Surya

Dismantling and taking down old unsv street/security lights and Material and labour for new LED street light fittings of 90 watt system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection more than 10kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Make Havells cat part No ENDURAPEARLPLUSSL90WLED757SASYTOPC or equivalent of CG/philips/Surya.

Dismantling and taking down old unsv street/security lights and Material and labour for new LED street light fittings of 120 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection more than 10kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Make Havells cat part No ENDURAPEARLMAGSL120WLED757PASYTOTGASTHO or equivalent CG/Philips/Surya

Dismantling and taking down old unsv street/security lights and Material and labour for new LED flood light fittings of 120 watt system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection more than 10kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. JETAIRISFLS 120WLED757APNBLT G Havells or equivalent of CG/philips.

Dismantling and taking down old unsv floor lightss and Material and labour for new LED flood light fittings of 60 watt system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, TOP opening separate driver compartment with frame, IP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 90 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection more than 10kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as directed by Engineer-in-charge. Make Havells cat part No JETA QUANTOPLUSFLP60WLED757SYMLENS or equivalent of CG/philips.

Supply and fixing or passing through pipe, 1100 volts grade heavy duty, PVC insulated round 3 core 2.5 sqmm copper cable including electrical connection complete all as specified and directed by Engr-in-Charge. Make:-Havells/finolex/Plaza Note

Taking down UNSV Street light bracket and M & L new street light bracket made out of GI pipe medium grade 32 mm bore approx length not less than 120 cm bent to shape including new clamps made of MS flat of size 40x5 mm thick including cutting ,welding ,drilling holes ,nut,bolts washers etc including two coat of aluminium paint over one coat of red oxide primer on MS work complete all as specified and as directed.

Taking down UNSV fabrication box and M & L for fabrication of Kiosk box made out of fibre material complete with TPN ,aluminium bus and suitable for one number MCB (SP) including one No MCB (SP) 6 Amps 240 volts with glands for incoming & out going cable including fixing of flat iron clamps of size 20x4mm on PCC/Steel tubular pole complete all as specified and as directed by Engr-in-Charge. Make: Havells/Sintex.

Taking down UNSV fabrication box and M & L for fabrication of Kiosk box made out of fibre material complete with SPN ,aluminium bus and suitable for one number MCB (SP) including one No MCB (SP) 6 Amps 240 volts with glands for incoming & out going cable including fixing of flat iron clamps of size 20x4mm on PCC/Steel tubular pole complete all as specified and as directed by Engr-in-Charge. Make: Havells/Sintex.

Material and labour for replacement of old broken ACSR with aluminium conductor steel reinforced streching without kinks / bends and binding with insulators on street light poles complete all as specified and directed by Engineer-in-Charge.

Material & labour for replacement of old cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed inclusive of one primer coat, one under and one finishing coat of aluminium paint all as specified including taking down the old one

M&L for replacement of GI pipe light grade with all connected accessories of dia 40 mm complete including Clamps nut bolts saddle etc all as specified and directed by Engineer-in-Charge.

Dismantling and removing and setting aside with CME areas PCC poles any type/size by breaking PCC foundation after disconnecting electrical connection and removing old material from site for taking credit and making good the disturbed surfaces incl site clearance complete all as specified and directed by Engr-in- Charge.

Dismantling and removing and setting aside old unsv steel tubular pole any type/size by breaking PCC foundation after disconnecting electrical connection and removing old material from site for taking credit and making good the disturbed surfaces incl site clearance complete all as specified and directed by Engr-in- Charge.

M&L for steel swaged poles complete with cast iron base plate, finial taperplug, bolts, nuts and screws as specified type 410 SP-31 (9.0 metres long) and including painting with two coats of synthetic enamel/ aluminum paint over a coat of red oxide zinc chrome primer including preparation of new surfaces all as specified .

M&L for providing plain cement concrete type D-2 , 1:4:8 (using 40mm graded stone aggregate) in foundation filling and mass concrete all as specified and directed.

M&L for providing plain cement concrete type C-2, 1:3:6 (using 40 mm grade stone aggregate) as in coping, finished even and fair, including necessary from work all as specified and directed at site.

Material & Labour for surface cleaning of steel tubular poles including removing rusted particles and painting with two coats of synthetic enamel/aluminium paint over a coat of red oxide zinc chrome primer including cross arms, bracing, supports, clamps, eye hooks, security light bracket, clamp etc incl repairing and painting on coping with cement base white paint complete all as directed. Note: (i) The quoted rate shall includes marking of numbers on each pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the repairing of coping with cement / PCC.

Material & Labour for cement based paint for PCC pole including painting with two coats of synthetic enamel/ aluminium paint over a coat of red oxide zinc chrome primer to cross arms, bracing, supports, clamps, eye hooks, security light bracket, clamp etc incl repairing and painting on coping with cement base white paint complete all as specified and directed. Note: (i) The quoted rate shall includes marking of numbers on each LT pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the repairing of coping with cement / PCC.

Material & Labour for replacement of old UNSV MCCB of any type/capacity with new MCCB FP 32 Amps 415 AC, 50 Hz, 25kA thermal magnetic release adjustable type complete all as specified and directed. Make : Indoasian cat part No 830267/L&T/Legrand

Material & Labour for replacement of old UNSV MCCB of any type/capacity with new MCCB FP 63 Amps 415 AC, 50 Hz, 25kA thermal magnetic release adjustable type complete all as specified and directed. Indoasian cat part No 830270/L&T/Legrand

Material & Labour for replacement of old UNSV MCCB of any type/capacity with new MCCB FP 100 Amps 415 AC, 50 Hz, 25 kA thermal magnetic release adjustable type complete complete all as specified and directed. Indoasian cat part No 830272/L&T/Legrand

Supply and fixing in replacement three pole Contactor 63 A Current Rating 70A General use 10A, 415V with coil Make L&T Model MNX 70 Three pole contactor complete. Make L&T cat part No CS97076/Legrand/schneider

Supply and fixing in replacement MNX 50 to 80 spare coil for three pole Contactor complete all as specidired and directed. Make : L&T cat part No CS96318/Legrand/scheider

Supply and fixing in replacement Digital timer switch with inbuilt backup current capacity 16 Amps operated on 415 volts AC 50Hz complete all as specified and directed. Make: Indoasian cat part No TDA43111/ Legrand/Indoasian

M&L for fault detection in damaged UG cables using cable fault detector/locator, vehicle mounted to accuracy of 2m for various locations inside CME for UG cables of any size & any type upto 1.1 KV grade including excavation & earthwork in any type of strata of size 4x2x0.6m to visually inspect/repair the damaged cable as and when directed by Engr-in-charge.

M & L for Preparation of old painted surfaces of LT Panel or Street light Panel covered by dust and other deposited materials by cleaning from Panel of Size upto 100 X 100 X 50 cm including Repair of panel door, hinged nut .bolits clamp . etc .painting with one coat of aluminium paint complete all as specified and directed.

Supply and fix decorative extruded aluminum cylinderical shape LED bollard light 9 watt with integrated driver for soft and comfortable uniform light distribution for garden lighting, path ways and landscaping area lighting complete all as specified and directed. Make : C&S cat part No LTGLCR9WLED/CG/Wipro

Supply and fixing new generation post top energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs 25W as light source including taking down old fitting. Make- Havells cat No RUBYPT25WLED757PSYMTOPC or equivalent to CG/Philips.

Material & labour for earthing complete with galvanized steel earth electrode plate of size 60cmx60cmx6mm thick buried directly in ground/earth pit not less than 2.25 mtr deep below normal ground level and top edge of earth electrode not less than 1.5 mtr below normal ground level and connected with GI earth wire of size 4 mm by means of nut, bolts, washers etc to eqpt/machinery all as shown in electric plate No 3 of SSR Pt I including PCC (1:3:6) pit, pit cover 50mm thick RCC 1:2:4 type B-1 using 8mm tor steel bars @10cm C/C both ways, 20 mm bore medium grade GI protection pipe, watering pipe 20mm bore medium grade, funnel, wire mesh, also including earth work, common salt, charcoal dust complete, including taking down old unserviceable earthing all as specified and as directed by Engineer-in-Charge. (Note:-Earth wire to be secured on bus bar insulators and insulators shall be fixed on pole not more than one metre apart with MS clamps made out of 25x4mm MS flat with nuts, bolts and washers and GI wire shall be fixed in such a way that wire should not be touch on pole in any case)

ganesh electricals and airconditioners

Sachin Electricals

M/S kirpan Enterprises

SKS Electricals

Mahindra Electric Stores

metro electrical services