CONSTRUCTION OF NEW COURT BUILDING AT JATH IN TAL- JATH DIST -SANGLI

Amount

Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete.

Basement floor

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Basement floor

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means

Basement floor

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means

Basement floor

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift from3m To 4.5m). By Mechanical Means

Basement floor

Conveyance of material/debris at a distance of 2 Km as directed by the Engineer-In-Charge.

Basement floor

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Basement floor

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper.

Basement floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Basement floor

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )

Basement floor

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)

Basement floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Basement floor

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. )

Basement floor

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Basement floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( Basement floor ) (RA Serial Number: 16)

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete.

Basement floor

Ground Floor

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ( Basement floor )

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing sky light in R.C.C. roof including frame made of M.S. angle 50 x 50 x 6 mm with hold fast, sheet glass 12 mm thick, Chicken mesh 24 gauge with all accessories and required fixtures and fastening fitting including painting etc. complete.

Terrace Floor

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.

Basement floor

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete

Basement floor

Terrace Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. ( Basement floor )

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Terrace Floor

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 1200 mm

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Providing leather finished polishing to Kota / Marble / Shahabad / Kadappa Stone slab by continuous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. ( Basement floor ) (RA Serial Number: 120)

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish

Ground Floor

First Floor

Second Floor

Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete

Ground Floor

Fire Door 55mm 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. Providing of 120 min Fire rated doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test House, Govt of India laborator and/or with Central Building Research Institute, Govt of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non Combustible by Nature"). a) Door Frame: Supplying & Fixing frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

b)Shutter : Supplying & Fixing of 55mm thick asbestos free criteria checked - fire, heat and smoke resistant composite Fire check Door Shutter complying with with fire performance - FD 120 as per IS:3614 (part - II) comprising of 2x8mm Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in vaccum pressure impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood, densified to 810 Kilogram/cum) frame work of 100x32 mm with 32mm thick infill of ceramic fiber (density 128 Kilogram/cum), vermaculite mix faced with 3mm Fire retardant High Density fibre board, internally lipped with hardwood beading and pasted in Hydraulic Press under 25 MPa, spray quoted with 2 coats of in-tumescent paint of minimum 300 micron, and with single row of Brush- Type intumescent strip of size 10mmx4mm affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom, without any external lipping.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete

Ground Floor

First Floor

Second Floor

Third Floor

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.

Ground Floor

First Floor

Second Floor

Third Floor

Heavy duty Steel doors: Fabrication and supply of MILD STEEL DOORS of 1.025m x 2.1m Size with Single Leaf outer frame made of 50x50x5 mm equal M.S.L angle and shutter frame strengthened by stiffeners of 2 Nos horizontal MS. L angle 50x50x5 mm, vertical Bright bars 20mm dia fixing in holes having spacing 70mm centre to centre, fixing Steel door to lockup partion by 1 no aldrop Iron Oxidise 300*16mm with special locking arrangment, 1 nos. of handles iron oxidised 150 mm fixing the shutter with 3 Nos. of hinges iron oxidised 100 mm with outer frame of the door Including all necessary labour, welding, transportation, finishing, lead, lift, cleaning etc, complete. As per Drawings, specification: As Directed by Engineer In Charge

Ground Floor

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. ( Basement floor )

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box.

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. Note While arriving at the rate of item of item weight at 6.90 Kilogram/ One Square Metre is considered. b) Powder Coated

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

FALSE CEILING SYSTEM GI METAL BIOGUARD CLIP IN PLAIN TILE WITH CARRIER SYSTEM 600 X 600MM Providing & Fixing horizontal level suspended ceiling comprising of GI Bioguard Clip-in Plain Tile 600x600mm (Nominal Size) tiles of 120 gsm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 0.5mm thickness as per in IS:513 (1994) in Global white color with concealed suspension system having a bevelled edge of 3x3mm and height of 33mm on one side and 18mm on the other side. Tiles shall be flattened by precision leveller to minimize sag to less than 1/400mm. The tiles shall have double round pip of ɸ 2mm and ɸ 6mm for secure engagement and levelling respectively, along with swing down feature and special tabs to allow removal of tile to enable plenum access. The coated surface of the tile shall exhibit anti-microbial properties (eradication and inhibition of growth) and shall achieve up to 99.99% reduction in bacterial activity as per ISO22196:2011. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM D523. The tile shall have scratch, mar & abrasive resistance properties. The tile shall have a Light Reflectance of ≥ 63% in accordance to ASTM 1477-98 and Fire Performance of class 0/1 as per BS 476 Part 6 & 7 in module size of 600x600mm. SUSPENSION & INSTALLATION: Shall comprise of 3000mm long ‘C’ channels of 38H x 12W mm and 1mm thick spaced at 1200mm centre to centre securely fixed to the structural soffit using threaded rod (Approved make/Third Party Supply) connecting to C- channel hanger of 109x18.5x16.5mm at 1200mm C/C and anchor fastener (Approved make/Third Party Supply). The last hanger at the end of each C-channel shall not be greater than 600mm from the adjacent wall. Use a C-channel connector of 99.5x35x 9mm for splicing together two pieces of C-channels. 4000mm Clip-in bar of 16W x 40H mm

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Fine Fissured (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.6, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 31 %. The tile shall be laid on precoated G.I channel height of 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kilograms/M2 and pull out stength of minimum 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. product approved in GRIHA and BS 476 etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. Note While arriving at the rate of item of item weight at 6.90 Kilogram/ One Square Metre is considered. a) Colour anodized

First Floor

Second Floor

Third Floor

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and applying texture plaster of STONETEX - TRAVERTINE SERIES - ST-2002 special luxurious stone finish coating (3 product type – 6 coat system) for exteriors and interiors. Texture midcoat incorporating natural stone granules like natural Sandstone, Granite, Limestone, Ceramic chips, natural sand etc. including grooves to be provide as per design and drawings. Apply two coats of under coat primer by roller or brush then apply masking tape to create grooves as per design and drawings. First coat of texture midcoat finish by spray gun, evenly over the entire surface. Apply second coat of texture midcoat finish by spray sprinkle method, evenly on the whole sea of the previously dried first coat. Apply two coats of top protective coat evenly on the surface including grooves with roller or brush. It should be water based and ecofriendly product including preparing the surface, scaffolding etc. complete as directed by Engineer in-charge.

Ground Floor

First Floor

Second Floor

Third Floor

Providing & fixing CLADDING TYPE - 84R louvers of approved color consisting of panel 84mm wide 16mm deep x 0.6mm thick with 30mm gap with round edges panel length up to 6 Mt coil coated on continues paint Line double baked & roll formed from enameled corrosion resistance. Aluminium Alloy AA3005 (Al. Mg.) for higher strength & good roll forming characteristics Panel shall be clipped to baked enameled aluminium cladding type panel stringer of 33 mm wide & 86mm deep X 0.95 mm thick in a standard Length of 5 Mt made of double baked enameled Aluminium alloy AA5050 (Al. Mg.) black with cut-outs to hold the panel in a module of 86mm center to center at a distance of 1 Mt. The Carrier shall be fixed to suitable structure by means of rigid fixing details including Paint Finish : Aluminium panels shall be cromotised for maximum bond between metal & paint enameled twice under high temperature one side with full primer & luxacoat finish. The other side (Inner side) with a primer coat & skin coat on a continuous paint line etc.complete as directed by Engineer-in-charge. Required detailed shop drawing and sample is needs to get approved from the project Architect before execution on the site.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing Ivory Opal series European type wall-hung, of size 400 mm x 370 mm x 575mm with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing Ivory wash basin with half pedestal of size 515mmX615mmX460mm including pillar cock auto-closing system CP angular stop cock long thread of approved make continental including S.S. bottle trap of necessary pipe connection upto the outside face of the wall.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Third Floor

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete

Ground Floor

Third Floor

Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing and fixing sink cock with regular swinging spout (Wall / floor Mounted Model) with wall flange having flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make incluidng other necessary fitting, etc. complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing P.V.C. Rain water pipes of 160mm above outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Terrace Floor

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

Basement floor

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying in walls/ceilings/floors 80 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 8.57 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Terrace Floor

Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Providing and making ISI Mark ferrule connection of 50 mm dia. to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete.

Ground Floor

Providing and laying in trenches 50 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 6.33 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Providing and laying in trenches 80 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 10.15 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Ground Floor

First Floor

Second Floor

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Ground Floor

First Floor

Second Floor

Third Floor

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Basement floor

Ground Floor

First Floor

Second Floor

Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.

Ground Floor

First Floor

Providing and fixing screw down for 65 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Second Floor

Terrace Floor

Providing and fixing screw down for 80 mm. dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Ground Floor

Terrace Floor

Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram)

Ground Floor

Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 Kilogram)

Ground Floor

Providing and fixing 50mm diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber]

Ground Floor

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint)

Ground Floor

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.

Ground Floor

Providing , constructing and fixing 250 mm dia. Inspection chamber made up of UPVC material of thickness 3.5 mm and height of 259 mm with inlet and outlet of 110 mm dia. with 75 mm dia. U Trap, Ultra shaft pipe of Upvc material having height of 470 mm and fixing Ultra 250 mm dia. UPVC cover and frame in 150 mm thick in c.c.1:2:4, having crushed sand bed of 100 mm thick of size 550 mm dia. Including excavation and refilling the sides of chamber by crushed sand cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc. complete.

Ground Floor

Providing , constructing and fixing 450 mm dia. Inspection chamber made up of Polypropylene / polyethylene material of thickness 3.5 mm and height of 388 mm with 160 or 200 mm main inlet (s) outlet and 110 and / or 160 mm branch inlets, with 450 mm dia. Ultra shaft pipe of HDPE material having height of 460 mm, having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc. complete.

Ground Floor

Providing , constructing and fixing 600 mm dia. Inspection chamber made up of Polypropylene / polyethylene material Having 315 mm diameter inlet(s)/outlets and with eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of 5 mm and 600 mm in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete.

Ground Floor

Ground Floor

Ground Floor

Ground Floor

Ground Floor

Ground Floor

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Ground Floor

Providing and laying 100 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

Ground Floor

Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Ground Floor

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Ground Floor

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Ground Floor

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Ground Floor

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.

Ground Floor

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.

Ground Floor

Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram. etc complete

Ground Floor

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10- 25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end- caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Ground Floor

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer.

Ground Floor

Providing and constructing on sewer, B.B. masonry circular manhole with concentric cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 2.00 M with 23 cm brick work in CM 1:4 proportion excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality FRP (Fibre-reinforced plastic). frame and cover of 56 cm dia.etc. complete as directed by Engineerin-charge.

Ground Floor

Providing and constructing on sewer, B.B. masonry circular manhole concentric cone 1.5 M dia. at bottom and 0.5 M dia. at top and upto a depth of 5.00 M with 23 cm brick work, upto depth of 2 M from top and 35 cm thick brick work for balance depth in CM 1:4 proportion with 20 mm thick smooth plaster on both sides in CM 1:2 proportion excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality FRP (Fibre-reinforced plastic) frame and cover of 56 cm dia. etc. complete as directed by Engineerin-charge.

Ground Floor

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast FRP. frame and cover, etc. complete as directed by Engineer-in-charge.As above of 90 x 60 cm internal size and depth upto 1.2 M with FRP. frame and cover.

Ground Floor

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast FRP. frame and cover, etc. complete as directed by Engineer-in-charge.As above of 90 x 90 cm internal size and depth upto 1.2 M with FRP. frame and cover.

Ground Floor

Supplying and erecting PVC trunking (PVCcasing-n-capping) of size 25 mm withaccessories on wall/ceiling as perspecification No WG-MA/CON.

Supplying and erecting PVC slotted boxtrunking of size 75x75 mm. withaccessories on wall/ceiling as perspecification No WG-MA/SLBOX.

Supplying and erecting mains with 2x1.5sq.mm FRLSH copper PVC insulated wirelaid in provided conduit/trunking/insidepole/Bus bars or any other places as perspecification No WG-MA/BW

Supplying and erecting green color earthingwith 1x1.5 sq.mm FRLSH copper PVCinsulated wire laid in providedconduit/trunking/inside pole/Bus bars orany other places as per specification NoWG-MA/BW

Supplying and erecting green color earthingwith 1x2.5 sq.mm FRLSH copper PVCinsulated wire laid in providedconduit/trunking/inside pole/Bus bars orany other places. as per specification NoWG-MA/BW

Supplying and erecting mains with 2x2.5sq.mm FRLSH copper PVC insulated wirelaid in provided conduit/trunking/insidepole/Bus bars or any other places. as perspecification No WG-MA/BW

Supplying and erecting modular type switch6A / 10A duly erected on provided plateand box with wiring connections complete.

Supplying and erecting modular type switch16A duly erected on provided plate andbox with wiring connections complete.

Supplying and erecting modular type 3 pin6A multi socket with safety shutter dulyerected on provided plate and box withwiring connections complete.

Supplying and erecting modular type 3 pin6 / 16A multi socket with safety shutterduly erected on provided plate and box withwiring connections complete.

Supplying and erecting modular type (twomodule) electronic step regulator for fanduly erected on provided plate and box withwiring connections complete.

Supplying and erecting PVC Surfacemodular switch box with double mountingplate for 3 module duly erected.

Supplying and erecting PVC Surfacemodular switch box with double mountingplate for 6 module duly erected.

Supplying and erecting PVC Surfacemodular switch box with double mountingplate for 12 module duly erected.

Wiring for plug on board with Switchsocket surface/concealed type copperwiring and earthing and with modularaccessories as per specification NoWG-PW/CW

Point wiring for light/bell/exhaust fan inPVC trunking (casing-capping) with 1.5sq.mm (2+1E) FRLSH grade copper wiremodular type switch earthing and requiredaccessories as per specification NoWG-PW/SW

Point wiring for ceiling fan in PVC trunking(casing-capping) with 1.5 sq.mm (2+1E)FRLSH grade copper wire modular typeswitch earthing and required accessoriesas per specification No WG-PW/SW

Supplying and erecting fresh air cumexhaust fan of light duty 250 V A.C. 50cycles 225mm. 1400 RPM rust proof body& blades wire mesh duly erectedcomplete.

Supplying and erecting LED square /D:Dcircular Max. 18 W down lighter/ PanelLight having pressure die-cast aluminiumhousing polystyrene diffuser havingsystem lumens output of Min. 2000Lumens min. efficacy of 110 lumen/WCRI>80 CCT upto 6500K Beam Angle of120 deg. max. ripple of 5% THD<10%p.f. >0.95 operating range of 120-270Vsurge protection of 2.5 kV Life class of 50000 Hrs. at L70B50 including driverhaving mounting arrangement with boardfor surface type or spring loaded mountingclips complete with 3 years warranty.

Supplying and erecting LED Panel F60Light(600mm X 600mm) Max. 35 W havingCRCA powder coated housingpolystyrene diffuser having system lumensoutput of Min 4200 Lumens min. efficacyof 120 lumen/W CRI>80 CCT upto 6500KBeam Angle of 120 deg. max. ripple of 5%THD<10% p.f. >0.95 operating range of120-270V surge protection of 2.5 kV Lifeclass of 50 000 Hrs. at L70B50 includingdriver having mounting arrangement withboard for surface type or spring loadedmounting clips complete with 3 yearswarranty.

Supplying and erecting energy savingceiling fan 230 V A.C. 50 cycles 1200 mmcomplete erected in position as perspecification no. FG-FN/CF

Supplying and erecting ready to useRetrofit T8 LED 18 / 20 tube light withpolycarbonate body heat sink integratedHF electronic driver complete & compatibleto T8 / T12 LED luminaire bydisconnecting starter & ballast if necessary.

Supplying, erecting, testing andcommissioning of self contained watercooler 230/250V 50Hz nominal coolingcapacity of 80 litres per hour and storagecapacity 120 litres with partially stainlesssteel body as per specification no.AP-WCR/WC22

Supplying and erecting ultra violet storagetype water purifier (RO+UV+UF) withsoftener for safe drinking water consistingof UV germicidal tube of 8W capacitychoke made of copper wire and twoindicator lamps with output of purified waterminimum 0.33 litre/min with activatedcarbon filter and softener operating on230V single phase A.C. supply with UV fail& filter change indication system .(for TDSmore than 200)

Providing and erecting floor/wall mountingMCCB panel board with door suitable forfour pole incoming 400A 8 ways four poleoutgoing up to 100 A MCCBs on ironframe as per specification no.SW-SWR/MCCBPB. (Excluding MCCBs)

Providing and erecting floor/wall mountingMCCB panel board with door suitable forfour pole incoming 250A 8 ways Four poleoutgoing up to 100 A MCCBs on ironframe as per specification noSW-SWR/MCCBPB. (Excluding MCCBs)

Providing and erecting incoming andoutgoing cable alleys suitable for MCCBpanel board with door 250A incoming and8 way outgoing or 400A incoming and 6way outgoing made from CRCA sheet 1.6mm thick duly powder coated and havingvertical insulated partition for shieldingbetween the shared face of cableway andDB.

Providing and erecting incoming andoutgoing cable alleys suitable for MCCBpanel board with door 250A incoming and12 way outgoing or 400A incoming and 6/8way outgoing made from CRCA sheet 1.6mm thick duly powder coated and havingvertical insulated partition for shieldingbetween the shared face of cableway andDB.

Providing and erecting prewired metermodule suitable for MCCB panel board withCTs and emfs VIF meter.

Supplying and erecting triple pole andneutral distribution board (TPNDB) 3pole/4 pole MCCB as incomer & outgoingSP MCB (24 poles) or TP MCB of 8 ways(24 poles) with door 1.2mm thicknesssurface/flush mounted on iron/GI frame(vertical busbar type) as per specificationno. SW-SWR/MCBDB1

Supplying and erecting triple pole andneutral distribution board (TPNDB) 3 pole/4 pole MCCB as incomer & outgoing SPMCB (12 poles) or TP MCB of 4 ways (12poles) with door 1.2mm thicknesssurface/flush mounted on iron/GI frame(vertical busbar type) as per specificationno. SW-SWR/MCBDB1

Supplying and erecting triple pole andneutral distribution board (TPNDB)SPMCB of 4 ways/phase (12 poles) withdoor 1.2mm thickness surface/flushmounted IP 43 protection on iron/GI frame(horizontal busbar type) as perspecification no. SW-SWR/MCBDB

Supplying and erecting single pole andneutral distribution board (SPNDB) with 2ways for incoming and 10 ways (10 poles)for outgoing SP MCBs with door 1.2mmthickness surface / flush mounted IP 43Protection on iron / GI frame as perspecification no. SW-SWR/MCBDB

Supplying and erecting single pole andneutral distribution board (SPNDB) with 2ways for incoming and 6 ways (6 poles) foroutgoing SP MCBs with door 1.2mmthickness surface / flush mounted IP 43Protection on iron / GI frame as perspecification no. SW-SWR/MCBDB

Providing and erecting 4 Pole MCCB 415V400A rated short-circuit breaking capacity36 kA (Ics=100% of Icu) adjustable thermal(overload) setting and adjustable magneticsetting with provided leads provision forinstallation of shunt/ UV/ trip alarm contactand MCCB should have phase barriersboth sides with insulation withstandcapacity 800V no line-load bias in providedenclosure /panel as per specification no.SW-SWR/MCCB

Providing and erecting 4 Pole MCCB 415V200A rated short-circuit breaking capacity25 kA (Ics=100% of Icu) adjustable thermal(overload) setting and adjustable magneticsetting with provided leads provision forinstallation of shunt/UV/trip alarm contactand MCCB should have phase barriersboth sides with insulation withstandcapacity 800V no line-load bias in providedenclosure/panel as per specification no.SW-SWR/MCCB

Providing and erecting 4 Pole MCCB 415 V100A rated short-circuit breaking capacity25 kA (Ics=100% of Icu) adjustable thermal(overload) setting and fixed magneticsetting with provided leads provision forinstallation of shunt/UV/trip alarm contact.MCCB with phase barriers on both sidesinsulation withstand capacity 800V noline-load bias in provided enclosure/panelas per specification no. SW-SWR/MCCB

Supplying, erecting and marking TPMCB40A to 63A with rated short - circuitbreaking capacity (Icn) 10kA in provideddistribution board as per specification no.SW-SWR/MCB

Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking DPMCB 40A to 63A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking SPMCB 6A to 32A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking SPMCB 6A to 32A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 2 core 6 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL( 34 nos single phase DBx15=510)

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL( power MCCB panel to power TPNDB)

Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface to required depth complete.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials testing & recording the results as per specification no. EA-EP

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No WG-MA/CON

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC( 123 points x 35 mtrs= 4305 mtrs)

Supplying and installing armoured single mode optical fibre cable with 6 fiber core dia 50/125μm (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, fixing, and configuring 24 ports POE switch in provided rack as per specification No. WG-NWC/ENS( ground floor- 2+second floor 2+Third floor1= 7)

Supplying, fixing, and configuring broadband ADSL router with all accessories on provided rack as per specification No. WG-NWC/ADSL

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying, installing, testing and commissioning of single phase input & 1 phase output 1 kVA capacity online pure sine wave UPS with backup time of ....... hrs. PWM & IGBT based with 0.8 to unity output pf complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/17Ah -18Ah SMF battery with battery terminal wire duly charged with 12 months warranty complete

Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 100 mm height comprising all required standard accessories.

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected.

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens min. efficacy of 110 lumen/W CRI>80 CCT upto 6500K Beam Angle of 120 deg. THD<10% p.f. >0.95 operating range of 140-260V in built surge protection of 2.5 kV Life class of 50 000Hrs. at L70B50 including driver IP66 IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades wire mesh duly erected complete.

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire modular type switch earthing and required accessories as per specification No WG-PW/SW

Wiring for plug on board with Switch socket surface/concealed type copper wiring and earthing and with modular accessories as per specification No WG-PW/CW

Supplying and erecting modular type (two module) electronic step regulator for fan duly erected on provided plate and box with wiring connections complete.

Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire modular type switch earthing and required accessories as per specification No WG-PW/SW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW

Supplying and erecting green color earthing with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3 core 4 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting single pole and neutral distribution board (SPNDB) with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs with door 1.2mm thickness surface / flush mounted IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected.

Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board.

Supplying, erecting and marking SPMCB 6A to 32A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials testing & recording the results as per specification no. EA-EP

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

Supplying, Erecting and Commissioning of 2 pole RCCB 16/25A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, Erecting and Commissioning of 4 pole RCCB 40A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

SITC of Electric Traction Passenger Lift with • Rated capacity - 8 Passenger/544Kg • Floors - B+G+3 floor (2 Stops/2 Landings) • Travel - 3 to 4.2 mtrs • Location of Lift Machine - MR/MRL • Rated speed - 1.0 mps VS • Car/Landing door clear opening of 800 mm wide x 2000 mm high • Clear Car size of 1300 mm wide x 1350 mm deep x 2250mm high • Lift shaft available having clear size of 2100 m wide x 2100 mm deep 1500mm Pit depth 1200 mm Overhead. • Doors type - COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). • Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm thick with hairline finish with frame made from MS girders bracing of adequate size with minimum safety factor of 5 with Toe Guard Apron with necessary false ceiling with adequate LED lights blower/fan for ventilation & SS chequered plate flooring handrails mirror emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. • COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI scrolling UP/DN LED indicator & with / without attendant key switch OWD with audio-visual alarm VAS in Marathi Hindi & English with intercom system with telephone instrument in Lift car LMR & FCC/ground floor. • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI Lift car arrival & next travel direction audio-visual indication at all landings. • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent overvoltage over speed overheat for all devices including lift motor and travel direction protection protection for phase loss at input or output etc. various operation modes such as maintenance change direction by attendant full load bypass VIP call operation self levelling operation call cancel facility auto return to The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.Add on B-1 For Full Collective control system For Lift travelling above First floor & up to Sixth floor

SITC of Electric Traction Passenger Lift with • Rated capacity - 10 Passenger/680Kg • Floors - B+G+3 floor (2 Stops/2 Landings) • Travel - 3 to 4.2 mtrs • Location of Lift Machine - MR/MRL • Rated speed - 1.0mps VS • Car/Landing door clear opening of 800 mm wide x 2000 mm high • Clear Car size of 1300mm wide x 1350 mm deep x 2250mm high • Lift shaft available having clear size of 2100 mm wide x 2100 mm deep 1500 mm Pit depth 1200 mm Overhead. • Doors type - COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). • Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm thick with hairline finish with frame made from MS girders bracing of adequate size with minimum safety factor of 5 with Toe Guard Apron with necessary false ceiling with adequate LED lights blower/fan for ventilation & SS chequered plate flooring handrails mirror emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. • COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI scrolling UP/DN LED indicator & with / without attendant key switch OWD with audio-visual alarm VAS in Marathi Hindi & English with intercom system with telephone instrument in Lift car LMR & FCC/ground floor. • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI Lift car arrival & next travel direction audio-visual indication at all landings. • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent overvoltage over speed overheat for all devices including lift motor and travel direction protection protection for phase loss at input or output etc. various operation modes such as maintenance change direction by attendant full load bypass VIP call operation self levelling The above rate includes Fully Comprehensive AMC for one year from the

SITC of Electric Traction Passenger Lift with • Rated capacity - 10 Passenger/680Kg • Floors - G+3 floor (2 Stops/2 Landings) • Travel - 3 to 4.2 mtrs • Location of Lift Machine - MR/MRL • Rated speed - 1.0mps VS • Car/Landing door clear opening of 800 mm wide x 2000 mm high • Clear Car size of 1300mm wide x 1350 mm deep x 2250mm high • Lift shaft available having clear size of 2100 mm wide x 2100 mm deep 1500 mm Pit depth 1200 mm Overhead. • Doors type - COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). • Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm thick with hairline finish with frame made from MS girders bracing of adequate size with minimum safety factor of 5 with Toe Guard Apron with necessary false ceiling with adequate LED lights blower/fan for ventilation & SS chequered plate flooring handrails mirror emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. • COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI scrolling UP/DN LED indicator & with / without attendant key switch OWD with audio-visual alarm VAS in Marathi Hindi & English with intercom system with telephone instrument in Lift car LMR & FCC/ground floor. • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI Lift car arrival & next travel direction audio-visual indication at all landings. • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent overvoltage over speed overheat for all devices including lift motor and travel direction protection protection for phase loss at input or output etc. various operation modes such as maintenance change direction by attendant full load bypass VIP call operation self levelling The above rate includes Fully Comprehensive AMC for one year from the

Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3 core 4 sq. mm. aluminium conductor complete erected with glands & lugs on wall/trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No.CW-EXN-CTR

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing having system lumens output of Min. 4400 Lumens min. efficacy of 110 lumen/W CRI>70 CCT upto 6500K THD<10% p.f. >0.95 operating range of 140-270V inbuilt surge protection of 10 kV Life class of 50 000 Hrs. at L70B50 including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying and erecting Street light bracket for erection of side entry fitting on pole with 40 mm. dia. ‘B’ class G.I. pipe of required length complete as per specification no. FG-BKT/SLB

Supplying and erecting FRP box of size 150mm x 125mm x 100 mm 2.7 mm thick complete on pole/wall as per specification No. CB-SB

Supplying and erecting G.I. pipe pole ‘B’ class 80 mm dia 6 m long with pole cap base plate in provided foundation as per specification no. OH-PL/GIP

Making cement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1 3 6 cement concrete 20 to 25 mm stone metal (45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered with necessary curing and finishing complete. (for 6 m pole)

Supplying and erecting minimum Three & above star rated submersible pump set of 3.75 KW/5 HP with 415 V 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 60 to 290 LPM discharge at 112 to 12 m head & discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP

Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s. A.C. supply having delivery head from 43 to 11m and discharge from 120 to 840 litres. per minute & pipe of Suction 65mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP

Supplying and erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting automatic control panel for 3 Phase 415 volt A.C Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP S.P.P. Combined ammeter/ voltmeter phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing phase reversal phase imbalance etc .

Supplying and erecting automatic control panel for 3 Phase 415 volt A.C Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP S.P.P. Combined ammeter/ voltmeter phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing phase reversal phase imbalance etc .

Supplying and erecting high density polythene pipe ISI mark 40 mm dia. suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete.

Carrying out core cutting of size 3 to 5 diax 15 length in the C.C./rock/stone wall withthe help of specialized core cuttingmachine in proper manner and finishing thesite as original.( reduce rate by 20%)

Supplying and erecting iron work sheetmetal work consisting of CRCA sheetsvarious sections of iron plateschequered plates rods bars MS pipesetc. for panel board or any other purposewith bending cutting drilling and weldingcomplete erected at the position withnecessary materials duly painted withone coat of red oxide and two coats ofenamel paint to match the switchgears oras per directions by the authority.

Supplying, erecting & terminating FR XLPEinsulated galvanised steel formed wirearmoured (strip) cable 1100 V 3 core 10sq. mm. aluminium conductor completeerected with glands & lugs on wall/trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPEinsulated galvanised steel formed wirearmoured (strip) cable 1100 V 3½ core 50sq. mm. aluminium conductor completeerected with glands & lugs on wall/trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL

"Supplying, erecting & terminating FR XLPEinsulated galvanised steel formed wirearmoured (strip) cable 1100 V 3½ core120 sq. mm. aluminium conductorcomplete erected with glands & lugs onwall/ trusses/pole or laid in provided trench/pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation)of suitable width & depth up to 90 cm) 146mm outside dia. double wall corrugatedpipes (DWC) of HDPE for enclosing cablebelow ground/road surface to requireddepth complete.

Providing and erecting hot dippedgalvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick)GI sheet of 300 mm width & 100 mm heightcomprising all required standardaccessories.

Providing earthing with galvanized ironearth plate size 60 x 60 x 0.6 cm completewith all materials testing & recording theresults as per specification no. EA-EP

Supplying and erecting GI strip of highpurity required size used for earthing onwall and/or any other purpose withnecessary GI clamps fixed on wall paintedwith bituminous paint with joints required.As per specification no EA-EP.

Supplying and erecting automatic controlpanel for 3 Ph 415 volt A.C.Submersible/centrifugal pump set up to 7.5HP - 10 H.P. consisting of DOL starterhaving relay range 28-42 AMP S.P.P.Combined ammeter/voltmeter phaseindicating lamp enclosed in CRCA powdercoated Vibration proof enclosure with IP 54protection. Control Panel should offersingle phasing phase reversal phaseimbalance etc.

Supplying, installing, testing andcommissioning of main fire pump (MFP /EP) suitable for water discharge of 2280 to2850 LPM at 90 to 70 m head driven byelectric motor 415 volts 3 phase 50 Hz ACsupply of 55kW or of suitable kW capacityfor manual/automatic operation andconsisting of following(a) Horizontal type single stagecentrifugal/split casing pump of cast ironbody & bronze impeller with stainless steelshaft (SS410 grade) mechanical sealconforming to IS 1520.(b) Squirrel cage induction motor TEFCsynchronous speed 3000 RPM suitable foroperation on with IP 55 protection forenclosure horizontal foot mounted typewith Class-'F' insulation conforming toIS-325.(c) M.S. fabricated common base platecoupling coupling guard foundation boltsetc. as required.(d) Erected on provided suitable sizecement concrete foundation duly plasteredwith anti vibration pads with perfect aligningproper levelling complete pump set withaccessories duly painted with two coats ofsynthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as perIS 2932 of 2003) complete as perspecification no. FF-MFP/SSC/EP

Supplying, installing, testing andcommissioning of jockey fire pump (JP)suitable for water discharge of 180 to 240LPM at 90 to 70 m head driven by electricmotor 415 volts 3 phase 50 Hz AC supplyof 9.3 kW or of suitable kW capacity formanual/automatic operation and consistingof following(a) Horizontal/vertical type multi stagecentrifugal casing pump of cast iron body &bronze impeller with stainless steelshaft(SS410 grade) mechanical sealconforming to IS 1520.(b) Squirrel cage induction motor TEFCsynchronous speed 3000 RPM suitable foroperation with IP 55 protection forenclosure horizontal foot mounted typewith Class-'F' insulation conforming toIS-325.(c) M.S. fabricated common base platecoupling coupling guard foundation boltsetc. as required.(d) Erected on provided suitable sizecement concrete foundation duly plasteredwith anti vibration pads with perfect aligningproper levelling complete pump set withaccessories duly painted with two coats ofsynthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as perIS 2932 of 2003)complete as perspecification no. FF-MFP/JP

Supplying, installing, testing andcommissioning of booster fire pump [BP]suitable for water discharge of 900 LPM at35 m head driven by electric motor 415volts 3 phase 50 Hz AC supply of 7.5 kWor of suitable kW capacity formanual/automatic operation and consistingof following(a) Horizontal/vertical type single/multistage centrifugal casing pump of cast ironbody & bronze/CI impeller with stainlesssteel shaft (SS410 grade) mechanical sealconforming to IS 1520.(b) Squirrel cage induction motor TEFCsynchronous speed 3000 RPM suitable foroperation on with IP 55 protection forenclosure horizontal foot mounted typewith Class-'F' insulation conforming toIS-325.(c) M.S. fabricated common base platecoupling coupling guard foundation boltsetc. as required.(d)Erected on provided suitable sizecement concrete foundation duly plasteredwith anti vibration pads with perfect aligningproper levelling complete pump set withaccessories duly painted with two coats ofsynthetic enamel paint of fire red colourover a coat of primer (ISC code 536 as perIS 2932 of 2003) complete as perspecification no. FF-MFP/BP

Supplying, installing, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following (a) Horizontal type single stage centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade) mechanical seal conforming to IS 1520. (b) Water cooled with radiator diesel engine conforming to relevant IS standard complete with auto starting mechanism 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v 50Hz AC supply diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding residential silencer instruments and protection as per standard specification stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate coupling coupling guard foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-MFP/SSC/DP

Supplying and erecting G.I. pipe ‘C’ classERW 25 mm dia with necessary fittingscomplete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ classERW 50 mm dia with necessary fittingscomplete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ classERW 65 mm dia with necessary fittingscomplete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ classERW 75/80 mm dia with necessary fittingscomplete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ classERW 100 mm dia with necessary fittingscomplete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ classERW 150 mm dia with necessary fittingscomplete as per specification no. FF-PP

Providing G.I. pipe ‘C’ class ERW 200 mmdia with necessary fittings complete as perspecification no. FF-PP

Providing coating of bitumen paint & 4mmthick wrapping for underground 100 mmring main of fire fighting system.

Providing coating of bitumen paint & 4mmthick wrapping for underground 150 mmring main of fire fighting system.

Supplying and erecting 80 mm dia castiron foot valve ball type/flap type withstrainer for negative suction complete asper specification no. FF-VL/FV

Supplying and erecting 100 mm dia castiron foot valve ball type/flap type withstrainer for negative suction complete asper specification no. FF-VL/FV

Supplying and erecting 100 mm dia CastIron end line strainer of Y-type flanged endpattern PN16 pressure rating SS screenend connection with Flanged / Screwed /Socket Weld / Butt Weld End etc withstandard OAR (open area Ratio) forpositive suction complete as perspecification no. FF-VL/ELS

Supplying and erecting 200 mm dia CastIron end line strainer of Y-type flanged endpattern PN16 pressure rating screen ofSS end connection with Flanged / Screwed/ Socket Weld / Butt Weld End etc withstandard OAR (open area Ratio) forpositive suction complete as perspecification no. FF-VL/ELS

Supplying and erecting 100 mm dia. castiron double flange sluice valve completewith PN16 pressure rating as perspecification no. FF-VL/SV

Supplying and erecting 150 mm dia. castiron double flange sluice valve completewith PN16 pressure rating as perspecification no. FF-VL/SV

Supplying and erecting 200 mm dia. castiron double flange sluice valve completewith PN16 pressure rating as perspecification no. FF-VL/SV

Supplying and erecting 50 mm dia. castiron double flange butterfly valve of sizecomplete with PN16 pressure rating asper specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia. castiron double flange butterfly valve of sizecomplete with PN16 pressure rating asper specification no. FF-VL/BFV

Supplying and erecting 100 mm dia. castiron double flange butterfly valve of sizecomplete with PN16 pressure rating asper specification no. FF-VL/BFV

Supplying and erecting 150 mm dia. castiron double flange butterfly valve of sizecomplete with PN16 pressure rating asper specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia castiron double flange ball type NRV completewith PN16 pressure rating as perspecification no. FF-VL/NRV

Supplying and erecting 100 mm dia castiron double flange ball type NRV completewith PN16 pressure rating as perspecification no. FF-VL/NRV

Supplying and erecting 150 mm dia castiron double flange ball type NRV completewith PN16 pressure rating as perspecification no. FF-VL/NRV

Supplying and erecting 20 mm dia gunmetal gate valve complete with PN16pressure rating as per specification no.FF-VL/GV

Supplying and erecting 25 mm dia gunmetal gate valve complete with PN16pressure rating as per specification no.FF-VL/GV

Supplying and erecting stainless steelsingle outlet hydrant valve fitted withnecessary accessories complete as perspecification no. FF-VL/HV

Supplying and installing wall mountingswinging hose reel drum fitted with 19 mmdia. 30m long high pressure polypropylene(Polyhose) along with necessaryaccessories complete as per specificationno. FF-FFA/HV

Supplying and erecting 63mm diareinforced rubber lined (R.R.L.) hose pipe15m in length fitted with necessaryaccessories complete as per specificationno. FF-FFA/RRL

Supplying and erecting stainless steelbranch pipe 63 mm dia fitted with 20 mmdia detachable hexagonal nozzle completeas per specifications no. FF-FFA/NZ

Supplying and erecting 150 mm dia firebrigade header suitable for supplying waterin fire tank complete as per specificationno. FF-FA/FBC

Supplying and erecting fire brigade header( Siamese connection )of 150 mm dia forsupplying water in fire tank complete asper specification no. FF-FA/FMC

Supplying and erecting 300 mm dia 1.5min height air vessel / tank fabricated frommin 5mm thick M.S. sheet complete as perspecification no. FF-FFA/ACT

Supplying and erecting 20/25mm dia gunmetal air release cock with necessaryG.I. coupling to be fitted on top of airvessel or on wet riser complete as perspecification no. FF-FFA/ARV

Supplying and erecting 100 mm dia.pressure gauge 0-300 PSI or 0-14 kg percm square fitted with 12/15 mm dia. padcock valve erected with provided G.I. pipeelbow etc. complete as per specificationno. FF-FFA/PG

Supplying and erecting 12/15 mm diapressure switch with provided isolationvalve G.I. nipple elbow etc complete asper specification no. FF-FFA/PS

Supplying and erecting brass orifice platehaving 6 mm. thickness 140 mm outer diawith required diameter of inner hole atevery single outlet hydrant valve as perspecification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinetfor housing Floor Hydrant valve hosepipe hose reel and branch pipe (size1000 x 736 x 736 mm.) made from 16SWG sheet and angle iron 25 x 25 x 4mm. having front doors with viewing glass(8 x6 ) and locking arrangement withnecessary fixing material such as rubberbidding etc. duly painted in post box redcolour( Code 538 of IS 5)

Supplying, installing, testing andcommissioning of FR XLPE armouredcable 2 core 1.5 sq.mm. copper conductorcomplete erected on wall/ ceiling completeas per specification no. CB-LT/CU

Supplying, installing, testing andcommissioning of FR XLPE armouredcable 8 core 1.5 sq.mm. copper conductorcomplete erected on wall/ ceiling completeas per specification no. CB-LT/CU

Supplying, installing, testing andcommissioning of micro processor basedintelligent addressable main fire alarmpanel central processing unit with the 4loop capacity and capable of supportingupto 250 devices and detectors per loopwith on-board LCD display with min 16lines of text operating at 230 V 50 HZ -AC with inbuilt Battery Backup of aminimum 24 hours in normal condition and30 min in alarm condition suitableprovision for network connectivityinterfacing with third party equipment via aMODBUS/ OPC/ L-ON interface etc.conforming to IS 15908 2021 IS 21892008 EN 54 & VDS / FM/ UL 864 (10thedition) with 3 years replacement warrantyFF-AFAS/CP.

Supplying, installing, testing andcommissioning of repeater panel withsuitable battery backup of a minimum of 24hours in normal condition and 30 min inalarm condition 80 backlit alphanumericLCD display with inbuilt buzzer to indicatefault/fire alarm manual control keys forsilence/mute and to reset the FACP fromthe repeater station. Panel size shall notmore than 175 x 275 x 65 mm conformingto EN 54 or UL approved with 3 yearsequipment replacement warrantyFF-AFAS/RP

Supplying, installing, testing andcommissioning of addressable opticalsmoke detector single/twin LED’s with 360degree view suitable for low voltage 15 to32 V DC two wires supply in-built lockingmechanism to check the removal andpilferage of the detector in built isolationmode start up current 300µA and alarmcondition current shall be maximum 6.5 mAoperating temperature 0°C to 50°Chumidity 0-95% RH IP 41 conforming toIS 2189 2008 11360_1985_Reff2020 EN54 or UL Approved with 3 years equipmentreplacement warranty FF-AFAS/SD .

Supplying, installing, testing andcommissioning of intelligent addressablethermal/heat detector with rate of rise cumfixed temperature thermistor complete withbase as required suitable for temperaturevariations from -20°C to 38°C for fixed-heatand rate-of-rise type detectors and 0°C to66°C for high heat type detectors in builtisolation mode suitable for offices/ceilingcable trenches/less ventilation area's etc.with 3 years equipment replacementwarranty IS 2175 - 1988 reaffirmed 2000IS 15908 2021 standards FF-AFAS/SD.

Supplying, installing, testing andcommissioning of addressable manualcall points ( break glass type/pull stationtype) made of addressable break glassplastic square in shape surface/flushmounted with Break Glass massageembedded on the glass complete erectedwith mounting base and requiredaccessories conforming to EN 54 or ULlisted with 3 years equipment replacementwarranty FF-AFAS/MCP.

Supplying, installing, testing andcommissioning of addressable horn cumstrobe sound/ hooter output frequency 500to 1000 Hz with dB as per Chart given in IS15908 2021 with flashing at 1 Hz over thestrobe’s entire operating voltage range EN54 conforming to IS 2189 2008 IS 159082021 standards with 3 years equipmentreplacement warranty FF-AFAS/SSH.

Supplying, erecting, testing andcommissioning of 120 W amplifier suitableto operate on 230 Volts A.C. / 12 VoltsD.C. supply complete as per specificationno. FF-PA/AFR

Supplying, erecting, testing andcommissioning of 15 to 30 Watts soundcolumn or ceiling mounted complete asper specification no. FF-PA/SOC

Supplying, erecting, testing andcommissioning of stand mounted/handheldtype wired microphone having 2 mV/Pasensitivity impedance level limit 300 ohmsand 50 - 16000 Hz suitable to operate in-10 deg C to +55 deg C with min. 7 metreshielded cable and 3 Pin Professional XLRConnector stereo jack complete as perspecification no. FF-PA/MIC

Supplying, erecting, testing andcommissioning of rust free microphonefloor stand of chrome plating/powdercoating or S.S. material 500 mm to 1500mm height and sturdy mechanismensuring trouble free movement complete.

Supplying, erecting, testing andcommissioning of 2 core shielded cablecomplete as per specification no.FF-PA/MCC

Supplying, erecting, testing andcommissioning of quartzoid bulb sprinkler15 mm (½ ) dia. NBCM Body chromefinished 68r C fixed temperature ratingwith deflector disc of conventionalconstruction complete as per specificationno. FF-SPR.

Supplying, erecting, testing andcommissioning of vane type water flowdetector 100 mm dia. with 1) Visual switchactivation 2) Rugged switch assembly 3)Heavy duty aluminium pipe saddles4)Durable metal enclosure 5) Steel U boltsfor secure mounting 6) Two SPDT ( Singlepole double track ) synchronised switches7) serviceable without draining pipes.

Supplying and erecting fire resistant mortar(20 kg) with fire resistance class S90 asper National Electrical Code (NEC)SP30-2011 suitable to seal the openings ofall kinds of cables pipes and cable supportsystem in steel aluminium and plasticprofiles ( except hollow core conductors).The residual openings shall be closed withfiller as per specification no FF-FRM.

Supplying and erecting Carbon Dioxide(CO2) fire extinguisher of 4.5 kg. capacitycartridge type conform to IS 2878 /15683complete erected with necessary clampmade from 50 x 6 mm. M. S. flat with nut &bolts routed in wall complete.

Making trench in Hard murum/Tar roadhaving 0.75 m depth and minimum 0.3mtrwidth as per IS for laying provided cablesup to voltage level 1.1Kv cable completeas per specification No. CW-EXN-CTR

Making cement concrete foundation in 1 24 cement concrete with foundation boltsand nuts complete. (cost of wooden box isincluded) (for pumps).

Supplying & installation auto glow (Viewingupto 15 mtr length) fire signages viz firhydrant Fir Extinguishers Fire Exit Firedoor Fire house box ect. Size of 600x200mm(NonCSR)

Manan Constructions, sangli

Madhukamal Construction Pvt. Ltd