Special Repair and Maintenance of Rest House at Kavaratti

Amount

Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 square centimetres and above.

Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead.For thickness of tiles above 10 mm and upto 25 mm

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-I class Karimaruthu or equivalent ( hold fast lugs or dasg fastener shall be paid for separately )

Providing and fixing karimaruthu wood or equivalent 25 mm squre wooden bars at required spacing in wooden frames of windows and clerestory windows

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position :

Providing and fixing 30 mm thick panelled, glazed orpanelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class Karimaruthu or equivalent

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate,with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia.

Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 300 x 16 mm

Providing and fixing anodised Aluminium tower bolt (barral type) anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete 225x10mm

Providing and fixing anodised Aluminium handle anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 100 mm

Providing and fixing anodised Aluminium hooks and eyes anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. 100 mm each

Providing and fixing Bright finished brass door stoper with rubber cusion & necessary screws .

Providing and fixing 100mm Bright finished brass mortice latch and lock with 6 levers and a pair of lever handles with necessary screws .

Providing and fixing 4mm Bamboo board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): Bamboo board 4mm thick

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275gm/sqm

Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2

Dismantling cement asbestos, Celotax or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-incharge.

Dismantling doors,windows and clerestory windows(steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sqm and below

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :Cement mortar 1:4

12mm cement plaster 1:4(1cement :4 metal sand)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications two or more coats applied on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10

Painting with synthetic enamel paint of approved brand and manufacture of required colourtogive aneven shade One or more coats on old work.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of Fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. Internal work 110 mm nominal bore

50 mm nominal bore (6 kg/Sqcms)

50 mm nominal bore (6 kg/Sqcms)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chasesand making good the walls etc.,) 25 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 32 mm nominal outer dia .Pipes.

Providing anf fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seatandlidandrubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required.

Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap.

Providing anf fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers.

Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed ritting arrangement of approved quality and colour 600 mm long towel rail brackets with total length of 645 mm,width 78mm and effective height of 88 mm ,weighing not less than 190 gms.

Providing and fixing 100 mm PVC grating for gully trap.

Providing and fixing C.P. Brass bib cock of approved quality and manufacture complete. 15 mm nominal bore

Providing and fixing C.P. Brass stopcook of approved quality and manufacture complete. 15 mm nominal bore

Providing and fixing CP brass angle cock of approved quality and manufacture complete.15 mm

12.30 Providing and fixing CP wall mixure tap for hot and cold water of standard design and of approved quality and manufacture complete.15 mm

Providing and fixing health faucet of approved quality and manufacture complete.

Providing and fixing CP brass Sink cock of approved quality and manufacture complete.20 mm

ProvidinganffixingStailesssteelAISI304(18/8)kitchensink asper IS 13983 with CI brackets stainless steel plug 40 mm ,including painting of fittings and brackets, cutting and making good the walls where required. With out drain board 450x400x250 mm

Providing and fixing ball valve ( brass ) of approved quality and manufacture complete. 15 mm nominal bore

Providing and Fixing C P Shower rose with 15 to 20 mm inlet, 100 mm dia

Providing and placing sintex tank on terrace ( at floor level ) polythene water storage tank ISI : 12701 marked,with cover and suitable locking arrangement and making necessary holes forinlet ,outlet and over flow pipe but without fittings and the base support for tank 500 Ltr Capacity

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The doorframe to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-inCharge.

Providing and fixing to existing doorframes. 25mm thick PVC flush door shutters upto 737mm width of colour and shade as approvedbyEngineer-in-charge madeoutofa onepiece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An MS tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures’ specification and drawing to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places

Cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc…complete a) 40mm thick with 20 mm nominal size stone aggregate Sqm

Dismantling of flushing cistern of all types (C.I/PVC/Vitrious china) including stacking of useful materials near the site and disposalofunservicablematerialswithin 50metresleadasper direction of Engineer-in-Charge

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 ( thickness to be specified by the manufacture ) of approved make,in all colours,shades except burgundy ,bottle green,black of any size as approved by engineer-in-charge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 ( 1cement, 3 metal sand ) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture ) of first quality confirming to IS:15622 of approved make,in colours such as White ,ivory,Grey,Fume red brown,laid on 20 mm thick cement mortar 1:4 ( 1cement, 4 metal sand ) and joining with white cement and matching pigment etc... complete.

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texturelaid over20mm thickbase cementmortar1:4(1 cement : 4 metal sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm sqm

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil.

Cement concrete block (machine moulded) masonry in in Foundation and plinth in CM 1:6 with blocks of size 40cmx20cmx15cm.

Providing and laying cement concrete 1: 3:6 ( 1 cement: 3 M.Sand:6 granite chips ) all work up to plinth level.

Providing and fixing precast cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4 graded stone aggregate 20mm nominal size) set in position with cement mortar 1:2 (1 cement :2 fine sand) and finishedsmoothwith6mm thickcementplaster 1:3 (1 cement:3 fine sand) on exposed surfaces including centering and shuttering in

Coldtwistedsteel reinforcement forR.C.C. workincludingbending, binding and placing in position complete.

ABDUL RAFEEKH P V

Abdul Latheef T P

bazil ali

SAMEER RIYAS